Repair/painting to certain steel furniture, repair/replacement of charpoy GI Nylon newar with 12mm ply top and repair to certain modular furniture at CME under GE (CME) kirkee

Amount

A) Removal of following existing unserviceable steel/UNSV components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, gluing, providing hinges, denting, applying putty for levelled surface, placing every part in-tact and painting the disturbed portion, as applicable as per drawings. B) Work will be executed where the furniture exist in different User Units/ Faculty of GE (CME) Kirkee including BSO's Furniture Yard as directed by Engineer-in-Charge.

ALMIRAH LARGE STEEL (FD- 1031 or similar):

3-Way locking system as per drg

Lock as per sample kept with BSO.

Handle as per as per sample kept with BSO.

Leg as per drg

Shelf as per drg

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

M & L Painting to almirah large internally and externally with one coat of synthetic enamel paint of existing color after preparation of surfaces including denting, grinding, emery and applying putty.

ALMIRAH STEEL MEDIUM:-FD-67(M)/243/350 /1032:-

3-Way locking system as per drg

Lock as per sample kept with BSO.

Handle as per sample kept with BSO.

Leg as per drg

Shelf as per drg

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

M & L Painting to almirah medium internally and externally with one coat of synthetic enamel paint of existing color after preparation of surfaces including denting, grinding, emery and applying putty.

LOCKER BED SIDE STEEL, FD- 257/1029

Aluminium hasp and staples as specified in drg and approved by the Engineer-in-Charge.

CP steel conduit pipe 16mm dia 22 G as per drawing

Handle as per sample kept with BSO.

Foot rest (Legs) made out of 1mm thick sheet as specified in Drg.

M & L Painting internally and externally with one coat of existing paint colour of synthetic enamel paint as approved by Engineer-in-Charge after preparation of surfaces including denting, grinding, emery and applying putty.

BED HARD, FD/E6MAP/08(R)

12mm thick BWR Grade plywood placed in position fitted with 30/35mm long nut bolts and wahers as shown in drg.

18/19mm thick prelaminated MDF board placed in position for headrest by providing PVC beading alround the edges and duly fitted with screws as shown in drg.

18/19mm thick prelaminated MDF board placed in position for footrest by providing PVC beading alround the edges and duly fitted with screws as shown in drg.

Rubber shoes 32mmx32mm of high quality placed in position as shown in drg.

M & L Painting to bed hard steel of all steel surfaces with one coat of synthetic enamel paint of existing colour after preparation of surfaces inluding grinding, emery and applying putty.

CHARPOY IP HARD TOP, FD/MAP-II/01

12mm thick BWR grade plywood by fixing with specific nut, bolts and washers.

25mmx25mmx16mm stiffeners of MS tube thorough welding at spot.

32mmx32mm rubber shoes to the legs of charpoy.

M&L of one coat of synthetic enamel paint of existing colour on all steel portion of charpoy after grinding, emery and applying metal putty wherever necessary all as specified and directed.

CHARPOY FOLDING IP, FD-388

Ply of 8/9mm thick BWR grade ply placed in position by necessary drilling and duly tightening with nut and bolts as shown in drg.

25mmx6mm flat iron stay as shown in drg.

Rubber shoes 25mm dia of high quality placed in position as shown in drg.

Materials and labour one coat of synthetic enamel paint of existing colour on all steel portion of charpoy after grinding, emery and applying metal putty wherever necessary all as specified and directed.

BOOK CASE STEEL, FD-1028

1mm thick front frame and fixing it properly as per size shown in drg.

3mm thick plain glass of size 660mm x 260mm and fitted inside frame as shown in drg.

2 way lock as shown in drg.

100mm long steel handles as shown in drg.

M&L one coat of synthetic enamel paint of existing colour on all steel portion after grinding, emery and applying metal putty wherever necessary all as specified and directed.

TABLE DINING ORS :FD-165

Table top of size 1900mmx685mm made of 18mm thick BWR grade plywood over 1mm thick aluminium sheet fixed with proper workmanship by folding the sheets along the edges.

Legs of 25mm square tube of MS 1.6mm thick and 760mm long by continuous welding to table dining ORS all as per drawing, complete all as specified and directed

Centre bottom stiffener of 25mm square tube of MS 1.6mm thick and 1360mm long by continuous welding to table dining ORS all as per drawing, complete all as specified and directed by Engr-in-charge.

Centre stiffener width wise of 25mm square tube of MS 1.6mm thick and 470mm long by continuous welding to table dining ORS all as per drawing, complete all as specified and directed.

Rubber shoes 25mm square as per drg

M & L Painting to table in all steel surface with one coat of synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery and applying putty.

TABLE 900X900X760 Steel :FD-1009 or Similar

Table top of size 900mmx900mm made of 18mm thick prelaminated MDF board including polished 4mm thick teak wood edging all as per drg.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg thorough continuous gas welding.

Stiffeners as per drg.

Shoes all as per drg.

M & L Painting to table internally and externally with one coat of synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery and applying putty.

TABLE 900X600X760MM WITH DRAWERS, FD-1008

Table top of size 900mmx600mm made of 18mm thick prelaminated MDF board including polished 4mm thick teak wood edging all as per drg.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Shoes all as per drg.

Drawer complete all as per drg.

M & L Painting to table internally and externally with one coat of synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery, applying putty.

TABLE OFFICE CLERK STEEL: FD-84, 381, 1004 or similar.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg.

Drawer complete all as per drg.

Stiffeners as per drg.

Shoes all as per drg.

Table top of size 1200mmx600mm made of 18mm thick prelaminated MDF board including polished 4mm thick teak wood edging alround all as per drg

M & L Painting to table internally and externally complete with one coat of synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery and applying putty.

TABLE OFFICE OFFICER STEEL: FD- 1003 or similar.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg

Drawer of table duly painted as per drg

Stiffeners as per drg

Shoes all as per drg

Table top of size 1370mmx760mm made of 18mm thick prelaminated MDF board including polished 4mm thick teak wood edging alround all as per drg

M & L Painting to table of all steel surfaces with one coat of synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery and applying putty.

TEAPOY VERANDAH, FD-255/383

Top of 18/19 mm thick prelaminated MDF board of size 900mmx450mm placed in position at top with 4mm thick teak wood edging alround the edges of the top and fitted with screws as shown in drg.

25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position as shown in drg.

Rubber shoes 18mm square of high quality placed in position as shown in drg.

M & L Painting to teapoy verandah of all steel surfaces with one coat of synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery and applying putty wherever necessary all as specified and directed.

TEAPOY VERANDAH, FD/E6/MAP/17

Top of 18/19 mm thick prelaminated MDF board of size 750mmx450mm placed in position at top and fitted with screws with 4mm thick teak wood edging alround the edges of the top as shown in drg.

18mm Sq MS pipe for legs of teapoy of 522 mm length welded to adjacent part as shown in drg.

5mm dia MS bars at base tray with proper welding with frame of tray as shown in drg.

Rubber shoes 18mm square of high quality placed in position as shown in drg.

Materials and labour one coat of synthetic enamel paint of existing colour on all steel portion after grinding, emery and applying metal putty wherever necessary all as specified and directed.

RACK SIX TIERS STEEL, FD-1038 or similar

Back to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Side to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Shelves to rack six tiers steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

Materials and labour one coat of synthetic enamel paint of existing colour on all steel portion of rack complete after preparation of surfaces including grinding, emery and applying putty all as specified and directed

CHAIR TUBULAR STEEL Type 'A' WITH ARMS : FD-75(M)

Materials and labour one coat of synthetic paint of existing colour on all steel portion complete after preparation of surfaces including grinding, emery and applying putty all as specified and directed.

02 Nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat alongwith supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm.

Back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Arm rest made of teak wood duly polished in natural shade as per drg.

Hard rubber shoes as per drg

Rubber cap for conduit pipe as per drg

CHAIR TUBULAR STEEL Type 'B' WITHOUT ARMS : FD-75(M)

Materials and labour one coat of synthetic enamel paint of existing colour on all steel portion complete after preparation of surfaces including grinding, emery and applying putty all as specified and directed.

02 Nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Hard rubber shoes as per drg

Rubber cap for conduit pipe as per drg

Desk student steel

Pre laminated MDF board of top, bottom and back along with both sides of desk student steel with 4 mm thick teak wood beading all round duly french polished and with suitable screw as in original to fix or as directed by Engr-in-charge.

M & L painting to steel surface of the desk complete with one coat of synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery, applying putty all as specified and directed.

TABLE 900X600X760MM Steel, FD-1007 or similar

Table top of size 900mmx600mm made of 18mm thick prelaminated MDF board including polished 4mm thick teak wood edging all as per drg.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Shoes all as per drg.

M & L Painting to table internally and externally with one coat of synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery, applying putty all as specified and directed.

Ply wood from Charpoy GI ply top 32 mm, tightening each part of the entire frame of charpoy (i.e long rail, short rail, legs, elbow, check nut etc) by using pipe wrench whether loose or dismantled. Supply and fixing new 12 mm thick BWP Grade ply wood of ISI marked (Make: Green ply/ Duro/ century ply) with new GI carriage bolt, nut and washers of size 6mm dia 62 to 65mm long or as directed by GE/Engr-in-charge.

New elbow GI 32mm dia 3 way medium grade ISI marked all as specified and as shown on drawing Drg No.FD-220.

New long rail of 32mm dia medium grade GI pipe in lieu, duly threaded at both ends, confirming to IS, all as specified and as shown on drawing. (Ref Drg No.FD-220)

Cutting and threading of old existing damaged long rail of the GI charpoy retreived from sl No- 23 above, and converted into short rail and fixing in the charpoy GI Pipe, all as specified and shown in drgs or as directed by Engr-in-charge. (Ref Drg No.FD-220)

Cutting and threading of old Unsv short rail of the GI charpoy retreived from sl No- 24 above,and converted into legs of size 440mm long, incl FMN set arrangement/ clamps duly welded along with fixing of 3 mm thick MS sheet at bottom of legs. All as specified and shown in drgs or as directed by Engr-in-charge. (Ref Drg No.FD-220)

GI check nut 32mm dia medium grade of ISI marked all as specified and shown in drgs or as directed by Engr-in-charge. (Ref Drg No.FD-220)

Angle iron 25 x 25 x 05 mm two numbers shall be provided in equidistant of long rail by means of continuous welding at top of long rail to fix plywood without leaving gap. Angle iron shall have proper hole to fix plywood as directed by Engineer-in-charge.

Flat iron 25 x 4 mm cleat of length 60mm shall be made to shape and fixed through continuous welding to each long rail – 2 Nos and each short rail – 2 Nos in equidistant. cleat shall have proper hole to fix plywood, as directed by Engineer-in-charge.

M & L for All steel sections shall be painted with two coats of synthetic enamel paint of silver grey colour over a coat of red oxide zinc chrome primer after preparation of surface, or as directed by Engr-in-charge.

Chair writing (Drg. No. FD/E6/MAP/03 or similar TP )

M & L for Upholstry of Tapestry cloth of seat & back, along with malmal cloth to covering the seat and back of chair. Tapestry cloth should not be less than Rs. 200/- Mtr along with PVC lipping around the back of chairs as directed by Engr-in-charge.

Seat and Back of chair, duly fitted with 12 mm thick ply BWR grade with 50 mm thick moulded cushion of 40 density, duly with upholstry as existing in orginal pattern/ in drgs along with PVC lipping around the back of chairs or as directed by Engr-in-charge.

Handle of chair as existing duly fitted with fixing arrangement or as directed by Engr-in-charge.

M&L for spray painting to steel frame after preparation of surface one coat of high quality synthetic enamel paint to obtain glosy finish as in original existing colour.

Chair classic (Drg No. (CH-7B) -Godrej-07 )

Removing of old/existing rexine cloth from seat and back of chair classic CH-7B and upholstry the same with new rexine cloth, rexine should not be less thanRs. 160/ Mtr.

Back of chair, duly fitted with 12 mm thick BWR grade plywood with 50mm thick cushion of 40 mm density, along with screw as per sample for fitting, with complete upholstry with rexine cloth as in original shown in drgs or as directed by Engr-in-charge.

Seat of chair, duly fitted with 12 mm thick BWR grade plywood with 50mm thick cushion of 40 mm density, along with screw as per sample for fitting, with complete upholstry with rexine cloth as in original shown in drgs or as directed by Engr-in-charge.

M & L for Painting of chairs with one coat of synthetic enamel paint of existing colour after preparation of surfaces including grinding, emery and applying putty wherever required as directed by Engr-in-charge.

PVC handle duly fitted with fixing arrangement with arms chair as directed by Engr-In-charge

Hard rubber shoes as per drg

Rubber cap for conduit pipe as per drg

Chair computer revolving (high Back and Mid Back) Drg. No. FD/E6/MAP/03 or similar TP

Upholstry of Tapestry cloth of seat & back, along with malmal cloth to covering the bottom / back of seat and back. Tapestry Cloth should not be less than Rs.200/Mtr, to make complete as shown in drgs along with PVC lipping around the back of chairs or as directed by Engr-in-charge.

Hydraulic gas lift as directed by Engr-in-charge.

Handle duly with fixing arrangement as directed by Engr-in-charge.

M&L Painting to steel frame after preparation of surface one coat of high quality synthetic paint to obtain glosy finish as in original existing colour as directed by Engr-in-charge.

New caster wheels as directed by Engr-in-charge.

50 mm moulded foam with 40 density along with tapestry cloth of not less than Rs.200/Mtr for seat of chair as directed by Engr-in-charge.

50 mm moulded foam with 40 density along with tapestry cloth of not less than Rs.200/Mtr for seat of chair as directed by Engr-in-charge.

Computer table (Drg No. FD/E6/MAP/03 or similar TP)

Drawer with 4mm thick teak wood beading polished alround and both side telescopic channel with complete arrangements for fixing them in table computer as directed by Engr-in-charge.

Keyboard with 4mm thick teak wood beading polished alround along with sliding telescopic channel and complete arrangements for fixing them in table computer as directed by Engr-in-charge.

Mouse tray with 4mm thick teak wood beading polished alround along with sliding telescopic channel as directed by Engr-in-charge.

Bottom shelf made of 18mm thick prelaminated MDF board of exterior grade with 4mm thick teak wood beading alround as directed by Engr-in-charge.

New vertical shelf made of 18mm thick prelaminated MDF board of exterior grade with 4mm thick teak wood beading polished alround as directed by Engr-in-charge.

New sides of 150mm width made of 18mm thick prelaminated MDF board of exterior grade with 4mm thick teak wood beading polished alround as shown in drg or as directed by Engr-in-charge.

New shelf made of 18mm thick prelaminated MDF board of exterior grade with 4mm thick teak wood beading polished alround as shown in drg or as directed by Engr-in-charge.

M & L for scratching the entire steel frame of table with sand emery paper and applying one coat of synthetic enamel paint of existing colour after preparation of surfaces. Complete all as specified and as directed by Engr-in-charge.

Legs with nylon buffer as shown in drg or as directed by Engr-in-charge.

25mm x 50mm Rect PVC cover made to shape as shown in drg or as directed by Engr-in-charge.

Top made of 18mm thick prelaminated MDF board of exterior grade with 4mm thick teak wood beading polished alround as shown in drg or as directed by Engr-in-charge.

CHAIR TIP UP 750mm with moulded polythene foam for seat & back (Sample of chair can be seen in site before quoting rates) , Drg No. TP

MS steel spring of seat fitted in iron bar of seat, as to smooth functioning as in original to chair, with all other allied works and re-fixing the same as directed by Engr-in-charge.

M&L for spot gas welding to the broken parts/joints of MS Frame, Base plate etc as required to make in serviceable condition complete all as specified & directed.

M&L for removing old unserviceable Upholstry of Tapestry cloth of seat, back & sides of chair tip up moulded polythene foam of size 750mm. S&F new tapestry cloth of high quality to upholstry the chair tip up moulded polythene foam seat, back & sides covering all seat and back as in original shown on drgs or as directed by Engr-In- Charge. Colour of cloth as approved by GE. Tapestry cloth should not be less than Rs 260/-Mtr.

Removing of unserviceable PU arm rest of chair Tipup and S & F new PU arm rest of chair Tipup with suitable bolts and nuts complete all as per specified & directed.

Removing of unserviceable MS anchor bolt at the base plate fixed to the foundation and S & F new MS Anchor bolt at the base plate for fixing the chairs to the foundation rigidly with suitable nuts, washer, chemical injection/ grouting complete wherever required upto the satisfaction, as specified & directed by Engr-in-charge.

CHAIR SCHOOL WITH HAND BOARD (Drg No. FD/E6/MAP/05 )

M & L for scratching the entire frame of chair with sand emery paper and applying one coat of synthetic enamel paint of existing colour after preparation of surfaces. complete all as specified and as directed by Engr-in-Charge.

S & F one piece PVC seat and back and fixing the same by providing four screws as described in drg. (Make- Blow plast/ Nilkamal/ supreme) after removing the old UNSV of the same.

S & F new 25mm dia hollow steel pipe along with hinges arrangement complete on RHS for supporting the openable hard board inserted in 20mm dia MS rod welded to frame complete as described in drg after removing the old unserviceable one all as specified and directed.

S & F 18mm thick prelaminated MDF board exterior grade top openable/hand board with 4mm thick teak wood edging alround as described in drg after removing the old UNSV of the same.

S & F Hard rubber shoes after removing old unserviceable shoes as per drg.

Chair Verandah (Drg No. FD/MAP-II/06 )

Removing the existing unserviceable/ broken PVC seat and back from the chair and S & F new PVC seat and back 4mm thick to the chair verandah MAP after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT – AMKO/ COMFO/ HARMONY

M & L for scratching the entire frame of chair with sand emery paper and applying one coat of synthetic enamel paint of existing colour after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge.

M/s Green Leaf Electricals

Mahesh Traders

SARGAM ENTERPRISES

M/s Mitesh Agencies