Augmentation of Solid Waste Management Treatment Plant at Sarbal Pahalgam.

Amount

Conveyor Table (8m x 900mm) Table Type MS Fabricated Conveyor Table with side platforms Function: Transports waste to sorting stations. Width: 900mm Length: 8 m Speed: 0.2 m/s Motor: 5 HP gear motor Material: Rubber Conveyor Belts with SS304 slats with side guards. Adjustable height (0.8-1.2m) Frame Material: Hot-dip galvanized steel for corrosion resistance. Drive Mechanism: Mechanized Gear motor, 3-phase, 5 HP. Enclosed gear box with overload protection & Emergency stop switches along the side platforms. The job also includes foundation of suitable size as per Equipment requirements and cable from Main Control Panel to the Equipment.

Sorting Stations & Equipment. a.Sorting Bins (HDPE) - Capacity: 200Litre each Qty: 08 bins For (Plastic/Paper/Metal/Glass/Inert/Organics) b. Magnetic Separator : Permanent magnet (for ferrous metals) - Mounted on conveyor. c. Safety Kits : Gloves, masks, aprons (for 10 workers)

Mechanical Screw Feeder cum dewatering machine with Hopper. Supply of Screw Conveyor System (1000 kg/hr), made of SS304. Hopper Size: 1.0m x 1.2m (L x W) Screw Diameter: 300–400 mm (Helical Auger) Motor: 5 HP, 3-phase, TEFC, Starter (DOL/Star-Delta), MCB, overload relay, emergency stop, power/control cabling from Main Panel. Discharge Height: Adjustable (to match shredder inlet) The job also includes foundation of suitable size as per Equipment requirements and cable from Main Control Panel to the Equipment. Construction of 5000 Litre RCC Sump near hopper (approx. 2 m x 1.5 m x 1.7 m) with cover near hopper Connected to leachate tank.The Job also includes dewatering pump , pipes and fittings to the nearest drain point

Double Shaft Shredder Machine. Organic Waste Shredder Supplying, installing, testing and commissioning of Organic Waste Shredder of capacity 500-600 Kg/hr, complete with 3-phase TEFC motor of 20 HP with overload protection, operating at 1440 RPM through reduction gearbox.The unit shall be have auto-Reverse Function to reduce jamming The unit shall be equipped with minimum 32 nos. EN31 hard chrome plated blades mounted on 50 mm hexagonal shaft. The shredder shall have a reinforced hopper of minimum throat size 500 mm x 500 mm or as per OEM recomendations, with manual or motorized pusher or feeder roller for feeding melon-sized organic waste. The unit shall also have Belt Guard for gearbox safety. The machine shall handle Garden Leaves /Small stems, ,Coconut wastes,all vegetables and fruit wastes. The Job includes construction of foundation suitable for mounting, laying of power cable from Main Control Panel to the equipment, testing, commissioning and demonstration at site as per direction of Engineer-in-Charge

5 TPD Semi Automatic PLC based type Organic Waste Composter. Semi Automatic Type suitable for 5000 kg/day processing capability of organic waste with batch time of 10-12 days for first batch or per OEM requirements/standards. Items treatable : All type of Fruits, Fruit peels, all kinds of Vegetables, Vegetable peels, Fish, Fish bones, Chicken bones, Bread, curries, garden waste, leaves. Compost output: 1000–1200 Kg/day; Compost Tank Material : SS304 Digester Volume: Suitable capacity; Dimensions:As per OEM recomendation. Power Supply: 3 Phase, Connected Load: Minimum 15 kW (approx. 20 HP) or as per OEM recomendations. Includes Automatic based PLC type control panel, Centrifugal blower, internal mixers. The job also includes foundation of suitable size as per Equipment requirements and cable from Main Control Panel to the Equipment.

Belt Conveyors for Bio - Composting Process. SITC of Belt Conveyor installed between Primary Shredder machine & Dewatering Unit of size 600mm belt x 30 feet length or as per actual site conditions / OEM standards and other Belt Conveyor Installed between Dewatering Unit & OWC Tank with dimensions of 800mm belt x 30 feet length or as per actual site conditions / OEM standards with technical specifications as under; Belt type & thickness: Belt- 8 mm thickness x 3 ply or as per OEM requirements/standards. Structure :100x50 channel or as per site requirements. Rollers :Carrying idler roller with Bracket @ 1250mm distance or as per OEM requirements/standards. Return roller @ 2500mm distance or as per OEM requirements/standards

Vibrating Screen with Support Stand. Capacity : 500 kgs Per Hour Screen Mesh Size:6mm or 8mm Deck Type :Single/Double Deck (as per requirement) Material Handling: MSW, Compost, Aggregates, Recyclables. Screen Material Stainless Steel :(SS 304/316 for corrosion resistance) Frame Material:Mild Steel (MS) with anti-rust coating (epoxy/powder-coated) Structure Height : 1.5m (adjustable legs). Inclination Angle : 15°–25° (adjustable for efficiency) Motor Type: 5 HP, 3-Phase, TEFC (Totally Enclosed Fan Cooled) Power Supply: 415V, 50Hz (Standard Indian supply) Vibration Frequency:900–1,500 RPM (adjustable eccentric weights) The machine shall have emergency stop button, guard covers over moving parts. The job also includes foundation of suitable size as per Equipment requirements and cable from Main Control Panel to the Equipment.

Exhaust Fans. Type Axial Flow Fan (Wall/Roof-mounted) Airflow Capacity : 5,000 CFM Static Pressure :50–150 Pa (0.2–0.6 inch WG) Blade Diameter :600–900 mm (24–36 inches) Motor Power : 1.5 HP - 2 HP Speed (RPM) : 800–1,400 RPM Voltage: 415V, 3-Phase, 50Hz (Standard for India) Material Housing: Galvanized Steel (GI) / Aluminum Blades: Aluminum/FRP (Corrosion-resistant) Protection Class : IP55 (Dust & Waterproof) Vibration pads may be required for noise reduction. Design Standards & Certifications IS 3103: Industrial Ventilation Fans IS/IEC 60034: Motor Efficiency Standards The job also includes foundation of suitable size as per Equipment requirements and cable from Main Control Panel to the Equipment.

Baling Machine. Main Force Cylinder : 25 Ton Chamber Size : H” x W”x L” : 700 x 500 x1400 inch Bale Size : 700 x500” W” x L” Inch Production rate : 15 to 20 Minute 90(Shafting)**800(Stroke)1000 Oil Tank Capacity:60 Litres without Oil Working Pressure : 2000 PSI Electrical Motor :5 HP Motor 3 Phase 1440 RPM 50Hz Fabricated Body : 6 mm Items Handled : Waste Paper, Pet Bottle Waste Plastic, Plastic bag, Cardboard, Cement bags, Garbage Waste, HPDE & PP Waste, Waste Foil, Light metal scrap. The job also includes foundation of suitable size as per Equipment requirements and cable from Main Control Panel to the Equipment.

Fully Automatic Plastic Shredder Machine 5 TPD. Shredder Machine 5 TPD Motor Power : 20 HP Length of Shaft In mm : 500mm Blade Type : Hardened Steel (EN-31 Movable & Fixed Blades) Chamber wall thickness : Minimum 12 mm or as per OEM recomendations. Cutting Mechanism : Double Shaft / Single Shaft with Hydraulic Pusher. Cooling System : Water-cooled / Air-cooled. Output Size : 5–20 mm (customizable) Inside Dimension of Shredder Chamber : 600*600mm Material Of Shaft : Stainlesss Steel Diameter Of Shaft : 45mm Motor Power In @ RPM 1440 : 20 HP Gear 1 nos Capacity Of Machine : 5 Ton Per Day The job also includes foundation of suitable size as per Equipment requirements and cable from Main Control Panel to the Equipment.

Solid Waste Incinerator. Handling Capacity 500 kg/day. Type: Electrically opearted Items Handled : Municipal Solid Waste and Bio-Medical waste. Chamber Type Dual Chamber (Primary + Secondary) Primary Chamber Volume of miniumu 400–500 liters or as per OEM recomendations Secondary Chamber Volume minimum 300–400 liters or as per OEM recomendations. Construction Mild Steel with ceramic insulation and refractory lining (1150°C – 1400°C) Temperature Range Primary: 800–850°C Secondary: 1000–1100°C Burning Rate -30–40 kg/hr Chimney Height Minimum 30 meters / as per latest CPCB norms, MS with corrosion-resistant coating Power rating : 15 kW or as per OEM recomendations. Power Supply 3 Phase. Control Panel Auto temp controller, timer, safety cut-off Ash Residue 2–5% of input weight Emission Control Optional wet scrubber or dry filter unit Compliance CPCB norms for Biomedical / Municiplity waste incineration.The Item shall be Pollution Control Device & Monitoring System also as per CPCB norms. The job also includes foundation of suitable size as per Equipment requirements and cable from Main Control Panel to the Equipment.

Cable, Cable trays and Conduits. a) P/F of electrical cables from main control panel to outdoor units as per sizes given. 3.5 Core x 150 Sq mm Al Cable

Cable, Cable trays and Conduits. b) P/F of electrical cables from main control panel to outdoor units as per sizes given. 3.5 Core x 16 Sq mm Cu Cable

Cable, Cable trays and Conduits. c) P/F of electrical cables from main control panel to outdoor units as per sizes given. 3.5 Core x 6 Sq mm Cu Cable

300mm width x 50mm depth x 2mm thick perforted M.S. cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S suspenders and including painting etc. as reqd.

Supplying and Fixing of 25 mm dia PVC Conduit along with Accessories in surface/Recess including painting in case of surface conduit,cutting the wall and making good the same in case of recessed conduit as required.

Providing earthing station with Cu Earthing Plate (600mm x 600mm) 8 mm thick for pumps and MCC panels including excavation, CI manhole cover and frame complete as per specifications and IE rules.

DG Set and allied works- 100 KVA. Supply, Installation and testing and commissioning of 100 KVA silent type Diesel Generator (as per CPCB 4 plus norms) set with AMF panel (inbuilt or separate). - Diesel Engine: Water cooled, electric start of suitable BHP required for 100 KVA output of alternator at ambient temperature, radiator cooled and conforming to latest CPCB 4 norms with an optimized turbocharger. - Instrument panel having a digital display for water/coolant temperature indication, oil pressure indication, battery volt/ charging indication, engine speed-RPM/ over speed indication, engine hours indication and having start stop switch / button. - Alternator: alternator rated at 100 KVA, 415 V at 1500 rpm suitable for 50 Hz 3 phase system, AC supply with 0.8 lagging power factor. The alternator shall be screen protected, brushless type, continuous duty and suitable for tropical conditions. - Starting system: DC starting system comprising of starter motor with suitable 12V SMF battery. The battery shall be installed using battery cables and thimbles/terminators. - AMF panel: totally enclosed dust, damp, vermin proof front operated AMF Panel having microprocessor based AMF control unit along with circuit breakers/contractors- 02 nos. one for main and other for DG set suitable for 100 KVA. - LED indicating lamps for on/off operation, acoustic enclosure,anti-vibration / AVM pads and earthing of complete system with GI electrodes and chemical as per standards properly fitted with earthing strip/wire. - Complete installation with laying of foundation block as per CPWD norms, providing & filling of one full tank load of fuel, thereafter Testing and commissioning of the DG Set at no load and thereafter at full load at site.

ZOON ENGINEERING TRADERS (BID ID -2583304)

Maxim Mechatronics Limited (BID ID -2571434)