Remaining works for Renovation of Patel stadium, Ajmer

Amount

All work-H Schedule

Movable Badminton Pole Made of heavy duty tubular MS pipe in pair Metal pipe 39mm round Height : 1.5mtr 75mm nylon wheels Stainless steel pulley A very strong, durable & portable unit of 80 kgs weight on each side of complete in all respect of make STAG or equivalent

Supply & installation Badminton Net : Nylon turnament quality.Badminton Net : HDPE Mterial , Mesh Size 15-20 sqmm with tetron tape on top end with proper eyelets with nylon dori turnament quality net (Yonex / Vinex / Ashaway / cosco or equivalent prominent brand. Complete in all respect

Movable Goal Post for football Dimension (Size): 7.31 X 2.44 meter Material: Aluminium Pipe Diameter: 120 mm Round Pipe Thickness: 3.5 mm Back Support Pipe: 120 mm Round Back Support Thickness: 3.5mm Back Support Material: Aluminium Epoxy Paint Rust & Corrosion Free Wheel Size: 200 X 50 MM PU Wheel with bearing Net Clips - 220 Pcs with Nylon 3 MM Thick and Machine Knitted Net of good quality of make koxton/ cosco / NIVIA or equivalent Packing: Per Pair Make : STAG or equivalent Complete in all respect

Providing and fixing Backstop unit (Basketball poles). There shall be two (2) backstop units, and each consisting of the following parts : a) One (1) backboard b) One (1) basket ring with a ring mounting plate c) One (1) basket support structure d) Padding etc with following specifications The backboard shall be made of a suitable transparent material (of a Acrilic Fibre Glass), made in one (1) piece, non reflective, with a flat front surface and shall: Have a protective framework of the backboard support structure around the outer edge. Be manufactured such that, if broken, the piece of glass do not split off.The backboard shall be measured 1.8m (+ a maximum of 30mm) horizontally and 1.05m (+ a maximum of 20mm) vertically. All lines on the backboard shall be : In white, 50mm in width. The borders of the backboards shall be marked with a boundary line and an additional rectangle behind the ring as follows : Outsides dimentions : 590mm (+ a maximum of 20mm ) horizontally and 450mm (+ a maximum of 8mm ) vertically. The top edge of the base rectangle shall be level with the top of the ring and 150mm (-2mm) above the bottom edge of the backboard.Basket ring: The ring shall be made of solid steel and shall" Have an side diademeter of a minimum of 450mm and a maximum of 459mm. Be apinted orange within the following Natural Colour System (NCS) FIBA approved spectrum: 0800-Y70R 0090-Y70R. Have its metal a minimum of 16mm and a mximum of 20mm diameter. The net shall be attached to each ring in 12 palces. The fittings for the attachment shall : Not have any sharp edges or gaps, Have gaps smaller than 8mm to prevents fingers from entering.Basket net: The net shall be made of white cord and shall be Suspended from the rings, Manufactured so that they check the ball momentarily as it passes through the basket, No less than 400mm and no more than 450mm in length, manufactured with 12 loops to attach it to the rings . The upper section of the net shall be semi rigid to prevents: The net from rebounding up through or over the ring, creating possible entanglement. The ball from becoming trapped in the net or rebounding back out of the net. Backboard support structure: The rigidity of the backboard support structure with ring shall fulfill the requirements of the EN 1270 Norms. The visible vibrations of the backboard support unit shall end a maximum of Four (4) seconds after a dunkshot .Padding: The backboard and backboard support structure must be padded. The padding shall be of a single solid color and shall be the same color on both backboards and support structures. The padding shall be 20 to 27mm thick from the front, back and side surface of the backboards. The padding shall be 48 to 55 mm thick from the bottom edge of the backboards. the padding shall be cover the bottom surface of each backboard and the side surface to a distance of 350 to 450mm from the bottom. The front and back surface must be covered to a mainimum distance of 20 to 25mm from the bottom of each backboard. All padding shall: Be constructed so as to prevent limbs from being trapped, Have a maximum indentation factor of 50%. This means that when a force is applied suddenly to the padding, the indentation in the padding does not exceed 50% of its original thickness.

Supply & installation Tennis Poles: Moveable Type size : Stanadard Height; 1.07m Pole will Made 4'' square Pipe ,Garware equivalent Make Nylon net ,Best quality PU spray Paint omplete in all respect

Supply & installation Starting Block body type foot-steel SS304 and top high quality fiber with Backstroke Handle as per standards with complete fittings if required. Make Austin or equivalent

Supply and installation of Filter Sand Media for filter plant as required size as per requirement.

Supply and installation of EYE Bull Nozzel in existing swimming pool as per requirement . Dia 63mm or as per instruction of engineer incharge

Supply and installation of Swimming Pool Racing Lane in existing swimming pool as per international standard with required colour coding and pvc body with Lane Collecting Wheels, rolling bucket to keep them safe. Make Austin or equivalent

supply and installation of highbay light of 120/150 watt Built-In HIGH QUALITY POWER LED DRIVER with HIGH POWER FACTOR >0.97 (True Rated Power Consumption) || Voltage Surge Protection Circuit - 4 KVa || THD < 10% IP65 Standard - Water & Dust Proof || All Aluminium Body with SMD LEDs covered by Optical Lens for en--hanced illumination|| Eye-Bolt for easy Ceiling Mounting || Excellent Heat Management enhancing product life, 130 LUMENS/WATT: Intense Lighting Performance || 50,000 Hours Life-Span || 100% ECO-FRIENDLY:

supply and installation of Sports Light for TT AND BADMINTON COURT of 500 watt Built-In HIGH QUALITY POWER LED DRIVER with HIGH POWER FACTOR >0.97 (True Rated Power Consumption) || Voltage Surge Protection Circuit - 4 KVa || THD < 10% IP65 Standard - Water & Dust Proof || All Aluminium Body with SMD LEDs covered by Optical Lens for enhanced illumination|| Eye-Bolt for easy Ceiling Mounting || Excellent Heat Management enhancing product life, 130 LUMENS/WATT: Intense Lighting Performance || 50,000 Hours Life-Span |

Providing and Fixing Water gun available in 2" male threaded connection and . operating pressure ranges 2- 4 kg/cm2 radius, Trajectory Angle: 27o coverage 35-40 m Aluminum die casted body,Heavy duty brass nut, tube, nozzles & Diffusor Screw,tainless Steel Pivot Pin, springs, Nut and bolt and arm with jet break screw to change the water jet from heavy droplets to fine spray with ADAPTER SET WITH RUBBER WASHER AND FOOTBATTEN, 1 TYPE (C) ENDCAP 50MM, 1 ISI APPROVED G.I. RISER PIPE (4FT), 4 LEG 1.5 m HEIGHT ADJUSTABLE STAND complete in all respect

Providing and Fixing Water gun available in 1 1/2"” male threaded connection and . operating pressure ranges 2- 4 kg/cm2 Trajectory Angle: 23o radius coverage 25-30 m Aluminum die casted body,Heavy duty brass nut, tube, nozzles & Diffusor Screw,tainless Steel Pivot Pin, springs, Nut and bolt and arm with jet break screw to change the water jet from heavy droplets to fine spray. with ADAPTER SET WITH RUBBER WASHER AND FOOTBATTEN, 1 TYPE (C) ENDCAP 50MM, 1 ISI APPROVED G.I. RISER PIPE (4FT), 4 LEG 1.5 m HEIGHT ADJUSTABLE STAND complete in all respect

Providing and Fixing 3/4' Brass Sprinkler with male thread connection , bronze body and arm , both part circle and part circle operation , nozzle -4.76x 3.17 , pressure - 2 , radius - 14-16 m

Providing and Fixing Adapter Comp 50 mm to 110 mm HDPE

Providing and fixing HDPE coupled pipe at least 2.5 kg per sqcm 75 mm dia 6 meter each pipe length with rubbre ring and clamp

Providing, Fixing of Quick Coupling Hydrant brass valve 75mm with Five Sets of Key & Sweilve Elbow As per site incharges

Providing and fixing structural glazing elevation work with aluminium composite pannel (ACP) sheet of size 3.50 mm (wonder, Alstar, Alstone) of any colour with aluminium pipe 16 gauge 50 x 25 mm and providing and fixing of any reflective glass of 5 mm with aluminium for 1¾ x 1¾" of 16 gauge with silicon (alstone MC/ SOUDLE) and glazing tape and angle 1" x 1½"

Supply and installation of Led outdoor wall washers linear waterproof lights with narrow-angle leds installed to highlight tall walls and pillars of any building or structure needs to light up.Color - 3k/4k/6k/rgb. Beam angle 15/25/40/eliptical. Ip65, 12/24v input. Output 48w.

Supply and installation of DMX lighting controller Controls Up to 12 Separate Lights 6 Programmable Chases to control and lightup the connected lights upto 800 watts of load.

Bidder Name

Amount

M/S Naresh Kumar Goyal(GSTN-08AQTPG6690B1ZJ)