Repairs to 75 kVA capacity manual voltage stabilizer along with allied works in the boiler house of GMC Srinagar

Amount

Repairs to the 75 KVA capacity manual voltage stabilizer installed in the Boiler House of Govt. Medical College, Srinagar by way of carrying out following repairs. The job includes testing of the voltage stabilizer on. No load & Full load after carrying out the repairs.

Rewinding of 75 KVA voltage stablizer's damaged coil in suitable guage insulated copper wire of standard quality. The insulating copper wire for rewinding of the stablizer to be provider by the firm. The job includes design, manufacturing and assembling of the core and coils, connections and clamping arrangements, immersing in insulating varnish and drying by suitable means. The job further includes providing and fitting of the fiber glass insulation tape, replacement of galvanised nuts and bolts etc. The job is to be carried out by way of using skilled labours and necessary tools and tackles to be provided by the firm. (The rate is excluding the scrap value as the coils have been stolen by the thieves.)

Providing and fitting of 12"x12" rotor of required rating and capacity

Providing and fitting of bush rod with bush cup of required rating and capacity

Providing and fitting of Volt meters of requisite size

Providing and filing of transformer oil

Providing and fitting of 35 sq.mm 3.5 core Aluminium armoured cable along with saddles, thimbles of required size etc as shall be required for the job

Providing & Fitting of 06 Sq.mm Copper insulated wire. The wire is to be fitted along wall etc by means of clips. Necessary cu thimbles required for the job to be provided by the contractor.

Providing & Fitting of 1.5 Sq.mm Copper insulated wire. The wire is to be fitted along wall etc by means of clips. Necessary cu thimbles required for the job to be provided by the contractor.

Supply, Instalation, Testig Commissioning of Gear Oil Transfer Pump with Cast Iron body, EN8 Gear and MS shaft. The oil transfer pump shall have a minimum discharge of 75 LPM and maximum pressure of 10 Kg /cm². The suction delivery of the pump shall be 32mm or suitable diameter complete with inlet & out let valves and other allied accessories. The pump shall be coupled with 3 phase, 03 HP, electric motor with an RPM of 1440. The assembly shall be mountewd on common base frame fabricated out of ISMC 75 and ISA 65x65x6mm and duly grouted in the cement concrete foundation. The job also includes providing and fitting of sub panel along with necessary cabling of required rating and size.

GOOD LUCK TRADERS