C/o Govt ITI building at Koti Distt Chamba

Amount

Excavation work by mechanical means (hudraulic excavator)/ manual in all height and depths and in all kind of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rocks, chiseling/ wedging out of rock (where blasting is prohibited) and their intermediate classification of soil , setting out true to the required line, grades, width, cutting and trimming of side slopes as shown in the drawing and if water is met with in the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailling out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-Charge and disposal all surplus excavated soil in acquired width or at an approved dumping site including its stacking leveling dressing including all lead and lifts by head load, mechnical transportation or by any oyher mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HP PWD specification. Any loss to the public/ private property during the course of execution and disposal of unserviceble meterial shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Excavation in foundation and trenches in all heights and depths and in all kind of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling/ wedging out of rock (where blasting is prohibited) and their intermediate classification of soil , setting out true to the required line, grades, width, cutting and trimming of side slopes as shown in the drawing and if water is met with in the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailling out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-Charge and disposal all surplus excavated soil in acquired width or at an approved dumping site including its stacking leveling dressing including all lead and lifts by head load, mechnical transportation or by any oyher mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HP PWD specification. Any loss to the public/ private property during the course of execution and disposal of unserviceble meterial shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying in position mechanically mixed and vibrated cement concrete of specified grade excluding the cost of centring and shuttering in all work upto plinth level with cement concrete 1:4:8 (one cement isto four sand isto eight graded stone aggregate 40mm (forty millimetre) nominal size) and curing complete as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in foundation footing, bases of columns in all height/ depth as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in lintel, beams, plinth beams, girders, bressumers and cantilevers in all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in column, pillars, piers, abutments, posts and struts in all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in suspended floors, roofs, landings, balconies and access platform in all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in stairs (excluding landing) except spiral staircase in all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in shelves (cast in situ) in all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in edges of slab and breaks in floor and walls under 20cm. (twenty centimetres) wide in all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in walls any thickness including attached pilasters, buttresses, plinth and string course etc. in all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in weather shade, chhajjas, corbels etc. including edges in all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and laying in position machine batched and machine mixed and vibrated cement concrete design mix with minimum compressive strength of grade M-25 (M-twenty five) for reinforced cement concrete work using cement contents not less then 360 kg/m3 (three hundred sixty kilogram per cubic metre) as per appropved design mix in all work upto floor all level including pumping of concrete to site of laying but excluding cost of centring, shuttering, finishing and reinforcement including curing complete and admixtures in recommended proportion as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated cement concrete in retaining walls, return walls, wall any thickness including pilaster, columns, piers, abutment, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain wiondow sills, fillets, sunken floor etc. upto floor all level excluding the cost of centring shuttering and finishing with cement concrete 1:5:10 (one cement isto five coarse sand (Zone-III) isto ten graded stone aggregate 40mm (forty millimetre) nominal size) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength 20 N/mm2 square (twenty Newton per millimetre square) with cement contents not less than 320 Kg/m3 (three hundred twenty kilogram per cubic metre) mechanicaly mixed , vibrated and curing complete excluding cost of form work and reinforcement in columns, pillars,posts and struts above plinth level including carriage of material within all leads, lifts and other incidentals and as per the direction of the Engineer-in-charge. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying tor steel reinforcement of Tata/Tiscon/Sail for reinforced cement concrete work including bending, binding, cutting, Straightening and placing in position including cost of binding wire complete upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing Coursed rubble masonry (first sort) with hard stones in foundation and plinth with cement mortar 1:6 (one cement isto six coarse sand) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and laying in position mechanically mixed and vibrated plain cement concrete of specified grade excluding the cost of centring and shuttering in all work upto plinth level with cement concrete 1:3:6 (one cement isto three sand isto six graded stone aggregate 40mm (forty millimetre) nominal size) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and laying in position mechanically mixed and vibrated cement concrete of specified grade excluding the cost of centring and shuttering in all work upto plinth level with 1: 2:4 (one cement isto two sand isto four graded stone aggregate 40mm (forty millimetre) nominal size) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and laying in position mechanically mixed and vibrated cement concrete of specified grade excluding the cost of centring and shuttering in all work upto plinth level with 1: 2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimetre) nominal size) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Boulder filling dry hand packed tightly in floor as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Supplying and filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Back filling with granular material behind abutments, return walls, wing walls and retaining walls complete as per drawings and MORD technical specification clause 1204.3.8 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royalty ,Malkana, toll tax, sales tax or any other taxes imposed by the Government.

Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 and as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of the octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal five) in foundation and plinth in cement mortar 1:6 (one cement isto six coarse sand) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal five) in foundation and plinth in cement mortar 1:4 (one cement isto four coarse sand) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal five) in super structure above plinth level upto floor all level in cement mortar 1:4 (one cement isto four coarse sand) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal five) in super structure above plinth level upto floor all level in cement mortar 1:6 (one cement isto six coarse sand) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal five) in foundation and plinth in cement mortar 1:4 (one cement isto four coarse sand) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal five) in super structure above plinth level upto floor all levelin cement mortar 1:4 (one cement isto four coarse sand) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and laying in position damp proof course 100mm (one hundred millimetre) thick with cement concrete 1: 2:4 (one cement isto two sand isto four graded stone aggregate 12.5mm (twelve decimal five millimetre) nominal size) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7Kg. (one decimal seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Constructing cast in situ RCC diaphragm wall by providing and laying machine batched, machine mixed, self compacting ready mix reinforced cement concrete, tramie controlled of M-30 grade using minimum 400 Kg. (four hundred kilogram) cement per cubic metre of concrete including providing and mixing required admixture in recommended proportion as per IS: 9103 as approved by the Engineer-in-Charge for achieving 150-200 mm slump for diaphragm wall hgaving thickness as per approved structural design not exceeding 600mm (six hundred millimetre), in pannels of reqire depth and length as per approved drawing including constructing necessary guide wall as required and as specified including boring in all kinds of soil and rocks including working in or under water and/ or liquid mud, in foul conditions and pumping or bailing out water and removing slush, including disposal of earth / rock / slush etc. for all leads and all lifts including preparing, providing and re-circulating bentonite slurry in the trench as and when required for all depth including agitating bentinite slurry during tyrenching etc. providing and fixing stop ends or form tube including providing recess for bearing plates and fixing insert boxes for inclined rock anchor etc. complete as per specification and approved design as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing oxidized M.S. hooks and eyes 250mm(two hundred fifty millimetre) size as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing hoisting and fixing above plinth level upto floor five level precast reinforced cement concrete in moulding as in cornices, window sills, etc. including setting in cement mortar 1:3 (one cement isto three coarse sand) cost of required centring shuttering but excluding the cost of reinforcement with 1:1.5:3 ( one cement isto one decimal five coarse sand isto three graded stone aggregate 20mm (twenty millimetre) nominal size) as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing MS channel frame for doors, windows and ventilators double rebate of mild steel angle section of size 75x 40x 4 mm (seventy five into forty into four millimetre) , joints mittred and welded by angle iron 75x 4 mm (seventy five into four millimetre) Mild steel flat flat pieces to the existing T- iron frame or to the wall with dash fastener including fixing of butt hinges and screws and applying a priming coat of approved steel primer all complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing angle iron frame for doors, windows and ventilators of mild steel angle section of size 35x35x5 mm (thirty five into thirty five into five millimetre) joints mittred and welded by angle iron 35x35x5 mm (thirty five into thirty five into five millimetre) and 35x5 mm (thirty five into five millimetre) flat pieces to the existing T- iron frame or to the wall with dash fastener including fixing of butt hinges and screws and applying a priming coat of approved steel primer all completeas per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing ISI marked flush door shutter conforming to IS: 2202 (Part-I) non decorative type, core of block board construction with frame of first class hard wood and well matched commercial 3 ply veneering with verticle grains or cross bands and face veneers on both faces of shutter. 35mm (thirty five millimetre) thick including ISI marked stainless steel butt hinges with necessary screws as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators shutters, side/ to/ centre hung or fixed with beading and all members such as F7D, F4B, K 11 B and K 12 B Z-section etc. complete of standard rolled steel section, joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fixing of hinges, pivots including priming coat of approved steel primer but excluding the cost of other fittings, complete all as per the approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3mm 9fifteen into five millimetre) lugs 10 cm. (ten centimetre) long embedded in cement concrete block 15x10x10 cm. of cement concrete 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm 9twenty millimetre) nominal size) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Supplying and fixing of 5.5 mm (five point millimetre) thick glass panes of modiguard/saint/Gobain with putty and nails wherever necessary as per specifications, approved drawing, design including carriage of material within all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing fly proof wire gauge to windows, clerestory windows and doors with MS flat 15x3 mm (fifteen into three millimetre) and nuts and bolts complete. Galvanized MS wire gauge with 0.63mm (zero decimal six three) dia wire and 1.4mm (one decimal four millimetre) aperture on both sides as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing factory made PVC door frame single rebate of any clours of size 50 x 47 mm (Five Zero into Four Seven millimetre)with a well Thickness of 5 mm(Five Millimetre) Made out of estruded 5 mm (Five Millimeter) rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Nos (Two). of 150 (One Five Zero Millimetr) mm long brackes of 15 mm x 15mm (Fifteen Millimetr into Fifteen millimetre)M.S. square tube, the vertical door profiles to be reinforced with 19mm x 19 mm (Ninteen Millimeter Into Ninteen Millimetre)M.S. square tube of 19 gauge (One Nine) EPDM rubber gasket weather seal to be provided throughout the frame i/c fixing of door frame to wall with M.S. screws 100 long with wooden or rawl plugs emedded in masonary completeb as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing frosted glass panes 4mm (four millimetre) thick instead of ordinary float glass panes 4mm (four millimetre) thick in doors, windows and clerestory window shutters (Area of opening for glass panes excluding portion inside rebate shall be measured) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing 40mm (forty millimetre) thick panelled and glazed shutter of first class deodar wood for doors having 12mm (twelvr millimetre) thick both sides prelaminated water proof partical board infill panel of Action/ Tesa/ century/ Kitlam below lock rail with 6mm thick glass glazing of Modigaurd above lock rail including black enamelled iron butt hinges with necessary screws , windows and clerestorey windows (area of opening for panels inserts excluding portion inside grooves or rebates to be measured) all complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and Fixing to existing door frames, 30 mm (Three Zero millimetre) thick factory made PVC [panelled door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm (one nine Millimeter into one nine Millimetre) for styles and 15 mm x 15mm (Fifteen Millimetre into Fifteen Millimetre) for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5 mm thick heat moulded PVC "C" channel of size 30mm, thickness, 70 mm (Seventy millimetre) width out of which 50 mm shall be flate and 20 mm(Two Zero millimetre) shall be tappred in 45 (Forty Five ) degree angle on either side forming style and 5 mm thick, 95 mm wide, PVC sheet out of which 75 mm (Seventy Five Millimetre) shall be flate and 20 mm(Two Zero millimetre) shall be tapered in 45(Forty Five degree on the inner side to form top and bottom rail and 115 mm (One Hundred Fifteen Millimetre) wide PVC sheet out of which 75 mm (Seventy Five Millimetre) shall be flate and 20mm (Two Zero millimetre) shall be tappred on both side to form lock rail, top , bottom, and lock rail shall be provided either side of the panel 10 mm thick (ten millimetre), 20 mm (Two Zero millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side. PVC Sheet to be fitted in M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent Cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90 mm size( One Zero Zero into Five Zero into One Point Nine Zero) with necessary screw etc. complete.as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing 19mm (ninteen millimetre) thick water proof commercial board of Century/ Kitply/ Century ply/ Duro ply/ Morino ISI marked No. 1659 for cup board box including shelves and shutter. The back side of cup board/ cabinet shall have 6mm (six millimetre) thick water proof ply and all cut portion of the board shall have 6/12 mm thick hard wood edging and shutter from outer side to be finished with one millimetre thick mica lamination of approved shade including fixing with nickle plated piano hinges with screws etc. complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing 40x5mm flat iron hold fast 40cm. (forty centimetre) long including fixing to frame with 10mm (ten millimetre) diametre bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm. of 1:3:6 mix (one cement isto three coarse sand isto six graded stone aggregate 20mm (twenty millimetre) nominal size) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing mild steel grill of required pattern in wooden frames of windows etc.with mild steel flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to steel windows by welding as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing aluminium tower bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

i). 250x10 mm (two hundred fifty into ten millimetre).

ii). 150x10m (one hundred fifty into ten millimetre).

Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 125mm (one hundred twenty five millimetre) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing aluminium sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 300x16 mm (three hundred into sixteen millimetre) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing aluminium hanging door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin rubber stopper as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 250mm (two hundred fifty millimetre) weighing not less than 150 gms. (one hundred fifty grams) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing ISI marked oxidised M.S. single acting spring hinge with necessary screws etc. complete. 150mm (one hundred fifty millimetre) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS: 4992 with necessary screws etc. complete 125mm (one hundred twenty five millimetre) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing stainless steel curtain rods and brackets etc. complete as per specification and approved drawing complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing M.S. fan clamps type- I or II of 16 mm (sixteen millimetre) dia M.S. bar bent to shape with hooked ends in R.C.C. slab or beams during laying including painting the exposed portion of loop, all as per standard design complete.as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing 1200x2400mm (one thousand two hundred into two thousand four hundred millimetre) readymade Black/ Green board of Landmart/ Promark made of steel of thickness 0.30 t0 0.40 mm (zero decimal three to zero decimal four millimetre) and have vitreous enamel coating of 0.095 mm minimum thickness on top and 0.3mm (zero decimal three millimetre) on the back side. The top shall be free from waveness and shall show excellent erasability. The core material shall be 9mm (nine millimetre) thick board having bulk density of 76Kg. (seventy six kilogram) per cubic metre and grade as per IS: 212406-03 edition 2.2. The backing material sheet shall be fixed on wall with specially designed clamps and clamping with help of readymade sleaves and screws as per requirement as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

20 mm ( twenty millimetre) thick cement plaster in single coat on the rough side of brick /concrete/stone / walls for interior plastering upto floor all level including arrises internal rounded angles, chamfers or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement isto six sand) upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

20 mm ( twenty millimetre) thick cement plaster in single coat on the rough side of brick /concrete/stone / walls for interior plastering upto floor all level including arrises internal rounded angles, chamfers or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:4 ( one cement isto four sand) upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm ( fifteen millimetre) thick cement plaster in single coat on the fair side of brick /concrete/stone / walls for interior plastering upto floor all level including arrises internal rounded angles, chamfers or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement isto six sand) upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

6 mm thick (six millimetre) cement plaster to ceiling in cement mortar 1:3 ( one cement isto three sand ) upto all floors level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

12mm thick cement mortar bands in cement mortar 1:4 (one cement isto four coarse sand) and curing complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Mild Steel pipe 100 mm (one hundred millimetre) dia including welding and providing red lead priming coat complete as per drawing and specifications complete in all respect as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up section joints chanels, angles,tees frame work for ceiling/ flush ceiling flats with connection plates or angles, cleats as in trusses, trussed purlins main and cross beam, hip jack rafter, purlins connected to common rafter and the like of Tata/Sail in building including cutting, framing lifting hoisting and placing in position complete and applying a coat of read lead paint including framed work with angles, tees 40X6 (forty into six millimetre) including entire carriage of material with in all leads and lift. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing Mild steel round (TATA /SAIL) holding down or anchor bolts with nuts and washers plates complete up to any floor level and as per the direction of Engineer-in-Charge with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Steel work (TATA /SAIL) welded in built up sections, trusses and framed work including cutting, hoisting, fixing lifting and placing in position and applying a priming coat of red lead paint In grating, framed guard, chanel, angle, bars ladders, railing brackets and similar works complete up to any floor level and as per the direction of Engineer-in-Charge with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.

Providing and fixing M.S. BP Sheet 2 mm ( two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimetre) dia SST pipe hand rail fixed with 35mm (thirty five millimetre) dia SST pipe in combination and 15/20mm SST pipe balusters including welding, grinding, battering, positioning and making curvature wherever required and filling the same with necessary stanless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fastners with suitable arrangment as per approved drawing, design and specifications as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero decimal six millimetre) thick prepainted sheets of TATA Duro shine/ Reliance/ Jindal in roofing over steel trusses of coloured materials or equivalent prepainted single skin trapezoidal profiled sheeting 0.60 (zero decimal six) millimetre thickness having 1060mm (one thousand sixty millimetre) cover width over all width 1126mm, 28mm crest depth at 353+/- 2 c/c crest distance having two ribs at the centre for stiffering having crest depth of 2.5mm (two decimal five millimetre) the main crest width at top 25mm (twenty five millimetre) and at lower 81mm base metal of cold rubed sheet oil with zinc coated top coat with regular modified polyster coating of approved shade and blancing reverse coat with polister paint and shall be fixed with self drilling and self tapping screws of 5.5mm (five decimal five millimetre) dia and 55mm (fifty five millimetre) long with EPDM seal. The material supplies will be accompanied with text certificates and 20 years warranty against corrossion ,fading of colour and manufacutring defect from the company as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing TATA Duro shine/ Reliance/ Jindal steel valleys 90cm. (ninety centimetre) overall with 0.60mm (zero decimal six millimetre) thick prepainted galavnised sheets with hot dipped metalic zinc coated sheets with top coat of regular modified polyster( RMP) organic coat 20mm microns over 5 microns pruner and back coat of polister of 5 microns over 5 microns priming coating shhet fixed with self drilling and self tapping screw of 5.5mm 9five decimal five millimetre) dia and 55 mm (fifty five millimetre) long with EPDM seal. The material supplies will be accompanied with text certificates and 20 years warranty against corrossion ,fading of colour and manufacutring defects from the company as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm over of 0.60mm (zero decimal six millimetre) thick prepainted steel sheet ridge (factory made) with hot dip metalic zinc coated sheets with top coat of regular modified polyster( RMP) organic coat 20mm microns over 5 microns pruner and back coat of polister of 5 microns over 5 microns priming coating sheet fixed with self drilling and self tapping screw of 5.5mm (five decimal five millimetre) dia. The material supplies will be accompanied with text certificates and 20 years warranty against corrossion ,fading of colour and manufacutring defects from the company as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 30cm. (thirty centimetre) wide and 30cm. (thirty centimetre) deep 0.60mm (zero decimal six millimetre) thick plain G.I. sheet gutter o TATA Duro shine/ SAIL, gutter fixed with bolts, nuts and washers etc. including making necessary connections with rain water pipe complete as per design, drawings and specifications complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x600mm (six hundred into six hundred millimetre) ACP Panel/ Everest fibre cement bonded ceiling tiles ceiling at all height including providing and fixing of frame work made of special section, power pressed from MS sheet and galvanised with zinc coating of 120 gms. (one hundred tqenty grams) per square metre (both side inclusive) as per IS: 277 and consisting of angle cleat of size 25mm wide x 1.6mm hick with flanges of 27mm (twenty seven millimetre) and 37mm (thirty seven millimetre) at 1200mm (twelve hundred millimetre) centre to centre one flange fixed to the ceiling with dash fastner 12.5mm dia x50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate GI channel 45x15x0.90 mm (forty five into fifteen into zero decimal nine millimetre) running at the spacing of 1200mm c/c to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm at 450mm c/c shall be fixed in a dorection perpendicular to G.I. immediate channel with connecting clip made out of 2.64mm dia x 230mm long GI wire at every junction including fixing perimeter channel 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimetre of ceiling fixed to wall/ pertition with the help of rawl plugs 450mm centre, with 25mm long dry wall screws at 230mm interval, including fixing of clcium silicate board to ceiling section and perimeter channel with the help of dry wall of size 3.5 x 25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tap finishing with jointing compound in three layers covering upto 150mm (one hundred fifty millimetre) on both side of joints and two coat of primer suitable for boards, all as per manufacture's specifications and also including the cost of making opening for light fitting, grills, diffusers, cut outs made with frame of perimetre channel suitably fixed all complete as per drawing, specification and directions of Engineer-in-Charge but excluding the cost of painting with 18mm thick calcium silicate board made with calcareous siliceous material reinforced with cellolose fiber manufactured through autoclaving process as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing tiled false ceiling of specified material of size 595x595 mm (five hundred ninety five into five hundred ninety five millimetre) in true horizontal level, suspended on interlocking metal grid of dipped galvanised steel sections (galvanizes at the rate 120 gms (one hundred twenty grams) per square metre , both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30mm thick (minimum) sheet spaced at 1200mm c/c and cross T of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 24x25 mm made from 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panels to form grid of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including required cutting/ making opening for services like diffusers grills, ligth fitting, fixtures, smoke detectors etc. Main T runner to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5mm dia and 50mm long dash fastners, 4mm (four millimetre) GI adjustable rod with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200 mm (twelve hundred millimetre) centre to centre along main T, bottom exposed width of 24mm of all T sections shall be prepainted with polyester paint all complete for all height as per specifications, drawings and as directed by Engineer-in-Charge. 1.8mm (one decimal eight millimetre) thick fully perforated calcium silicate board made with calceous and siliceous material reinforced with cellolose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 Kg. per sq cm. bending strength 100 Kg. per square centimetre of size 595x595 mm (five hundred ninety five into five hundred ninety five millimetre) having perforation of dia 10mm with minimum perforated area 18% with non wooven tissue on the back side having an NRC (Noise reduction coefficient) of 0.85, with 50mm thick rockwool of 48Kg. per cum. backing as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Kota stone 55x55/ 55x27.5 cm. (fifty five into fifty five oblique fifty five into twenty seven decimal five centimetre) with 7.5 cm. (seven decimal five centimetre) wide Jaisalmer Yellow bond as per detail, slab flooring over 20mm (twenty millimetre) average thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (one cement isto four coarse sand). 25mm (twenty five millimetre) thick as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Kota stone slab 20mm (twenty millimetre) thick in riser of steps, skirting, dado and pillars laid on 12mm (twelve millimetre) average thick cement mortar 1:3 (one cement isto three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x600mm (six hundred into six hundred millimetre) double charged / Ultra charged vitrified floor tiles of NITCO/ RAK/ Kajaria/ Johnson as per approved shade (thickness to be specified by the manufacturer) with water absorption less than 0.08% and coforming to IS: 15622 of approved make in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement isto four coarse sand) jointing with grey cement slurry at the rate 3.3 Kg./ sqm. (three decimal three kilogram per square metre including grouting the joints with white cement and matched pigments etc. complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x600mm (six hundred into six hundred millimetre) double charged / Ultra charged vitrified floor tiles of NITCO/ RAK/ Kajaria/ Johnson as per approved shade vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and coforming to IS: 15622 of approved make in all colours and shades, in skirting riser of steps over 12mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement isto three coarse sand) jointing with grey cement slurry at the rate 3.3 Kg./ sqm. (three decimal three kilogram per square metre including grouting the joints with white cement and matched pigments etc. complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 2mm thick PVC antistatic venyl flooring of 2G/ Vista / Wadafloor/ Action Tesa/ Marino over cement concrete flooring , plain or coloured carbed or mosaic / metalled finish laid with approved adhesive on sub floor (damp proofing treatment to be paid for separately) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Precast terrazo tile 300x300x25mm (three hundred into three hundred into twenty five millimetre) automatic hydraulically compressed and polished ISIS marked No. IS 1237 and 501 in White, Yellow, Green, Maroon chips of o and B size of NTC 22mm (twenty two millimetre) thick with graded marble chips laid in floor and landing, jointed with neat cement sluury mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20mm thick bed of cement mortar 1:4 (one cement isto four coarse sand). Medium shade pigment using 50% white cement and 50% ordinary cement as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Precast terrazo 300x300x25 mm (three hundred into three hundred into twenty five millimetre) automatic hydraulically compressed tile 22mm (twenty two millimetre) thick with graded marble chips of size upto 12mm (twelvr millimetre) , in skirting and riser of steps not exceeding 30 cm. (thirty centimetre) in height on 12mm (twelve millimetre) thick cement plaster 1:3 (one cement isto three coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with tiles of medium shade pigment using 50% white cement and 50% ordinary cement as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying antiskid ceremic floor tiles of size 300x300 mm (three hundred into three hundred millimetre) of NITCO/ Kajaria/ Somani/ Bell /Johnson of 1st quality conforming to IS: 15622 of approved make in all colours, shades, except white, ivory, grey, fume red brown, laid on 20mm (twenty millimetre) thick bed of cement mortar 1:4 (one cement isto four coarse sand) jointed with grey cement slurry at the rate 3.3Kg. (three decimal three kilogram) per square metre including pointing the joints with white cement and matching pigments etc. complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 300x300mm (three hundred into three hundred millimetre) ceremic glazed floor tiles Kajaria/ NITCO/ Bell / Johnson dado upto 205cm. (two hundred five centimetre) height conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades, except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dado over 12mm thick bed of cement mortar 1: 3 (1 cement : 3 coarse sand), and jointing with grey cement slurry at the rate 3.3Kg. per sqm. including pointing in white cement mixed with pigment of matching shade complete. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying polished granite stone flooring Grey/ black with round nosing in required design and pattern in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (one cement isto four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixture with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. Polished granite stone slab jet black, cherry red, Elite brown, cat eye or equivalent. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Precast terrazo 300x300x25 mm (three hundred into three hundred into twenty five millimetre) Labrador design Rainbow series of NTC flooring 40mm (forty millimetre) average thickness on 20 mm (twenty millimetre) thick base of cement mortar 1:4 (one cement isto four coarse sand) over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing the granite for finishing complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and Laying 20mm(Twenty Millimetre) cement concrate topping 1:2 to 3 stone aggregate of size 4.75 mm (Four Point Seven Five Millimetre )and below, by volume) laid over and finished monolithic with base concrate as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing stainless steel pipe 50mm (fifty millimetre) dia fixed to the wall in block of cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20mm (twenty millimetre) nominal size ) complete as per drawing and specifications and as per directions of the Engineer-in-charge al complete. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles with necessary screws etc. complete 125mm (one hundred twenty five millimetre) size as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing magnetic catcher of approved quality in cupboard/ wardrobe shutters including fixing with necessary screws etc. complete. Double strip (horizontal type) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing M.S. piano hinges ISI marked IS: 3818 finished with nickle plating and fixing with necessary screws etc. complete. Double strip (horizontal type). Overall width 35mm (thirty five millimetre) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimetre) bright finished cup board or wardrobe knob of approved quality with necessary screws. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing rolling shutter of approved make, made of required size MS lath, interlocked together through their entire length and jointed together at the end by end lock mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm. (twenty seven decmal five centimetre) longwire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part-1 and MS top cover of required thickness for rolling shutters 80x1.25 mm (eighty into one decimal two five millimetre) M.S. lath with 1.25 mm (one decimal two five millimetre) thick top cover. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing ball bearings for rolling shutters.as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face unplasticised rigid PVC rain water pipe conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion. Single socketed pipe 150mm (one hundred fifty millimetre) dia as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face unplasticised PVC moulded fitting / accessories for unplasticised rigid PVC rain water pipe conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion. Bend 87.5 degree 150 mm (one hundred fifty millimetre) dia bend as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing MS holder bats clamps of approved design to rain water pipes embeded in and including cement concrete blocks of 10x10x10 cm. (ten into ten into ten centimetre) of 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate 20mm (twenty millimetre) nominal size) including cost of cutting holes and making good the walls etc. for 150mm (one hundred fifty millimetre) dia pipe as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and appying white cement based putty of average thickness 1mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing walls with 100% premium acrylic emulsion paint having VOC less than 50 gm per litre and UV resistance as per IS: 15489 :2004. Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives. New work two or more coats applied at the rate 1.43 (one decimal four three) litre per 10 sqm. (ten square metre) over and including priming coat of exterior primer applied at the rate 0.90 (zero decimal nine) litre per 10 sqm. (ten square metre) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Wall painting with acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 gms (fifty grams) per litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour two coats as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wall acoustic panel of size 600x1200x25 mm (six hundred into twelve hundred into twenty five millimetre) for sound observer procured from the approved manufacturer and fixed as per required guidelines complete in all respect as per drawing and specifications and as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering with dry distemper of approved brand and manufacture two or more coats of required shade on new work over and including applying the water thinnable priming coat to give an even shade as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Wall painting with premium acrylic emulsion paint of interior grade having VOC (Volatile Organic Compound) content less than 50 gms (fifty grams) per litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour two coats as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing plinth protection with 40mm (forty millimetre) thick interlocking paver block of NTC with 23 cm. (twenty three centimetre) dia half round RCC pipe for drainage purpose fixed over cement concrete 1:4:8 (one cement isto four coarse sand isto eight graded stone aggregate 40mm (forty millimetre) nominal size bedding of pipe as per architectural drawings, design and specifications as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying heavy duty cement concrete interlocking paver blocks 60mm (sixty millimetre) of NTC Vibro compacted upto M-50 9M- fifty) grade including border or kerb block grey or coloured over sub base of concrete with 25mm (twenty five millimetre) thick, average thickness of cement mortar 1:4 (one cement isto four coarse sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing, rubbing and polishing complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position mechanically mixed and vibrated cement concrete of specified grade excluding the cost of centring and shuttering in all work upto plinth level with cement concrete 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimetre) nominal size) as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coat with ready mixed of approved shade primer of approved brand and manufacture on resinous wood and plywood. as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying two coats of fire retardant paint on cleaned wood / ply surface at the rate 3.5 sqm. (three decimal five millimetre) per litre per coat including preparation of base surfaceas per recmmendations of manufacturer to make the surface fire retardant.as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Painting steel work with Deluxe multi surface paint to give an even shade two or more coats applied at the rate 0.90 ltr. (zero decimal nine litre) per 10 sqm. (ten square metre) over an under coat of primer applied at the rate 0.80 (zero decimal eight) litre per 10 sqm. (ten square metre) of approved brand and manufacture. as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing walls with two or more coats of weather proof exterior grade emulsion of approved shade at the rate of 1.67 ltr. (one decimal six seven litres) per 10 sqm. (ten square metre) over and including priming coat of exterior primer applied at the rate 2.20 Kg. (two decimal two kilogram) per 10 sqm. (ten square metre) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing EWC of item S. No. 200871 IS: 101 of size 57x35x39 cm. (fifty seven into thirty five into thirty nine centimetre) of Hindware/ Cera/ Jaquar of star white or snow white shade pedastal type water closet (European type) with seat and lid, 10 ltr. (ten litres) low level white vitreous china flushing cistern and C.P. flush bend with fitting and CI brackets, 40mm (forty millimetre) flush bend , overflow arrangment with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fitting and brackets , cutting and making good the wall and floor wherever required with ISI marked matching shade plastic seat and cover complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm (one hundred millimetre) sand cast iron Por S trap, 10 (ten) litres low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS: 7231 with all fitting and fixtures complete including cutting and making good the walls and floor wherever required. White vitreous china Orissa pattern WC pan No. 2071 of size 580x440mm (five hundred eighty into four hundred forty millimetre) of Hinware/ Cera/ Jaquar with integral type foot rests as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing EWC of item S. No. 200871 IS: 101 of size 57x35x39 cm. (fifty seven into thirty five into thirty nine centimetre) of Hindware/ Cera/ Jaquar of star white or snow white shade pedastal type water closet (European type Matrix) with seat and lid, 10 ltr. (ten litres) low level white vitreous china flushing cistern and C.P. flush bend with fitting and CI brackets, 40mm (forty millimetre) flush bend , overflow arrangment with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fitting and brackets , cutting and making good the wall and floor wherever required with ISI marked matching shade plastic seat and cover complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china urinal large flat back No. 60002 of size 39x37x5x5 centimetre of Hinware/ Cera/ Jaquar of snow white shade with white PVC automatic flushing cistern, with fitting standard size C.P. brass flush pipe, spreaders with union and clamps (all in C.P.) brass with waste fitting as per IS: 2556, CI trap with outlet grating and other coupling in C.P. brass incuding painting of fitting and cutting and making good the vwalls and floor whever required. Single half urinal with 5 (five) litre PVC automatic flushing cistern as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin of Delta No. 10010 without pedastal of Hindware/ Cera/ Jaquar with CI bracket, 15mm (fifteen millimetre) CP brass pillar tap, 32mm (thirty two millimetre) CP brass waste of standard pattern fitting including painting of fitting and brackets, cutting and making good the walls wherever required. White vitreous China wash basin size 550x400 mm (five hundred fifty into four hundred millimetre) with a single 15mm (fifteen millimetre) CP brass pillar tap as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin No. 10080 of Hindware/ Cera/ Jaquar with CI bracket, 15mm (fifteen millimetre) CP brass pillar tap, 32mm (thirty two millimetre) CP brass waste of standard pattern fitting including painting of fitting and brackets, cutting and making good the walls wherever required. White vitreous China wash basin size 630x450mm (six hundred thirty into four hundred fifty millimetre) with a single 15mm (fifteen millimetre) CP brass pillar tap as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin (Matrix) of Delta No. 10010 without pedastal of Hindware/ Cera/ Jaquar with CI bracket, 15mm CP brass pillar tap, 32mm CP brass waste of standard pattern fitting including painting of fitting and brackets, cutting and making good the walls wherever required. White vitreous China wash basin size 550x400mm with a single 15mm CP brass pillar tap.as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china division plate for urinal of size 600x300mm (six hundred into three hundred millimetre) with integral longitudinal flush pipe as per drawing and specifications and as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing stainless steel Kitchen sink without drain board 610x510mm (six hundred ten into five hundred ten millimetre) with bowl depth 200mm 9two hundred millimetre) ISI 304 (18/8) as per IS: 13983 with CI brackets and stainless steel plug 40mm 9forty millimetre) including painting of fitting and brackets, cutting and making good the walls wherever required. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC waste pipe of Supreme/ Finolex/ Prime for wash basin or sink including PVC waste fitting complete semi rigid pipe 32mm dia.as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600mm X 450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. towel rail of Jal/ ESS complete with brackets fixed to wooden cleat with CP brass screws with concealed fitting arrangement of approved quality and colour. 450mm (four hundred fifty millimetre) long towel rail with total length 645mm (six hundred forty five millimetre) width 78mm (seventy eight millimetre) wide and effective height of 88mm weighing not less than 170gms. (one hundred seventy grams) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. shelf of Jal/ ESS 440mm (four hundred forty millimetre) long 124mm (one hundred twenty four millimetre) width and 36mm (thirty six millimetre) height of approved quality and colour weighing not less than 300gms. (three hundred grams) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats (vitreous China) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass bib tap of series of Jaquar / Hindware/ Cera/ Jal conforming to IS: 8931 15mm 9fifteen millimetre) nominal bore. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Two hole basin mixing faucet. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 15mm (fifteen millimetre) nominal bore as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing unplasticised PVC connection pipe with brass union 15mm (fifteen millimetre) nominal bore as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

i). Providing and fixing brass full way valve with wheel 15 mm (fifteen millimetre) nominal bore.as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

ii). Providing and fixing brass full way valve with wheel 20 mm (twenty millimetre) nominal bore.as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing ball valve (brass) of approved quality High or low p[ressure with plastic floats complete. 15mm (fifteen millimetre) nominal bore as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing unplasticised rigid high pressure PVC of Supreme/ Prince/ Finolex spigot and socketed soil waste and ventilating pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete 110 mm (one hundred ten millimetre) diametre.as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing unplasticised rigid high pressure PVC of Supreme/ Prince/ Finolex spigot and socketed soil waste and ventilating pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete 75 mm (seventy five millimetre) diametre.as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

i). Providing and fixing unplasticised PVC clips of approved design to unplasticised PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm (one hundred ten millimetre) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

ii). Providing and fixing unplasticised PVC clips of approved design to unplasticised PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75mm (seventy five millimetre) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing mixer Jal/ Jaquar / ESS for kitchen sink with casted swinging spot at top as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C. P. brass toilet paper holder of Jal/ Jaquar / ESS manufacturer, continental series of Jaquar / contessa series of Hindware complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. Jet spray make of opal prince (single lever) series of Jaquar / fluid (single lever) series of Hindware / Puby series of Cera/ Hindson series of Jal with 1.5 mtr. (one decmal five metre) tube complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. .The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing brass stop cock of standard design and approved make IS: 8931, 15mm (fifteen millimetre) nominal bore complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimetre) nominal bore PVC pipe of Supreme/ Prince/ Finolex laid to level or slope conforming to IS: 13592 Type A including jointing with approved adhesive mixture complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC Supreme/ Prince/ Finolex pipe fitting and accessories for sewerage pipe conforming to IS: 14735, plain bend complete including fitting with approved adhesive complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

i). 110mm (one hundred ten millimetre) nominal bore.

ii). 75mm (seventy five millimetre) nominal bore.

Providing and fixing PVC equal tee including jointing with approved adhesive complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

1. Providing and fixing 1620 mm ( One Thousand Six Hundred Twenty Millimetre)PVC equal tee including jointing with approved adhesive complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 2025 mm (Two Thousand Twenty Five Millimeter) PVC equal tee including jointing with approved adhesive complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

2. Providing and fixing 1620 mm ( One Thousand Six Hundred Twenty Millimetre)PVC equal tee including jointing with approved adhesive complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 1625 mm PVC equal tee including jointing with approved adhesive complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

3. Providing and fixing 1620 mm ( One Thousand Six Hundred Twenty Millimetre) PVC equal tee including jointing with approved adhesive complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 2025 mm (Two Thousand Twenty Five Millimeter) PVC equal tee including jointing with approved adhesive complete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

i). Providing and fixing on wall face PVC moulded fitting/ accessories for PVC soil, waste and ventilating pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete 110 mm (one hundred ten millimetre) bend omplete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

ii). Providing and fixing on wall face PVC moulded fitting/ accessories for PVC soil, waste and ventilating pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete 75mm (seventy five millimetre) bend.omplete as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

i). Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. 110mm (one hundred ten millimetre) dia as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

ii). Providing and fixing PVC door nend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. 75mm (seventy five millimetre) dia.as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

i). Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive complete. 110mm (one hundred ten millimetre) dia as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

ii). Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive complete. 75mm (seventy five millimetre) dia as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

i). Providing and fixing PVC collar 110mm (one hundred ten millimetre) nominal diametre as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

ii). Providing and fixing PVC Co1lar 75mm (seventy five millimetre) nominal diametre as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing trap of self cleaning design with C.P iron screwed down or hinged grating without vent arm complete i/c cost of cutting holes and making good the walls and floor 100mm (One hundred millimetre) inlet and 75 mm (seventy five millimetre) outlet sand cast iron S&S as per IS:3989 as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Polythelene aluminium Polythelene PE-AL-PE composite pressure pipe conforming to IS: 15450 U.V. stabilized with carbon black having thermal stability for hot and cold water supply capable to withstand pressure upto 80 degree C including all special fitting of composite material (engineering plastic blend and brass inserts wherever required. e.g. elbow, tees, reducers, couplers, and connectors etc. with clamps at 1.00 (one) metre spacing. this includes the cost of cutting chases and including testing of joints complete. Concealed work including cutting chases and making good the wall etc. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

i). 1620 20mm (twenty millimetre) O.D. pipe.

i). 1620 25mm (twenty millimetre) O.D. pipe.

Providing and fixing G.I. pipe complete with G.I. fitting including trenching and refilling etc. external work 25mm (twenty five millimetre) dia nominal bore. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Making connection of G.I. distribution branch with G.I. main of following size by providing and fixing tee including cutting and threading the pipe etc. complete 25 to 40mm (twenty five to forty millimetre) nominal bore as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC cowl 100mm (one hundred millimetre) nominal diametre as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. grating of Jal/ ESS 100 mm (one hundred millimetre) dia as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC triple layer water storage tank of Sintex/ Plasto of 1000 litres net capacity of IS : 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (one cement isto four coarse sand) with RCC top slab with 1:1.5:3 (one cement isto one decimal five coarse sand (zone-III) isto three graded stone aggregate 20mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand isto eight graded stone aggregate 40mm (forty millimetre) nominal size), inside plastering 12mm (twelve millimetre) thick with cement mortar 1:3 (one cement isto three three coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20mm (twenty millimetre) nominal size) finished with a floating coat of neat cement as per standard design. Inside size 90x80 cm. (ninety into eighty centimetre) and 45 cm. (forty five centimetre) deep including cover with frame (light duty) 455x610 mm internal dimension , total weight of cover and frame to be not less than 58Kg. (weight of cover 43Kg. and weight of frame 15 Kg.). With common burnt clay FPS (non modular) bricks of class designation 7.5 as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (one cement isto four coarse sand) with RCC top slab with 1:1.5:3 (one cement isto one decimal five coarse sand (zone-III) isto three graded stone aggregate 20mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand isto eight graded stone aggregate 40mm (forty millimetre) nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20mm (twenty millimetre) nominal size) finished with a floating coat of neat cement as per standard design. Inside size 120x90 cm. (one hundred twenty into ninety centimetre) and 90 cm. (ninety centimetre) deep including cover with frame (light duty) 500mm diametre, total weight of cover and frame to be not less than 58Kg. (weight of cover 43Kg. and weight of frame 15 Kg.). With common burnt clay FPS (non modular) bricks of class designation 7.5 as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimetre) dia sand cast iron grating for gully trap as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing C.I. cover without frame for manhole 455x610mm rectangular cover (light duty), weight of cover not to be less than 23Kg. (twenty three kilogram) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing one HP water lifting pump (Tullu pump) of Kirloskar/ Crompton including required board and fitting of the pump complete in all respect as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

M/s Bhagwati Construction Co.