REPAIRS TO ROOF, JOINERY,PLUMBING,FLOORING AND OTHER CONNECTED WORKS AT ADM AND GE COMPLEX IN RA AREA AT CAD PULGAON

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof overingscomplete all as specified

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Pre-painted galvalume aluminium zinc coating GI based Crimbed corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified

Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if type 3 or any all as per direction by Engr In Charge.

S&F structural steel work conforming to Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified.

Supply & Fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed by EIC.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed by EIC.

M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for Preparation of wood or wood based new or untreated Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthatic enamel paint over a coat of pink primer.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

Material and labour for false ceiling with GI based powder coated steel snap grid frame work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with hangers 4mm dia GI wire adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long or hooked to roof with needful adjustement bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 8/9 mm thick fixed to steel frame work complete all as specified and directed by Engineer-in-Charge.

M&L for PVC insulation panels 10mm thick with EPS stuck to 1mm printed PVC sheet suitably placed and including in grid for wall panalling/false ceiling made of Aluminium/G.I./M.S. as approved by GE incl hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

Providing and fixing 10mm thick plaster of paris (POP) ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)

S&F in repairs Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level.

M&L for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection , finished fair and even, without using extra cement.complete

M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases/floors/pavings etc complete all as specified and as directed.

M&L for Chequred cement concrete coloured tiles with glozy finish painted surface size 300 mm x 300 m x 22-25 mm thick laid over and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as item No (15) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified.

M&L joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as item No (15) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified.

M&L ceramic coloured matt finish tiles 7 to 8 mm thick ( square/rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed .

M&L glazed coloured ceramic tiles 600 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed .

S&F in repairs sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs washers and wastes including waste pipe fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm complete all as directed. ( Make Nirali /Prayag/Blue star/Silver Shine)

S & F machine cut cudappah stone slab 20 to 25mm thick polished one side for kitchen platform over cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing complete all as specified and as directed.

M&L for Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 20mm screed bed CM 1:6. incl demolition complete all as specified and as directed.

Demolition of brick /stone masonary built in cement mortar including all quoins arches, pillars and precast concrete articles all as specified and as directed.

M and L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M and L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

Providing precast cement concrete louvres and jallies, 38mm thick (measured solid), in cluding all mouldings but excluding frame

Taking down of chowkhats or frames not exc 1.5 sqm each (with out taking off shutters from the frame) complete.

Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, fixed in frame at site as per specification & drawing

M&L for second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed

Supply & Fixing 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed by EIC.

Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated without sash bar as in doors, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified & directed by EIC.

Supply & Fixing 30 mm thick factory made glazed skeleton window shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified & directed by EIC.

S&F for Toughened glass 12mm thick frameless door & fixed with statinless steel handle 250mm long, SS hinges and corner SS cleats, piots, mortice lock, plain/frosted glass as per site requirement complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed.

Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC.

Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC.

Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC.

Supply & Fixing 100mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC.

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

Supply & Fixing 125 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

S& F in repairs Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified.

S& F 3.50 mm thick sheet figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply & fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S&F in repairs 20mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs stainless steel curtain rod 25mm including brackets fancy type 02 Nos each rod with fixing brackets, stops, rollers etc

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Exc 500 & n exc 1000 Ltr.

S&Fin repairs rotational moulded polythylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge

S & Fixed in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 210 gms,complete all as specified and directed by Engineer-in-Charge

S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge.

S&F (in repairs) vitreous china squatting pan 'orissa pattern' size 580 x 450 mm white with integral foot rest (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed.

S&F (in repairs) vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified. (Make : Hindware/Cera as approved by GE).

S&F in repairs PTMT gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge

S&F in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including 15 mm dia bore fancy type pillar tap , waste coupling, brackets, PVC waste pipe of 32mm, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous China wash hand basin oval type under counter of Size: 605x430x200 mm white including 15 mm dia bore fancy type pillar tap ,waste coupling 40mm, including cutting for and pinning in ends of brackets or fixed with bottle traps complete all as specified and as directed.

S&F in repair Vitreous China bowl urinal flat back, size 430 x 370 x 340 mm (minimum) white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) and including urinal spreader CP fancy type fixed with long screws, rahul plug etc complete all as specified and directed.

S&F in repairs Brass chromium plated bottle traps 40mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F in repair stop/angle valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed.

S&F in reapirs, 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 150mm size fixed to 15mm bore pipe all as directed.

S&F repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge

S&F in repairs for Towel Rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed.

S&F in repairs CP towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed.

S&F in repairs Bib tap fancy type long body cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed.

S& F in repair for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F in repairs Particle board 18/19mm, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified & directed.

S&F for cup board/cabinet hinges full overlay or half overlay type fixed with stainless steel screws complete all as specified and directd

Taking down cement plaster/terrazzo finish on wall of any description hacking for key scrubbing down with water including racking out joints.

M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement.

M&L for preparing surface of wall priming plastered and other surfaces with one coat wall care putty priming paint over two coats of Oil bond Distermper complete all as specified.

M&L for preparing surface of wall priming plastered and other surfaces with white cement priming paint over two coat of cement base paint complete all as specified.

M&L Complete removal of existing treatment on old surfaces on walls and applying two coats of distermpering on walls with distemper oil emulsion over a one coat of wall care putty complete all as specified

M & L Complete removal of existing treatment on old surfaces on walls two cement base paint over a coat of white cement primer including preparation of old surfaces complete all as specified and directed vy Engr in Charge.

Cleaning of 100 mm bore sewage line and connected Manholes any length from WC to Manhole, manhole to manhole, manhole to septic tank septic tank to soakwell by roding and well flushing after cleaning and removing mud etc to in pits complete all as specified and directed by Engr-in-Charge.

All as per Item No. 85 above but for 150 mm bore dia of pipes

M/S.Chourasia Construction Company (BID ID -3253598)

M/s Prakash Agencies (BID ID -3253684)

MAHARASHTRA ENTERPRISES (BID ID -3253352)

M/s MM TRADERS (BID ID -3252647)

M/s VILAS RATAN MENDHE (BID ID -3253857)

M/s Dara Constructions, Pulgaon (BID ID -3253296)

GUNJANSINGH VIJAYSINGH CHAUHAN (BID ID -3253818)

Bidder Name

M/S.Chourasia Construction Company

M/s VILAS RATAN MENDHE

MAHARASHTRA ENTERPRISES

M/s Dara Constructions, Pulgaon

M/s Prakash Agencies

M/s MM TRADERS

SHRIKANT CONSTRUCTION

GUNJANSINGH VIJAYSINGH CHAUHAN