PROVISION OF SYNTHETIC BADMINTON COURT AND PROVISION OF CHAIN LINK FENCING NEAR MAIN GATE AT DIGLIPUR

Amount

Excavating over areas, not exceeding 1.5 mtr deep and getting out in any type of soil complete all as specified.

Removing excavated soil material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

Rolling and consolidating formation surfaces in cutting including watering as necessary filling in the depressions with approved earth which occur during the process with 8 to 12 tonne power roller consolidating to required gradient and camber all as specified.

M&L for 150 mm spread thickness soling (or sub base) with broken boulders or quarried stones, interstices filled, surface formed and rolled and consolidated with 8 to 10 tonne power roller to required gradient and camber all as specified.

M&L for 150 mm thick (compacted thickness) WBM, in two layers of 75 mm thickness each with granite coarse aggregates of grading 2 (63 to 40mm size), spread, rolled and consolidated with 8 to 10 tonne power roller to gradient and camber required.

M&L for 75 mm thick PCC Type D2, 1:4:8 (using 40 mm graded crushed granite stone aggregate) laid in sub-floors, sub-bases, floors and pavings, etc., finishing concrete surfaces even and rough complete all as specified.

M&L 100 mm thick PCC Type B1, 1:2:4 (using 20 mm graded crushed granite stone aggregate) as in floor, finishing concrete surface even and fair (without using extra cement) to receive synthetic resin surface layers complete all as specified.

Excavating in post holes (or similar holes) each not exceeding 0.5 cu. m, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface.

M&L for PCC Type B2, 1:2:4 (using 40mm graded granite stone aggregate) as in foundations, filling and mass concrete.

S&F mild steel tube 100 mm internal dia. medium grade as in post including MS cap, pulley and rings welded to post to hold net as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L for painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exceeding 10cm wide with road marking paint, white or golden yellow as applicable to badminton ground complete all as specified and directed.

S&F nylon net for badminton court as per international standards all as specified and directed.

M&L for PCC Type B1, 1:2:4 (using 20 mm graded crushed granite stone aggregate) as in in surface channels and drains complete all as specified.

M&L for provision of synthetic resin surface on concrete surface of thickness 4 mm, 8 layers (3 layers of synthetic cusion and 5 layers of synthetic coat) of approved colour for synthetic badminton court complete all as specified and as directed. Notes: (i) The work shall be carried out in the presence of company representative & by authorised applicator of company as per international standards. (ii) Approved make, catalogue and detailed specifications shall be submitted by contractor before start the work. (iii) All materials and design shall be submitted by contractor before start the work. Name of company: Costa Sports Systems Pvt Ltd / Sports Field Safe Products India Pvt Ltd / Sunflex Sports Infrastructure Pvt Ltd / Purple Seas Sports Technology

M&L for PCC Type C2, 1:3:6 (using 40mm graded granite stone aggregate) as in foundations, filling and mass concrete.

S&F mild steel bolts of length not exceeding 15 cm and diameter of neck 12 mm, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut.

S&F mild steel angles and flats for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

S&F 10 mm dia mild steel round bars and cut to length, bend to shape fixing in flat angles with bolt conforming to Fe-410-W (Gde.E-250) quality-A.

M&L for preparation of new or previously untreated steel surfaces of any description, not exceeding 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

S&F 1 mm thick PVC coated chain link fencing wire mesh of size 75 mm x 75 mm, made of 4 mm dia MS galvanised wire, to any type of standards, rails, straining bolts, etc including provision of GI wire binding complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/ loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose soil.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm

M&L pulverised sand to fill width of trenches for protection of cables including spreading and punning down including watering consolidation complete all as specified. Note: Thickness of sand cushion after punning down i.e 18 cm shall be measured for payment.

S&F rectangular 250 Watts LED flood light fitting made up of pressure die-cast aluminium housing with toughened glass and high power LEDs with innovative thermal management and available with multiple optics and equipped with IP66 protection and better uniformity complete all as specified and directed. Make: Crompton Cat No. LSFO-250-CDL/60-M or equivalent in Bajaj / Havells.

S&F 40 mm bore light grade GI pipe bracket 0.90 mtr long bend to shape drilled welded for fixing of street light fitting of any type and description including clamps, nuts, bolts and washers complete all as specified and directed.

S&F Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-55 (11 metres long) complete all as specified and directed. Make: Crompton / Bajaj / Philips Note: Necessary Earth work and PCC shall be measured and paid separately.

S&F LT junction box for LED flood light fitting, sheet moulding compound (SMC) type with hinged type door and locking arrangement, off-white colour of size 140x140x105 mm (internal) of make Sintex comprising 10 Amps MCB - 01 No. bakelite base neutral link and 01 No. earthing terminal bolt, nut and connecting up cables with aluminium terminal lugs including fixing arrangements all as specified and as directed.

M&L for submain wiring with 2 runs of 4 Sqmm single core FRLS PVC insulated, unsheathed, multi stranded copper conductor and one single core 4 Sqmm FRLS PVC insulated , unsheathed , multi stranded copper cable as earthing lead as per IS : 694 / 1990 drawn through and including PVC casing caping of size as ordered on walls / ceilings etc complete all as specified and directed. (Note:- 2 runs 4 Sqmm cable, one run 4 Sqmm cable and one run of PVC casing caping shall be measured as one unit length) .

S&F 40 mm dia bore GI pipe light grade with necessary fittings in trench / floor / pillar / fixed on pole etc for cable protection complete.

Supply, lay and testing XLPE insulated, cores laid up, PVC innersheated, armoured with glavanised wire, heavy duty LT UG electric cable with solid aluminium conductor, 1100 Volts grade, extruded PVC Type ST2 sheathed, conforming to IS: 7098 (Part I) 1988 of cross- sectional area 2 core 10 sqmm.

S.K.ENTERPRISES

DAS AND SONS CONSTRUCTION