REPAIRS TO WOODEN WPC PVC JOINERY COLLAPSABLE GATE ROLLING SHUTTERS GLASS DOORS AT CERTAIN OTM BLDGS UNDER AGE BR I AT INS SHIVAJI LONAVLA

Amount

Repairs to shutters of any description n exc 2 Sqm each in including taking down, easing and adjusting and fixing in same opening including renewing all builders hardware (hinges, handles, sliding bolt, tower bolts and door stopper with screws) etc all as directed by Engineer-in-Charge.

S&F in repairs for 4 mm Sheet glass, ordinary quality and glazing as in Aluminiu windows, Doors, Ventilators etc in square/ rectangular shape n exc 0.5 sq.m in each pane including taking out and removal of old glass all as directed by Engineer-in-Charge.

S&F in repairs for 5 mm Sheet glass, ordinary quality and glazing as in Aluminiu windows, Doors, Ventilators etc in square/ rectangular shape exc 0.5 sq.m in each pane including taking out and removal of old glass all as directed by Engineer-in-Charge.

S&F in Repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.0 mm and fixed to wooden skeleton shutter/ Aluminium windows all as directed by Engineer-in-Charge.

Preparing Old wooden surface and applying One coat of synthetic enamel paint.

Taking down chowkats with shutters( without taking off shutters from the frame) exc1.5 sqm and n.exc 4 sqm each

Taking down chowkats or frames N.exc 1.5 Sqcm with shutter (without taking of shutter from the frame.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick CM 1:6 on fair faces of brick work or concrete surfaces and to be finished even and smooth(without using extra lime or cement)

M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over 3 mm thk wall care putty

S & F 2nd class Hard Wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in position including Treating back surfaces with ready mixed paint, matt black and 6 Nos of hold fasts of 150 mm long made of MS Flat 25x5mm.

S&F 2nd class Hardwood of 30mm thk Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats

S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats.

S&F 30 mm thick Flush Shutters, Solid core construction, with particle board core and both faces are covered with decoraative face veneer with lipping / frame to match

S&F galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples.

Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing including 100 mm long 8 Nos Hold fast/ Screws.

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

M&L for Factory Made 24mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cum an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 50 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing with 3 nos stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in 125 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed

S&F 100 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed

S&F Aluminium bow handles, cast type, anodised 150 mm long

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size65x 125 mm double rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter single/ double leaf of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with 3 nos stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge.

S&F factory made single extruded WPC (Wood Polymer Composite) 30mm thick wire mesh solid decorative flush door shuter consisting of Density 500 Kg/Cum manufactured by an ISO certified company, door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strngth and safety purpose (conforming as per IS 4020).The door should be water proof,termite proof, fire retardant and having screw holding capacity.Door to be fixed to frame 3 nos Stainless steel butt hinges size 100mmx25 mmx2mm (in each leafs) and 32 mm long steel screws drilled suitable to pass through both the walls of the MS tube. Other hardwares should be fixed with 19x6mm size steel screws etc all as per direction of Engineer- In- Charge.

Taking down steel/aluminium windows/ventilator of any size with all fittings complete

Supply and fix aluminium powder coated fixed type ventilator without sash bar, centre to centre distance of horizontal members not exc 60 cm & vertical members not exc 45 cm with 4 mm thick plain sheet glass,rubber packing with & including following powder coated section as given in 'JINDAL' catalouge complete all as specified and as directed by Engineer-in-Charge (i) Frame (SP) -20052 (ii) Frame (DP) - 20051 (iii) Glazing clip - 19352

S&F aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed by Engineer-in-Charge. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (ii) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

S&F in repairs Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

S&F in repairs 1 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; gear operated type with bevel gear box and crank handle

Repairs to Steel rolling shutters, any type n. exc 10 Sqm as specified including repair replacement of top cover, anchoring rod, greasing, hasp and staple and making operational by manual including hasp and staple and applying two coat of synthetic enamal paint; erected in position as indicated, complete

Repairs to Steel rolling shutters, any type exc 10 Sqm as specified including repair replacement of top cover, anchoring rod, greasing, hasp and staple and making operational by manual or electric including applying two coat of synthetic enamal/aluminium paint; erected in position as indicated, complete

S&F 12 mm thick frosted toughned glass shutter of any size fixed with all necessary patch fitting at all corner, with top and bottom pivot, locking arrangement and ball catcher including embosing/ itching of any figure or logo all as directed by Engineer-in-Charge.

Repairs to aluminium doors of any size including taking down and fixing with necessary fittings of rubber, neoprene gaskets, loacking arrangements, corner tee, handles, hinges, glass and mdf bords etc including securing in same opening and filling up the gaps at junctions, i.e. at top, bottom and sides all as directed by Engineer-in-Charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates,hold fast rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F Aluminium (Extruded section body) Door closer hydrau?lically regulated, designation No. 3, universal type, suitable for door shutters up to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs.

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination & other side balancing white lamination as in cabinet doors, shelves fixed with screws, hinges,magnetic catcher, handles to timber frame work

S&F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination & other side balancing white lamination as in cabinet doors, shelves fixed with screws, hinges,magnetic catcher, handles to timber frame work

M&L for 2nd class hardwood plain fillets of cross sectional area exc 13 sqcm & n exc 25 Sqcm. square, rectangular or triangular in section, clean sawn, secured with nails or brads.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats

S&F in repair floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

Peerzada And Sons (BID ID -3366066)

industrial suppliers (BID ID -3361108)

United Engineers and Contractors (BID ID -3375782)

M/s S.D Construction Co (BID ID -3367752)