RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled Yes Wheeled Skid Steer Loader ( 12 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Self Propelled wheeled machine which has front- mounted equipment primarily designed for loading operation (bucket use) and which loads or Yes Yes 1/8 excavates through forward motion of the machine Conforming to IS/ISO 7131: 2009 Yes Yes Make - * Model Number - * Type of loader Wheeled Wheeled Attachment multi-purpose bucket multi-purpose bucket Ignition type Diesel Diesel Aspiration Naturally aspirated Naturally aspirated
Requiredmechanically supercharged
Requiredmechanically turbocharged Number Of Cylinders 4 Any applicable numeric value bore (mm) 84 Any applicable numeric value stroke (mm) 100 Any applicable numeric value displacement (cc) 2216 * Net flywheel power at given engine speed (hp) 46 Any applicable numeric value Maximum Engine torque (Nm) 143 Any applicable numeric value Engine cooling system Liquid cooled Air cooled
RequiredLiquid cooled Type of fuel - * Engine location Rear * Drive system All-wheel drive Front-wheel drive
RequiredRear wheel drive
RequiredAll-wheel drive Emission Complaince BS III BS III
RequiredBS IV Gross Power (hp) 49.5 48.8
Required49.5
Required51.0
Required59.0
Required60.0 Operating Weight (Kg) 2830 2365.0
Required2830.0
Required2581.0
Required3050.0 Arm lifting force 14122 Any applicable numeric value Operating Speed (kmph) 12 Any applicable numeric value Maximum Speed (kmph) 12 Any applicable numeric value 2/8 Operating Load Rating 612 Any applicable numeric value Wheel Base (mm) 1070 Any applicable numeric value Ground Clearance (mm) 210 Any applicable numeric value Operating voltage (Volts) 12 Any applicable numeric value Alternator Supplied Amperage (Amp) 65 * Operating mass (kg) 2830 Any applicable numeric value Shipping Mass (kg) 2770 Any applicable numeric value Certification Parameters Vehicle Certification ARAI/VRDE/ICAT Yes Yes If No
Requiredmention the name of Vehicle Certification agency - * Vehicle Certification name and date - * Compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR rules Yes Yes Availibility of test report for the product from Any ILAC/NABl accredited/central government lab to be furnished to buyers on demand Yes Yes Responsibility of Registration with RTO Yes Yes IS 11114 : 2006 Earth-moving machinery - Definitions of dimensions and codes: base machine Yes Yes IS 11114 : 2006 Earth-moving machinery - Definitions of dimensions and codes: Equipment Yes Yes 3/8 and attachments IS/ISO 6165 : 2012 Earth moving machinery - basic types - Identification and terms and definitions Yes Yes IS 13116 : 2006 Earth-moving machinery -Engine Test Code - Net power Yes Yes ISO 3450: Earth Moving Machinery -Braking systems of Rubber-tyred machines -Systems and Performance requirements and test procedures Yes Yes IS13116 : 2006 Earth- moving machinery -Engine Test Code - Net power Yes Yes Constructional Parameters Overall length with attachment 3490 * Overall operating height 3900 Any applicable numeric value Bucket capacity 0.4 * dump angle (degree) 42 * dump height 2260 * maximum dump height when clam open 2300 * maximum dump height when clam closed 3900 * Maximum dump height
Requiredside 0 * Rollback (specifiy height) 3900 * Maximum rollback at ground 30 * carry position - * maximum rollback at carry position 42 * Minimum turning radius with bucket in carry position 2090 * digging depth -10 * 4/8 bucket width 1696 * maximum grading angle - * Operating load 612 Any applicable numeric value breakout force 18142 * machine clearance radius 2090 * TURNING RADIUS FROM CENTER - MACHINE REAR 1650 * TURNING RADIUS FROM CENTER - INC BUCKET 2090 * Type of transmission hydrostatic Manual shift with flywheel clutch
Requiredpowershift with torque converter
Requiredhydrostatic
Requiredelectric Number Of forward speed 1 * Number Of Reverse speed 1 * Maximum forward travel speed (kmph) 12 * Maximum reverse travel speed (kmph) 12 * Hydraulic pump system type - * Hydraulic pump flow at given pressure (l/h) - * Hydraulic pump flow at given speed (l/h) 4200 * Maximum normal hydraulic system operating pressure 23000 * Hydraulic system fluid capacity 69 * Type of filteration system - * Type of final drive - * Type and actuation system of the service brake - * Type and actuation system of the parking brake - * 5/8 Type of Driving Axle Hydrostatic Fixed
RequiredOscillating
RequiredBevel gear and pinion
RequiredDifferential
RequiredTwo-speed
RequiredHydrostatic
RequiredPlanetary Final drive Steering system All-Wheel Steer Front-Wheel Steer
RequiredRear Wheel Steer
RequiredAll- Wheel Steer
RequiredArticulated Steer
RequiredWheel-skid Steer Type of tyre - * Size of tyre - * Tyre tread - * Tyre Ply rating - * Rim Size - * Fuel tank capacity 98 Any applicable numeric value cooling system fluid capacity 10 * hydraulic tank fluid capacity 69 * Engine crankcase capacity 7.5 * final drive case capacity 38 * pump drives capacity 70 * Height to hinge pin
Requiredfully raised 3000 * Overall operating height when fully raised 3900 * Maximum scarifier lift height 0 * Performance Parameters Net Engine Power 46 Any applicable numeric value Tipping load at maxiimum reach (KN) 1224 Any applicable numeric value Lift capacity to maximum height 3000 Any applicable numeric value Rated operating capacity 612 Any applicable numeric value Breakout force 18142 Any applicable numeric value raising time 3.61 Any applicable numeric value 6/8 Lowering time 3.48 * Dump time 1.9 * Maximum travel speed (kmph) 12 Any applicable numeric value Braking performance - * Turning radius 2090 * Warranty time 12 Any applicable numeric value Operating hours during warranty period 2000 Any applicable numeric value Battery warranty 12 Any applicable numeric value Number Of Free services 4 Any applicable numeric value Transportation charge (Rs) - * Maintenance cost for first 5000 Hrs - * Self-propelled crawler machine which has front-mounted equipment primarily designed for loading operation (bucket use) and which loads or excavates through forward motion of the machine - * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
