Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance SECTOR 5 PLOT NO 221 22 NANAK NAGAR JAMMU | JAMMU | JAMMU AND KASHMIR | 180001 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹9.4 L
EMD Value
₹19,000
Closing Date
1 Feb 2020, 4:00 pmClosed
Project Engineer, SICOP Gangyal Jammu
Project Engineer, SICOP Gangyal Jammu
Construction of Chawki Rearing Centre at Talab Tillo Jammu.
2020_SICOP_90640_1
SICOP/DEV/58 Dated 17.01.2020
Open Tender
Civil Works
Item Rate
90 days
Chawki Rearing Centre Talab Tillo Jammu.
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,500
Yes
0116020100000226, IFSC Code JAKA0GNGYAL
₹19,000
Yes
6 Feb 2020
18 Jan 2020
3 Feb 2020
18 Jan 2020
1 Feb 2020
18 Jan 2020
Amount
Earth work in excavation by manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centring, shuttering and finishing. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Crushed
Providing and laying damp-proof course 50 rnm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) Crushed
Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 coarse sand) upto super structure
Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stoneaggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
Centring and shuttermg including strutting, propping etc. and removal of form for
Foundations: footings, bases of columns etc. for mass concrete.
Lintels, beams, plinth beams, girders, bressumers and centilevers.
Suspended floors, roofs, landings, balconies and access platform
Edges of slabs and breaks in floors and walls Under 20cms wide
12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand)
6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand)
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer
Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade/ colour complete as per manufacturer's specifications Two or more coats on new work
Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/10 sqm over and including base Coat of water proofing cement paint applied @ 2.20kg/10 sqm)
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood
Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size.
Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood
Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
Providing and laying vitrified floor double charge tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm
Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.
Disposal of excavated earth from site to outside municipal limits incl. loading and unloading complete job
Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings 1/C fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (Concealed work including cutting chases and making good the walls etc.)
15mm nominal outer dia pipes.
20mm nominal outer dia pipes.
Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes havmg thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this included jointing of pipe and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-charge. (External work)
20mm nominal outer dia pipes.
25mm nominal outer dia pipes.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license] C.P. BRASS FITTINGS
Providing and laying PVC pipes with all fittings including laying in position cement concrete 1:3:6 for fixing PVC pipes complete job
75 mm dia
110 mm dia
Providing and fixing PVC rain water pipes including all fittings complete job 110 mm dia
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix ( 1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design inside size 60 x60 cm and 45 cm deep including CI cover with frame complete job
Providing and fixing PVC floor trap complete job
Providing and fixing of following CP fittings complete job
CP bras bib cock
CP brass angle valve
Towel Ring
Soap dish holder
Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C.I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipaldesign complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x41 Ox265mm sizes respectively.
Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing uplasticised PVC connection pipe with brass unions 20 mm nominal bore
Providing and fixing of looking mirror of size 450mm x 600mm
Providing and fixing kitchen sink with C. I. brackets, C.P brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm
Wiring for light point/fan point/exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with Modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sqmm FRLs PVC insulated copper conductor single core cable etc as required (ISI)
Wiring for light / power plug with 2 x 4 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit long with 1 no. 4.00 sqmm FRLs PVC insulated copper conductor single core cable for loop earhting (ISI)
Wiring for Circuit/ Submain wiring along with earthiwire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required (ISI)
2 x 2.5 sqmm + 1 x 2.5 sqmm earthwire
2 x 6.00 sqmm + 1 x 6.00 sqmm earthwire
Supplying and fixing of brass batten/ angle holder including connections etc as required (ISI)
Supplying and fixing suitable GI Box with (1.32) modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 and 15/6 A modular socket outlet and 15/16 A modular switch connections etc as required (ISI)
Supplying and fixing suitable GI Box with (1.31) modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 15/16 A modular switch connections etc as required (ISI)
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate, switch box including connections but excluding modular plate etc as required (ISI)
Supplying and fixing 5 A to 32 A rating, 240/415V 10 KA 'C' curve, miniautre circuit breaker, suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioing etc as required (ISI)
Single pole
Double pole (32 A)
Supplying, installation, testing and commissioning of ceiling fan 1200 mm including wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc (Make: Standard Havells/ Crompton Greeves/ Usha)
Supplying, installation, testing and commissioning of wall fan 400 mm sweep (Make: Standard Havells / Crompton Greeves/ Usha)
Supplying and fixing following way, single pole and neutral sheet, MCB distribution board, 240 V on surface/recess, complete with finned copper bus bar neutral busbar earth bar, inter connections powder coated including earthing etc as required (ISI) 12 way double door
SITC of 7 wall LED bulb on existing angle holder including PVC round sheets (Make: Panasonic/ Havells / Syska)
SITC of fire extenguisher ABC dry powder 6 kg (Make: Savemax / Lifeguard / Carefree)
Installation, tesing and commissioning of pre wired flourescent feeling / compact flourescent filling of all types complete with all accessories and tubes etc directly on ceiling /wall including connections with 1.5 sqmm FRLS PVC insulated copper conductor single core cable and earthing etc as required LED light 4' long 18 watt (Make: Havells/ Jaquar/ Greatwhite)
Providing and fixing of MS Stair
MANIK SHARMA
KUNAL SHARMA
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .