Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 LAccepted-AOC | L1 | Accepted-AOC lOWEST | |
| 2 | L2₹11.7 L+₹2.8 L (31.6%)Rejected-AOC | L2 | Rejected-AOC HIGHEST |
Tender Value
₹9 L
EMD Value
₹9,000
Closing Date
28 Aug 2018, 12:00 pmClosed
SE EDC Mathura
Near Kali Mandir, Mathura Cantt, Mathura
Proposed work for Laying of Earth Wire in LT Line for installation of meter at various villages in jurisdiction of E.D.D.-Mant, Mathura
2018_DVVNL_236459_2
76/EDC(M)/2017-18
Open Tender
Electrical Works
Item Rate
180 days
Mathura
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,062
DVVNL Agra
₹9,000
Yes
26 Jun 2020
12 Aug 2018
28 Aug 2018
12 Aug 2018
28 Aug 2018
12 Aug 2018
Amount
Carriage of 8.5 Mtr Long PCC Pole from 132 KV Store Center Mathura to dump site through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70 Kms.)
Carriage of Line material i.e. ACSR Weasel conductor, and other required material from Store Center at 132 KV substation Mathura to the site of work including loading and unloading of material at both ends. (App. Distance 0-60 Km.)
Erection of single pole structure 8.5 Mtrs on PCC Pole by digging of pits fitting of all relevant accessories as per RESPO norms.
Laying, sagging stringing and binding of ACSR Weasel Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.
Removal of Damaged G.I. Wire/ACSR Weasel existing conductor from Pole including opening of jumpers etc and its binding, stagging and carriage to J.E. Store/Store Center mathura as per requirement of site and as per direction of Supervising Engineer. App. Distance 0-60 Km.
Re-sagging of loose L.T line as per direction of supervising engineer. It includes the cost of labour, T&P etc required for proper completion of work.(work will be done inside and outside of village)
Providing of L. T. Pin Clamp for 8.5 Mtr. Long PCC Pole. The clamp shall be fabricated out of tested quality M.S. flat of size 50mmX6mm by forging mild steel used for the clamp shall confirm to the ISS 226:1975. the clamp shall have the free from cracks, welding, joints and burrs. Each L. T. clamp shall be provided with 2 holes of 18mm dia, to accommodate the bolts of 16 mm. size. The clamp shall be painted with one coat red oxide primer confirming to ISS 5660: 1970 or latest revision thereof. The clamp shall be complete with 2 Nos. bolt & nut of size 65 X16 mm. dia full threaded, as per RESPO Drawing.
Providing of L. T. Shackle Insulator size 100 x 116 mm. as per standard specification with bolt, nut and washers.
Fixing of L.T. Pin Clamp on 8.5 Mtrs. PCC Pole.
Fixing of L.T. Shackle Insulator on 8.5 Mtrs. PCC Pole.
Installation of stay set with grouting and nuzzling etc. as per RESPO drawing along with all routine material to be used for such works.
Re-nuzzling of old stay set by opening old binding for better straightening of pole and re-sag the existing conductor of H.T/L.T line properly as per direction of supervising engineer.
Straightening of 11 KV Line tilted pole structure on 8.5 Mtr. Long PCC Pole at various places by straightening of pole including the cost of labour ,T&P charges required for proper completion of work (inside/outside village)
Removal/Re-fixing of consumer’s cable service connection from existing line feeding consumer supply.
Mithila Tea Company
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .