Repair of EI and Fans and AC Units pre-AMC period at New TE Port Blair.

Supplying and fixing 36 watt LED panel luminaires recessed type, 230V, 50Hz, including making all electrical connections with suitable size PVC insulated copper conductor wire etc. as required (M/s Havells or SS make)

Supplying of ceiling fan 1200 mm sweep, suitable for 230V, 50 HZ, ac supply and installation, testing and commissioning of the same including disconnecting all electrical connections and dismantling the existing fan, connections etc. as required (Make M/s Havells/Anchor or SS make)

Supplying and fixing LED lamp 0.5/5/9 watts lamp, 230 V etc. as required

Supplying and fixing LED type 4 ft light fitting of 20 Watt, 230V, 50HZ, including making all electrical connections with suitable size PVC insulated copper conductor wire etc. as required (M/s Havells or SS make)

Pdg & fixing of 45 watt LED Street light luminaires with polycarbonate cover and driver in the existing brackets of pole, i/c connection, as reqd.

Supplying & fixing of exhaust fan 300 mm sweep, with 900 rpm, 230V, 50Hz, including making openings on walls and properly fastening with fastners and GI strips , i/c making connection, testing, commissioning, sealing the leaks for preventing entry of rain water, etc. as required. ( Make Havells or SS)

Wiring for circuit / submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required.

2x1.5 Sqmm +1x1.5 Sqmm

2x4 Sqmm +1x4 Sqmm

Supplying and fixing of modular PVC enclosure along with modular base & cover plate for modular switch in recess etc as required ( 12 Module)

Supplying and fixing following accessories including connections etc as required

6/10 A 1 way modular switch

6 /10 A Socket Outlet

Supplying and fixing PVC batten/ angle holder including, connection etc. as required

Servicing and repairing of submersible type 2.0 HP pump motor set completely, i/c cleaning the pump, impellers, shaft, and rewinding of motor, heat varnishing, baking, replacing of rubber gasket, etc complete as reqd.

Supplying & Charging refrigerent in existing AC unit as per manufacturer recommendations complete as required ( 2 Nos. 3.5TR and 7 Nos 1.5TR)

Supplying and fixing the following spares in the existing AC units including dismantling the faulty one, fixing, connections with existing wires etc as required

36 MFD Capacitor

100 / 120 MFD Capacitor

PCB board (Indoor/Outdoor)

Out door condensor fan motor

Indoor blower motor

Four pole contactor 16A

Fan blade

Temperature sensor (both indoor and outdoor)

K. M. ENTERPRISE