REPAIR REPLACEMENT OF HARDSTANDING REPAIR TO BOUNDARY WALL REPAIR TO GATE FENCING WORK DRAIN DRAIN COVER ETC OF OTM AND MD ACCN OF POWAI RHQ DHQ WORLI MANKHURD MURUD JANJIRA PANVEL MALAD UNDER GE (I) (CG) DAMAN

Amount

Dismantling mild steel iron work of any description not otherwise provided for complete all as specified and directed

M&L for mild steel angle iron post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire ertc conforming to Fe-290 Gde E-165 complete all as specified & directed.

Providing and fixing punched tape concertina coil 610mm dia made with high tensile strength galvanized mild steel wire 2.60mm dia as per IS 4454 strip material ( galvanized MS strip as per IS-1730) upto 3 metre height of wall with angle iron 'Y' shaped placed 3.00 apart and with 9 horizontal R.B.T stud tied with G.I staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron with reinforced barbed tape (RBT)/ spring core (2.6mm dia) wire minimum barb 9mm width,loop spacing 250 ± 20mm,coil length 9m and fixing and laid in position etc of make as approved by GE confirming to the specification and fixing with Y shape angle iron with 8 Nos horizontal R.B.T (Reinforced Barbed Tape) wire,stud tied with GI staple or GI clips to retain horizontal (not allow sagging) complete all as specified and directed including dismantling of old from existing place. Note:-M.S. angle (Y-Shape) shall be paid separately.

Material and Labour for plain cement concrete( 1:2:4) type B0 using 12.5mm graded stone aggregate as in coping, kerbs or mud stops or rounded, chamfered in edges and benching ,complete all as specified .

M & L for running welding 6mm but n.exc 9 mm in repair to existing/new member complete all as specified and directed.

Material and Labour for fixing glass coping on top of wall using cement mortar 1:3 complete all as specified .

M&L for preparation of new steel surfaces of any descriptrion over 10 cm width or girth and applying two coat of synthetic enamel painting over one coat of red oxide zinc chrome primer to steel surface complete all as specified and directed.

M&L for preparation of old painted Steel surfaces of any descriptrion over 10 cm width or girth and applying one coat of synthetic enamel painting to steel surface as specified and as directed.

Demolition of unreinforced cement concrete complete all as specified and directed by Engineer in charge

M & L for hard core of broken stone of gauge n.exc 63mm deposited spread and levelled in layer n exc 15 cm thick watered and well rammed to true surfaces complete all as specified and directed.

M & L 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggredate) as in sub base complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block with glossy finish of any size confirming to IS 15658-2006 of 60mm thickness M-35 Grade fixed with grey cement and no pigment including 50mm thick sand cushioning complete all as specified and directed by Engr-in-Chrage. (Make:Nitco/Coral/Johnson)

M & for PCC 1:2:4 type B-1 (using 20mm graded aggregate) in kerbs,rounded or chamfered on edges including necessary form work complete all asspecified and directed.

M & L for 70mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in plinth protection complete all as specified and directed.

M & L for Plastic dividing strips, 1.5mm thick and 38mm in width fixing in concrete complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and directed.

S & F Pre-painted galvatume aluminium zink AZ-150 coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws with bent to a curve as company manufatured (as any radius as per requirment) including dismantling of AC sheet roofing of any description and for any position complete all as specified and directed by Engr-in-Chrage. (Make: AZ-150 TATA/JSW)

S & F Pre-painted galvatume aluminium zink AZ-150 coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws with bent to a curve as company manufatured (as any radius as per requirment) complete all as specified and directed by Engr-in-Chrage.(Make: AZ-150 TATA/JSW)

M&L Brick work with sub class B bricks straight or curvedd on plan exc 6m mean radius built in CM 1:4 including demolition of old brick masonry from existing position. complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick work surfaces including racking out joints, hacking for key ,scrubbing down with water etc.

M & L rendering 20mm thick (15+5) Ready mix plaster to wall and ceiling treated surfaces with Premix plaster with dry mix of proportioned well graded fine aggregates, cement & powder admixutres or polymers/ chemicals confirming to BIS, EN, BS specification standards of approved brand & manufacturer on surface of Brick Work, Cement Concrete/RCC work, Cement concrete Block work applied as per the manufacture's specifications etc. all complete including scaffolding all as specified and directed as per the directions of Engineer-in-charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for 20mm thick granite (of any type) tiles machine cut in skirting/dado laid over 10 mm thick rendering in CM (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type, complete including dismantling of old one. all as specified and directed

Dismantling wall and celling board any thickness, including cover fillets.

S & F Anodised aluminium snap grid frame work for flase ceiling all as specified complete all as specified and directed by Engr-in-Chrage.

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M & L for exposed metal frame ceiling with 8mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

BA Enterprises (BID ID -3138144)

M/s Himanshu Tyagi (BID ID -3146628)

Jay Jyotirling construction co. (BID ID -3146885)