Works

Earth work excavating and depositing on bank with in initial lead of 10m and initial lift of 2m in hard stiffy clay, stiff black cotton, hard red earth shales murrams, gravel, stoney earth and earth mixed with small size boulders etc., complete complying with standard specification and as directed by the departmental officers.

Dismantling without damaging the near by structurers if any clearing away and carefully stacking materials useful for reuse for any thickness of wall in Brick or stone masonry in cement mortar walls under 3m high etc., complete complying with standard specification and as directed by the departmental officers.

Dismantling, without damaging the near by structurers if any clearing away and carefully stacking materials useful for reuse for any thickness of Plain cement concrete complete complying with standard specification and as directed by the Engineer in charge of work.

Earthwork excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size of boulders hard gravelly soil inclusive of shoring to full depth strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated soil other than sand in layers of not more than 15 cm thick, well rammed, consolidated and depositing the surplus earth in places as shown by the departmental officers with an initial lead of 10 (Ten) metres and initial lift of 2 (Two) metres and clearing, levelling the site etc., complete complying with standard specification and as directed by the departmental officers.

Collection and Supply of M.Sand gravel mix 1:1 (one sand and one gravel) ratio for basement / filter zone including stacking, mixing and spreading the sand gravel mix in layers of not exceeding in 150 mm thickness over properly prepared surface, watering and consolidating the same with approved type of compaction equipment including stacking for pre-measurement etc complete complying with the standard specification and as directed by the Engineer in charge of the work.

Providing and placing in position of Plain Cement Concrete M15using hard broken granite coarse aggregate (well graded) size of 40mm to I.S. Specification grading (to achieve the specified characteristic strength of 15 N /mm2 at 28 days) and mixing the ingredients by using mixer machine including dewatering of the placement site by bailing / pumping and dewatering wherever necessary laying the concrete in layers as directed and in bays, compacting, watering, curing, finishing the surface with all leads and lifts so as to attain the profile and strength as specified in the approved drawings, complete complying with standard specification and as directed by the departmental officers.(with vibration)

Providing and placing in position of Plain Cement Concrete M15 using hard broken granite coarse aggregate of nominal maximum size of 20 mm to I.S. Specification grading (to achieve the specified characteristic strength of 15 N/mm2 at 28 days) and mixing the ingredients in by using mixer machine including dewatering of the placement site by bailing / pumping and dewatering wherever necessary laying the concrete in layers as directed and in bays compacting, watering, curing, finishing the surface with all leads and lifts so as to attain the profile and strength as specified in the approved drawing and specification for various depth and height below and above ground level etc., complete complying with standard specification and as directed by the departmental officers.(with Vibration)

Providing and placing in position of Plain Cement Concrete of M15 graded mix using hard broken granite coarse aggregate 60% of nominal maximum size of 40 mm and 40% of nominal maximum size of 20 mm to I.S. Specification grading (to achieve the specified characteristic strength of 15 N/mm2 at 28 days) and mixing the ingredients by using mixer machine including dewatering of the placement site by bailing / pumping and dewatering wherever necessary, laying in concrete in layers as directed and in bays compacting, vibrating, watering, curing, finishing the surface with all leads and lifts so as to attain the profile and strength as specified in the approved drawings and specification for various depth and height below and above ground level etc., complete complying with standard specification and as directed by the departmental officers (with Vibration)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 m height for Plane surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90 x 60 cm and 10 BG stiffened with welded mild steel angle, of size 25 mm x 25 mm x 3 mm for boarding laid over silver oak joist of size 10cm x 6.5 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with standard specification and as directed by the departmental officers Centering with strutting

Providing and placing in position of Plain Cement Concrete of M20 grade using hard broken granite coarse aggregate with the nominal maximum size of 20 mm weigh batchng the ingredients and mixing to approved mixers (to produce concrete of the specified characteristic strength of 20 N/mm2 at 28 days) including dewatering the placement site by bailing / pumping wherever necessary, laying the concrete in layers of not exceeding 15 cm thick and in bays, compacting, watering, curing, finishing the surface with all leads and lifts so as to attain the profile and strength as specified in the approved drawing and specification for various depth and height below and above ground level etc., complete complying with standard specification and as directed by the departmental officers. Without Vibration