Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹44.8 L+₹2.3 L (5.44%)Rejected-Finance S NO 279 1 1A PLOT NO 113 KUTWAL COLONY SASTHE WASTI LOHEGAON PUNE 411 047 | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹45.0 L+₹2.6 L (6.03%)Rejected-Finance | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹45.5 L+₹3.0 L (7.13%)Rejected-Finance | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹45.9 L+₹3.4 L (8.07%)Rejected-Finance | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
8 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI BIJENDRA SHARMA IDSE EE
GARRISON ENGINEER (NW) VASCO Opposite KV No.2, School, Shantinagar, Vasco-Da-Gama, Goa-403802
8509/E8
2023_MES_589933_1
8509/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
VASCO
Class D Category d v
8 documents required · 8 mandatory
₹500
GE NW VASCO
₹90,000
Yes
21 Jul 2023
18 Apr 2023
10 May 2023
18 Apr 2023
8 May 2023
2 May 2023
19 Apr 2023 - 1 May 2023
Amount
Petty repairs of day to day complaints of internal Electric supply for Tech Bldg at INS Hansa areas comprising the following items including testing and commissioning all as directed:-
Supply and fix in repairs switch socket combinations 3 Pin and 5Amp combined flush type.
Supply and fix in repairs switch socket combination 6 Pin 6/16 Amp Combined flush type.
Supply and fix in repairs switch Piano, flush type single pole one way 5 Amp.
Supply and fix in repairs bell push piano flush type.
Supply and fix in repairs buzzer, ding dong AC 230 V, Single pole.
Supply and fix in repairs ceiling fan regulator stepped type 120 Watt single phase 230 V.
Supply and fix in repairs MCB 6 to 32 A, Single pole 10 KA, 240 V/ 415 V, C Series.
Supply and fix in repairs MCB, 4 Pole, 6- 32 A, 10 KA, 415 V, C-Series.
Supply and fix in repairs MCB 4 Pole 63 Amps 415 V, C Series.
Supply and fix in repairs single pole and neutral enclosure with two pin and earth plug and socket including complete with one single pole MCB 20 Amps 10 KA.
Supply and fix in repairs MCCB 4 Pole 100 Amps, 16 KA
Supply and fix in repairs MCCB 4 Pole 125 Amps, 16 KA
Supply and fix in repairs MCCB 3 Pole 100 Amps, 16 KA
Supply and fix in repairs MCCB 3 Pole 125 Amps, 16 KA
Supply and fix in repairs MCCB 3 Pole 160 Amps, 36 KA
Supply and fix in repairs MCCB 3 Pole 200 Amps, 36 KA
Supply and fix in repairs MCCB 3 Pole 250 Amps, 36 KA
Supply and fix in repairs MCCB 3 Pole 350 Amps, 36 KA
Supply and fix in repairs MCCB 3 Pole 400 Amps , 36 KA
Supply and fix in repairs RCCB, Double pole 300 MA, 40 Amps
Supply and fix in repairs ceiling rose 3 terminals, PVC /Polycarbonate Isolated body with ISI Mark.
Supply and fix in repairs lamp holder PVC / Polycarbonate type with back plate suitable for battern fittings including fixing on suitable PVC Ractangular blocks.
Supply and fix in repairs sheet metal enclosure suitable for mounting of MCCB 4 Pole 100 Amps, including fastner, nut bolts, conection wire and all other connected accessories.
Supply and fix in repairs ceiling fan capacitor 2.5 MFD Single phase 415 V.
M&L for removing the Ceiling fan, opening the fan motor servicing including replacement of worn out nut, bolts, washers, split pins , ball bearing etc greasing, assembling back and hanging back in its original position, testing and commssioning all as directed. NOTE: Ball bearing and sleeve bearing shall be measured and paid separately under supply only items.
Supply only in repairs ball bearing suitable for any size of Ceiling Fans.
Supply only in repairs plastic conopy top and bottom with tighten screw suitable for ceiling fan of any sweep/ type.
Supply and fix in repairs LED tube light fitting and tube light 1 x 18 Watts 4 feet long, 230V indoor decorative aluminum extruded LED integrated batten, complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed.
M & L opening the body cover of celing fan, exhaust fan, air circulator, pedestal fan of any type, any make of following and cutting the existing winding rewinding the same with new super enamelled copper winding wire of suitable gauge / size including necessary tapping, varnishing and packing complete and soldering new lead of copper wire three core cables of size 23/0.0076 testing complete including transportation from area of AGE E/M-I to workshop etc all as directed for the following:-
Ceiling fan 1200/1400mm sweep
Exhaust fan up to 300 mm sweep
Exhaust fan exc 300mm sweep not exc 450 mm sweep
Flame proof exhaust fan up to 300 mm sweep
Wall mounting fan up to 700 mm sweep
Attending complaints for day to day repair / maint work for Hangar light/ outer / inner perimeter / security / street / dispersal/high mast/search lights /any description at INS Hansa area by taking down carefully the existing non operational / unserviceable lights from and description, repair / replacement of unserviceable spares and re-fixing the same in the existing location after completion of repair work complete all as specified and directed by Engineer-in-Charge.
Note :- (a) All new spares for the above lights will measured and paid seperately under relevent itme of this schedule. (b) The Contractor / Contractor's supervisor shall be report to AGE E/M- I / INS Hansa maint office in all working days at 0900 AM and collect the complaint slip for defect/unserviceable lights list at Hansa premises and carrying out and complete the repair work in the same day before 1800 hrs. If the contractor fails to complete the repair work within the 03 working days after receipt of complaint slip necessary recovery @ Rs 100.00 per fittings per day shall be recovered from the actual workdone. For that a register shall be maintained and signed by both the Engineer-in-Charge and contractor. (c) Rate for all Tools and plants, safety equipments, transport including necessary minor spares such as insulation tape, connectors, fixing screws, connecting 2 core wires up to 2 mtr length shall be included in the quoted rates. Note: New Spares will be measured & paid under relevant items as supply only
Supply only LED driver with transformer suitable for 25 to 45 watts LED street/ceiling panel light fitting of complete all as specified and directed by Engineer-in-Charge.
Suppply only LED driver suitable for capacity 60 to 120 watts LED fittings complete all as specified and directed by Engineer-in-Charge.
Suppply only LED driver suitable for capacity 150 to 300 watts LED fittings complete all as specified and directed by Engineer-in-Charge.
M & L Point wiring for one light point or one fan point controlled by one switch with 1.5 Sqmm PVC insulated 1100 V grade multistranded copper conductor in PVC Casing and Capping including provision of 1.5 Sqmm PVC insualated copper conductor as earth continuity conductor all as directed.
All as per item No.4.00 above but for one 5A socket out let on independent board.
All as per item No.4.00 above but for one 5A Socket out let on same board with other switches.
All as per item No.4 above but for one 15 A Socket out let with 2.5 Sqmm Copper conductor including provision of 2.5 Sqmm PVC Insulated copper conductor as earth continuity conductor all as directed.
Taking down unserviceable point wiring copper or Aluminium (light, fan, or Sockets) completely including making good disturbed surfaces all as directed.
M & L Painting of Ceiling fans complete in site with one coat of synthetic enamel paint after cleaning all dust, by spraying including filling cavities with filler, writing MES No. etc complete all as specified and directed.
Checking of Ceiling fan complete in situ for proper fitment including. Checking of rubber reel, split pin, nut bolts, fan rod, fan clamp etc and replacement of defective / worn out split pin, nut bolts rubber red etc all as directed.
Periodical Inspection of Water Geyser 25 Ltrs / 50 Ltrs Capacity including checking of Built Safety valve, Neon indication Lamp, Fussible metal plug Temperature Control knob, Thermostate, thermal Cut out, Heating Control etc for proper function and reset if required or replace if unserviceable all as directed. Note :- For replacement, accessories / spares shall be measured under supply only as shown against mentioned item No.11.00 below:-
Supply only Heating Element suitable for Existing Water Geyser of Capacity 25 Ltrs / 50 Ltrs of any make .
Supply only safety valve suitable for existing 25 Ltrs /50 Ltrs capacity water Geyser of any make.
Supply only thermostat suitable for 50 Ltrs /25 Ltrs Capacity water Geysers of any make.
Supply only thermal Cut out bimetallic type suitable for 25 Ltrs /50 Ltrs capacity water Geyser.
Supply only Neon Indication Lamp suitable for water Geyser on /off indication.
M & L Aluminium conductor, steel reinforced of any size as per site requirement including fixing on LT Pole Insulators, Jumpers etc including dismantling old U/S Conductor.
Attending Electrical complaints like short circuit , No supply, wire burnt in switch boards etc in residential accomodation /offices including fault findings, rectification and testing all as directed by Engineer-in-Charge. Note: Material like wire for replacement if required shall be measured and paid separately under supply only.
Supply only PVC isulated multistranded Copper Conductor Cable 1100 V grade 1.5 Sqmm size for day to day repair work.
All as per item No.14.00 above but of size 2.5 Sqmm
All as per Item No.14.00 above but of size 4 Sqmm
Supply and fix in repair LT Cable jointing kit outdoor type straight through joint of size 70 Sqmm to 120 Sqmm including necessary excavation upto 2.5 Cum and making good the excavated area all as directed to match the existing.
All as per item No. 17.00 above for cable size 185 Sqmm to 240 Sqmm
Attending Electrical Complaints such as, LT UG Cable end Connection burnt at substation, cutting and reconnection of LT UG Cable at substation, replacement of burnt LT UG Cable lugs etc all as directed. NOTE: Cable lugs shall be measured and paid separately under supply only item.
Supply only LT UG Cable lugs Aluminium of size upto 50 Sqmm.
All as per item No.19.00 above but of size70 sqmm to 95 Sqmm
All as per item No.19.00 above but of size 240 .
All as per item No.19.00 above but size 185 Sqmm.
M&L for servicing of 4 pole structures LT/HT including checking all joints, jumbers etc for any loose connection, replacement of burnt jumber with new one, replacement of rusted nut bolts and apply petrolium jelly for all moving contacts all as directed by Engineer-in-Charge. Note:- All the spares required for the work is included in the quoted rate.
Material and lobour for Servicing of earth pit structure by disconnecting earth strip by opening nuts and bolts 4 pole structures LT/HT including checking all joints, jumbers etc for any loose connection, replacement of burnt jumber with new one, replacement of rusted nut bolts and apply petrolium jelly for all moving contacts all as directed by Engineer-in-Charge. Note:- All the spares required for the work is included in the quoted rate.
Labour only for removing all vegetation and cutting of tree branches from Electric poles of any size and length all as directed
Supply and Fix in repair Ceiling Fan motor with body complete suitable 1200 mm Sweep matching to blade of existing ceiling fan all as specified and as directed.
Supply and Fix in repair Fan Blade set of three suitable of any make and sweep up to 1200 mm sweep matching to existing ceiling fan all as specified and as directed. Note:- Fan Blade make and size should be supply with the mach of under relivent item of Sch A serial No 23 as above.
M & L in repairs for exhaust fan AC single phase 230V of size 300 mm sweep 1400 RPM heavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan all as specified.
M & L in repairs for exhaust fan AC single phase 230V of size 380 mm sweep 1400 RPM heavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan all as specified.
M & L in repairs for exhaust fan AC single phase 230V of size 450 mm sweep 1400 RPM heavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/ PVC connector to exhaust fan all as specified. Note :- for item No. 26.00 & 27.00 The quoted rate inclusive for all civil works such as cut opening of wall making good to shape and size as required at site.
Supply and fixing in repairs LED light fitting 1x18/20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protectio with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.
S & F in repairs knob suitable for Rotary type Flamproof switch in LM6, 15A single pole 250V complete all as specified and as directed.
S & F in repairs Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and as directed.
Shree Ram Enterprises
OM SAI ELECTRICALS
sapna enterprises
Shine Enterprises
D.K. ENTERPRISES
S and G Constructions
Susheel Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .