Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹35.3 L+₹4.7 L (15.2%)Rejected-Finance SHOP NO 4 GULATI MARKET KRISHNA NAGAR NEHRU GARDEN ROAD JALANDHAR PUNJAB 144001 | JALANDHAR | PUNJAB | 144001 | L2 | Rejected-Finance L2 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
25 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
Repair to doors, windows and ceiling etc at OTM and Md Accn under AGE B/R-I of GE (East) Jalandhar Cantt
2023_MES_606202_1
GE/JULL/ET-27/2023-24
Open Tender
Civil Works
Item Rate
273 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹60,000
Yes
8 Sept 2023
27 Jun 2023
2 Aug 2023
27 Jun 2023
25 Jul 2023
13 Jul 2023
Amount
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc. 1.5 Sqm each door/ window complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each door/ window complete all as specified and directed.
Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.
Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhat etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.
Material and labour 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Material and labour 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.
Supply and fixing factory made 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 25 x 6mm thick 2nd class hard wood lipping on edge complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.
Supply and fixing in repair steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters including box type/ projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars, hold fast, tower bolts and handles etc and necessary cooler arrangement in window and fixed with PCC (1:2:4), complete as per Drg No. CEJZ/TD-1020/08 sheet 1/3 to 3/3.
Supply and fixing anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge
Material and labour for anodised aluminium grill (anodised transparent or dyed to required schade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/ stanless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge.
Supply and fixing mortice lock, vertical type size 100mm 4 lever brass body complete all as specified and directed.
Material and labour for double action spring hinges, mild steel with steel wire spring, stove enameled, black complete all as specified and directed
Supply and fixing 100mm butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.
Supply and fixing 150mm aluminium handles, cast type, anodised complete all as specified and directed.
Supply and fixing 100mm aluminium handles, cast type, anodised complete all as specified and directed.
Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
Material and labour 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and directed.
Material and labour 3mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.
Supply and fixing in repair factory made built-in steel cup board with pressed steel frame of size 75mm x 50mm x 1.25mm thick with pressed steel shutter 1.25mm thick fixed to masonry wall by hold fasts, made out of 25 x 3mm flat iron including MS hanging rod of 10mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provn of MS peg set 3 pegs including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and shown on Drg No. CEJZ/TD/20/11 sheet 1/5 to 5/5 dated 01 Aug 2011, complete all as specified and directed
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fixing Prayag Syment butt hinges 100mm long all as specified and directed.
Supply and fixing Prayag Syment tower bolt 200mm long all as specified and directed.
Supply and fixing Prayag Syment bow handle 125mm long all as specified and directed.
Material and labour mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate fixed in repairs complete all as specified and directed.
Supply and fixing 125mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame fixed in repairs complete all as specified and directed.
Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.
Supply and fixing mild steel pressed handles, oval type, stove enameled black 125mm size complete fixed in repairs all as specified and directed.
Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.
Supply and fixing 100mm size hasp and staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed
Supply and fixing extruded aluminium alloy handles, fabricated type, anodised, D-type, 100mm size, all as specified and directed.
Supply and fixing continuous (piano) hinges 40mm width of flaps, mild steel, bright finish or electro galvanized with cupboard or drawers complete all as specified and directed
Supply and fixing aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long all as specified and directed.
Supply and fixing floor door stopper (double) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 150mm complete all as specified.
Supply and fixing 20mm dia curtain rails mild steel chromium plated with fixing brackets fixed in cup boards complete all as specified and directed.
Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.
Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
Supply and fixing peg set of 5 of PTMT fixed to rear side of door shutter in bath complete all as specified and directed.
Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed in repair complete all as specified and directed.
Supply and fixing in repairs stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785mm x 255mm and weight not less than 8 kg each of approved quality complete all as specified and directed.
Supply and fixing sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe complete all as specified and directed.
Supply and fixing sink with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 550mm x 450mm bowl size 500mm x 400mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.
Supply and fixing hollow PVC wall lining consisting of 5mm thick wood grain PVC sheet, solvent cement and fixing to wall to make PVC frame as and fixing at site on PVC frame complete all as specified and directed
Supply and fixing false ceiling with Everest fibre cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS : 14862) of size 595 x 595mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking meta grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main ‘T’ runner with suitably spaced joints to get required length and 15 x 32mm made from 0.3mm thick sheet and cross ‘T’ of size 15 x 32mm made of 0.30mm sheet, spaced between main ‘T’ at 600mm c/c to form a grid of 600 x 600mm and wall angle of size 15 x 20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including, required cutting/ making, opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc. main ‘T’ runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main ‘T’ bottom exposed width of 15mm of all T-sections shall be center black pre-painted with polyester paint and having a load bearing capacity of 12 Kg/ Sqm complete all as specified and directed
Dismantling of AC sheets/CGI/Galvalume sheet in roof covering, complete all as specified and directed.
Dismantling timber scantlings 40 sq cm and over in section unframed work, in any position all as specified.
Material and labour for 6mm thick fibre cement corrugated or semi corrugated sheets in roof covering, fixed with J-type hook or L-type hook etc, complete all as specified and directed
All as per Srl Item No 53.00 here-in-before but except sheets
Material and labour for 6mm thick fibre cement two pieces adjustable plain serrated ridge for corrugated or semi corrugated sheets, complete all as specified and directed
Supply and fixing Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed
Supply and fixing Pre-painted Galvalume aluminium Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed
Supply and fixing 0.63mm thick, Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with each screws and washers, in roofs, walls etc. with grade of zinc coating 275, fixed with L-type or J-type or cranked hook bolts in lieu of screws, complete all as specified and directed
All as per Srl Item No 58.00 here-in-before but except sheets
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed
Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails, post etc and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250 Quality 'A' , complete all as specified and directed
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed complete all as specified.
Material and labour 10mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour 5mm thick rendering in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified and directed
Material and labour for complete removal of existing treatment by washing, rubbing down and stopping etc on wall and ceiling surfaces and applying two coat of oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified.
Material and labour preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.
Material and labour preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation of old surfaces of ceiling including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.
Material and labour preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint complete all as specified and directed.
Material and labour for preparation of old decorated plastered or un-plastered surfaces of walls including cornices, pilasters etc and applying two coats of cement base paint complete all as specified & directed.
Demolition of brick work as in walls/ parapet walls removing grass fungus weed, roots of trees completely, grown on roof/ wall surfaces complete all as specified and directed.
Material and labour brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.
All as per Ser item No 75.00 here-in-before but except bricks
FRIENDS ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .