REPAIRS TO JOINERY, ROOF TREATMENT, FLOOR TILES, SUNKEN TREATMENT, SANITARY FITTINGS, TANK CLEANING, PLUMBING WORKS AND OTHER ALLIED WORKS TO BLDGS AT VIMAN NAGAR AND CHANDAN NAGAR FOR SMQS AND OTMS, TECH AREA SOUTHERN PART OF RUNWAY AND DOMESTIC ARE

Amount

Taking down existing water proofing treatment by Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, scrubbing down with water etc. complete all as specified and directed.

Demolition of cement concrete of any description in any position not otherwise specifically provided for complete all as specified and directed.

Roughening surfaces of old concrete floors/slabs by picking, sweeping, cleaning and washing down with water to remove dust, brushing neat cement slurry with 3.0Kg of cement per sqm complete all as specified and directed.

Cutting or uprooting grass / scrub on old roof surfaces, removing rubbish off the premises, cleaning surface and preparing to receive new cement plaster complete all as specified and directed.

M & L for cutting grooves in brick wall 75 mm wide and 65 mm deep tucking in edges of felt and shaping horizontal face of grooves with CM (1:3) complete all as specified and directed.

M & L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed.

M & L for providing PCC 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) as in padding concrete for getting proper slope of roof / covering etc as complete all as specified and directed.

M & L for rendering 10 mm thick average in cement mortar (1:4) over roof surfaces mixed with WPC as per manufacturer’s instructions, finished fair without using extra cement complete all as specified and directed. (NOTE: WPC shall be measured and paid separately)

Preparation of surface and applying two coats of hot bitumen blown VG-30 to concrete surfaces at the rate of 1.2 kg. per sq. m per coat complete all as specified & directed.

M & L for roof treatment using APP based polymeric membrane, minimum weighing 3 kg / sqm and minimum 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with side over lap 75 mm and end lap minimum 100 mm and sealing over lap and joints as per manufacturer's instructions complete all as specified and directed.

M & L for one coat of aluminium paint 0.30 ltr / sqm above the APP membrane complete all as specified and directed.

Supply only liquid water proofing compound as per manfacture instruction complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to store complete all as specified and directed. (measured overall as fixed along the centre line over fittings and accessories)

S & F for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F for 110 mm PVC (SWR) bends any radius complete all as specified and directed.

S & F for 110 mm PVC (SWR) junction single, (Single T) with access door equal or unequal complete all as specified and directed.

Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F 0.50 mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated steel colour sheet having tensile strength of 550 Mpa as in roof covering with self tapping screws complete all as specified and directed.

S & F 0.50 mm thick Pre- painted galvalume aluminum zinc coating GI based plain colour sheet having tensile strength of 550 Mpa as in roof covering with self tapping screws complete all as specified and directed.

S & F 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc complete all as specified and directed.

M & L for asbestos cement two piece adjustable plain wing ridge 6 mm thick fixed with L or J type or cranked hook bolts complete all as specified and directed.

Disconnecting existing exc 250 nexc 500 Ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc removing scale and durt from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Disconnecting existing 1000 Ltr tanks, setting aside (or lowering if required) from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Dismantling water tanks of any type of capacity exc 250 but n.exc 500 liters and removing to store complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

Dismantling water tanks of any type of capacity exc 500 liters but n. exc 1000 ltrs and removing to store complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

S & F of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe complete all as specified and directed.

S & F of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 15 mm bore pipe complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F GI pipe medium grade 15 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F GI pipe medium grade 20 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing and connections ,galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm bore in new or old position complete all as specified and directed.

Refixing old steel tubing and connections ,galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm bore in new or old position complete all as specified and directed.

Removal of air lock/blockage of water in GI tubing 15/20mm bore of any type incl taking down (if reqd), cleaning the pipe or fitting etc and refixing the same in position complete all as specified and as directed

Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 on brick or concrete surfaces finished even and smooth with integral water proofing compound (IWPC Measured and paid seperately) on wall complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of primer on wall complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M & L for preparation of newly plastered surfaces and priming plastered surfaces with alkali resistant primer and applying two coats of oil bound distemper on walls complete all as specified and directed.

M & L for preperation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Taking down Chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exc. 1.50 Sqm but n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description n. exc 1 sqm each. complete all as specified and directed.

Taking down shutter of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

S&F pressed steel door frame of size 125X60mm with one or more rebates including necessary fixing lugs,hinges,lock strike plate etc complete all as specified and directed.

S & F Steel windows with side hung shutters including side box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

M & L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed .

M & L for Factory made of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed .

M & L for preparation of new or previously untreated surface of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube complete all as specified and directed .

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S F Butt hinges, extruded aluminium alloy with galvanised 100 mm long mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S & F for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .

S & F for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F for 250 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F for 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Framed work such as guard bar / grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; conforming to Fe.290.Gde-E-165. complete all as specified and directed .

S & F Angle iron for window/door frame Mild steel in flat, round or square bars, in available lengths Structural steel, rolled section such as joist, beam, channel, angle, tee, in available lengths, Fe-290 (Gde E-165) including finishing the surface smooth complete all as specified and directed.

M & L for preparation of new or previously untreated surface of Steel and iron of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide,zink crome complete all as specified and directed

M & L for 2nd class hardwood Plain fillets sectional area n. exc 3 Sq CM each square or rectangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

M & L for 2nd class hardwood beads, straight (any Size) for glazed or gauged joinery, recewed including mitred etc after removing beads from old shutters exc 3 but n exc 6 sq CM each square or rectangular in section, clean sawn, secured with nails or brads complete all as specified and directed .

M & L for flat iron for hold fast of doors / windows confirming to FE - 290 Gde E-165 complete all as specified and directed. (Flat Iron 250 x 30 x 3 mm thick @ 0.707 Kg / RM)

M & L for preparing surfaces of wood and wood based materials of any description and girth, backs of chowkats, etc, area tarred exc 0.1 sq. m but n exc 0.5 sq. m each and tarred with coat tar / black paint complete all specified and directed.

Cutting holes for inserting hold fasts in Brick walls built in cement mortar and making good disturbed portion in PCC (1: 2 :4) type B1 or in cement mortar (1:3) as required, depth of embedded portion exceeding half brick but not exceeding one brick for full brick walls, complete all as specified and as directed .

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S & F for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S & F Mortice lock, vertical type, size 100 mm, long 4 levers with handles as in repairs complete all as specified and directed.

S & F in repairs for butt hinges medium weight cold rolled mild steel of 75 mm size. complete all as specified and directed .

S & F in repairs for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .

S & F in repairs for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F in repairs for 100 mm extruded Aluminium aloy handles, fabricated type anodised complete all as specified and directed .

Taking down and refixing shutter after repair of any description n. exc 1 Sqm each in same opening complete all as specified and as directed.

Taking down and refixing shutter after repair of any description exc 1 Sqm but n. exc 2 Sqm each in same opening complete all as specified and as directed.

S & F in repairs for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F in repairs for 100 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F in repairs for 250 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S & F in repairs for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S & F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repair door closer hydraulically regulated of cast iron body, designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Fixing only aluminium chowkats / frame for door, windows and ventilator complete all as specified and directed.

S & F Aluminium beads with rubber gasket 20 mm width complete all as specified and directed.

S & F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S & F for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, hinges etc. complete all as specified and directed.

S & F 12 mm Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work complete all as specified and directed.

S & F 12 mm Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed in repair with screws to timber frame work complete all as specified and directed.

S & F Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

Sheet glass 5.5 mm thick fixed in repair ordinary quality and glazing with oil putty, beads in square exc 0.5 sq. m in each pane including hacking out old broken glass complete all as specified and directed.

S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortars including backing in floors, aprons etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring

M&L for Virified Ceramic tiles light colour 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

Ditto all as per Ser Item No 99.00 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for joint free nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm in floors {Superior/Premium quality, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for joint free nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

Ditto all as per Ser Item No 102.00 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F 450x300x7mm thick glazed ceramic coloured tile on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed.

S&F 300x200x7mm thick glazed ceramic coloured tile on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed.

Demolition of cement concrete terrazo (un-reinforced) in above ground floors for sunken not exceeding 15cm thick complete all as specified and directed.

M&L for 75mm thick PCC in (1:2:4) type B2 using 20mm graded stone agg as in sunken floor complete all as specified and as directed

M&L for PCC 1:5:10 type E2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:1½ : 3 or Bitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as specified and directed.

M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as specified and directed.

M&L for polythene flim black 50 micron laid in sunken floor complete all as specified and directed.

M&L for spout of 50mm bore PVC pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed

M&L for 25mm thick PCC 1:1.5:3 type A0 using 12.5mm graded stone agg as in sunken floor mixed with water proofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately)

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F aluminium snap grid powder coated frame (Size of Side angle 24X24mm, cross & Main Tee 24X32mm) work for false ceiling, size of grid 605 x 605mm along with 4mm dia mild steel wire class 3 as in suspenders complete all as specified and directed.

S&F Non asbestos 6mm thick fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Smruti Construction

S.R.M.K Enterprises

R k construction