REPAIR MAINT OF JOINERIES, PLASTERING, FLOORING, PLUMBING AND OTHER MISC BR WORKS AT ZONE II AT BASISTHA AREA UNDER GE GUWAHATI

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each. complete all as directed.

Taking down chowkat with shutter without taking off shutter from the frame exc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed.

Taking down shutters n.exc 1.00 sqm each of any description complete all as directed.

Taking down shutters exc 1.00 sqm but n.exc 2.00 sqm each of any description complete all as directed.

M&L second class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed.

S&F Factory made second class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F Factory made second class hardwood 30mm thick Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) supplied and fitted to chowkats complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete as required and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as specified in SSR Part I, Section 8 complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed

S&F 20mm thick second class hardwood, Boarding, with nails in any situation (except flooring and skirting), planned both sides with butt joints complete all as specified and as directed

M&L for preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair 600x450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 100mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 300mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 75mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L false ceiling with 10 mm thick 600mm x900mm plaster of Paris sheets fixed with machine screws on and including GI channel 18 gauge thick grid work, main joists placed at 750 mm centre to centre , cross joists placed at 450mm centre to centre, hanging with 6mm dia GI wire suspenders from roof, ‘J’ hooks bolts and nuts etc and treating the POP sheets with thin layer of POP with Gypsum anhydrous binder and prepare the surface till smooth surface is achieved; and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of ceiling sheets all complete as required as per manufacturer’s instructions and as directed .

S&F in repair, 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws in the existing ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed baluster; walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and as directed..

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L type or J typpe or cranked hook bolt complete all as specified and as directed

S&F 125mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F in repair, 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ,140mm Overall length of cover plate, complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work for false ceiling (Size of grid 605 x 605mm) with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 4mm thk Pre Painted Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminum framework with screws, and applying two coats of oil bound distemper over a coat of primer complete as required as per manufacturer’s instructions and as directed .

Demolition of brick work built in cement mortar of any description including removing debries of the site, complete all as specified and as directed.

M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 incl demolition of old bricks complete all as specified and directed.

M&L Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete including removing debries of the site, complete all as specified and as directed.

M&L 15mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers(10mm & 5mm) seperately mixed with water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid seperately under appropiate item.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L Rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished surface even and fair without using extra cement complete all as specified and as directed.

M&L prepartion of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L prepration of new plastered surfaces of wall applying two coat of oil emulsion distemper over a coat Chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and as directed.

M&L preparation of old plastered or unplastered surfaces of walls by scrubbing down using electric sander machine or steel wire brushing scrapping down smokes soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of ceilings by scrubbing down using electric sander machine or steel wire brushing scrapping down smokes soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of walls by scrubbing down using electric sander machine or steel wire brushing scrapping down smokes soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling by scrubbing down using electric sander machine or steel wire brushing scrapping down smokes soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of oil emulsion distemper complete all as specified and directed.

Demoliation Cement concrete (unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

Taking out floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as specified and as directed.

M&L for light shade vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set and jointed :in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer 1:6 complete all as specified and as directed.

M&L Non skid coloured tiles 7 to 8 mm thick(square/ rectangular) area of each tiles exc.0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slury over and including cement screed 15 mm thick 1:6 complete all as specified and as directed.

M&L Coloured glazed ceramic tiles 300 x 450 x 7 mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed.

S&F 15mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete all as specified and as directed.

S&F 20mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as directed.

S&F 110mm UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings complete all as specified and as directed..

S&F 110mm dia UPVC (SWR) bends of any radius complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (confoirming to IS 12701-1996) multi layer hoisted and fixed in position 500 ltrs capacity complete all as specified in SSR Part I, including necessary dismantling old unserviceablle tank complete all as specified and as directed

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (confoirming to IS 12701-1996) multi layer hoisted and fixed in position 1000 ltrs capacity complete all as specified in SSR Part I, including necessary dismantling old unserviceablle tank complete all as specified and as directed

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 150mm cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate) complete all as specified and as directed.

S&F in repair Vitreous China, pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S&F in repair, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair valveless double action syphonic action 10 ltr capacity PVC flushing cistern low level white colour including PVC flush pipe of required length complete all as specified and directed

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and directed.

S&F in repair , aluminum anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F in repair 15mm bore chromimum plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore stop valves Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs, 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete as specified and as directed.

S&F in repair 15mm bore pillar taps, cast copper alloy with capston heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed

S&F in repairs,15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L preparing new Steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Demoliation of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L sweeping clean and washing down with water to remove dust, etc., Brushing neat cement slurry with 3.0kg of cement per sq. metre and providing 40mm thick cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in roof padding/slope correction finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

S&F in repair 18/19mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and as directed.

S&F Hand shower (health faucet) with 1 meter long flexible tube & wall hook(braided tube) complete all as specified and as directed Make- PRAYAG CAT No-BEA 40S or equivalent as approved by GE from list of approved makes.

S & F in repair wall mounted, wall mixer 3-in-1, system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and as directed.Make JAQUAR cat no SOL-6281 or equivalent as approved by GE from list of approved makes.all as specified and as directed.

S&F stainless curtain rod of wooden finish 20mm dia thickness not less than 0.75mm, fixed with curtain rod holder fixed in walls with screws and finials caps with 6 Nos of curtain ring per RM complete all as specified and directed. Note: Curtain rod holder and finials caps will be measured and paid seperately at Supply only rates)

Supply only decorative stainless curtain holding braket suitable for holiding 20mm curtain rod heavy duty complete all as specified and directed.

Supply only decorative stainless steel finial end cap suitable for curtain rod of 20mm dia as approved complete all as specified and directed.

M/s L A Enterprise

M/S M.S. ENTERPRISE

M/S SEWAK SINGH

DEEP CONSTRUCTION

M.G. ENTERPRISE