REPAIR TO STEEL FURNITURE AND CONVERSION OF CHARPOY GI PIPE NYLON NIWAR INTO PLY TOP UNDER GE SATWARI

Amount

Note: Removal of following existing unserviceable steel/wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,welding, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and painting the disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. All kind of work will be executed where the furniture exist in different User Units of GE Satwari including BSO's Furniture Yard, and office hours only as directed by Engineer-in-Charge.

Almirah small steel : FD-67(M)/243/350 /1032 3-Way locking system as per drg.

Brass lock as per existing pattern and shape. Make : Harrison/Godrej/Link

Decorative SS Handle as approved by GE irrespective of what is shown on drg.

Leg as per drg.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

S&F new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets.

S&F new door by removing the door from hinges, and refixing by replacing unserviceable hinges.

Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and application of red-oxide primer.

Almirah large steel :FD-67(M) /339 /1031 3-Way locking system for almirah large as per drg.

Brass lock as per existing pattern and shape. Make : Harrison/Godrej/Link

Handle as approved by GE irrespective of what is shown on drg.

Leg as per drg.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf,making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

S&F new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets.

S&F new door by removing the door from hinges, and refixing by replacing unserviceable hinges.

Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and application of red-oxide primer.

Bed hard : FD/E6/MAP/08(R) Taking out existing broken plywood from the bed hard by loosening the nut bolts with washers. S&F new 12 mm thick BWR grade plywood fixed to bed hard frame with new GI Nut, bolts complete all as shown on drawing and as specified. Make of plywood - Greenply/Century Ply/Archidply

Taking out existing broken head board form bed hard and fixing new head board with 18 mm thick exterior grade pre laminated MDF board both side laminated in light walnut shade or shade as approved by GE with 4mm thick teak wood beading in matching shade with new screws.

Taking out existing broken foot board form bed hard and fixing new foot board with 18 mm thick exterior grade pre laminated MDF board both side laminated in light walnut shade or shade as approved by GE with 4mm thick teak wood beading in matching shade with new screws.

Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and application of red-oxide primer.

Hard rubber shoes as per drg.

Chair writing officer's : FD/E6/MAP/12 S&F new seat made of 12mm thick BWR grade plywood over which 50 mm thick 32 density foam cushion shall be fixed with PVC lipping all round.The foam and plywood shall also be covered with best quality fabric as approved by BSO and GE irrespective of what is shown on drg.

S&F new back made of 12mm thick BWR grade plywood over which 50 mm thick 32 density foam cushion shall be fixed with pvc lipping all round.The foam and plywood shall also be covered with best qualityfabric as approved by GE irrespective of what is shown on drg.

Replacement of new arms with polyurethane reinforced with MS insert arms as shown on drgs /existing in chair.

Rubber stoper as per drawing

Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and applicationof red-oxide primer.

Table office clerk steel : FD-84 / 381 FD-1004 Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive (Fevicol SH) complete all as shown on drawing and as specified.. Make of MDF board : Century /Archid /Greenply /Actiontesa.

Legs 25 mm 16 gauge square MS pipe.

Replacement of lock of drawer as per sample kept with GE Office.

Repairs to Drawer include tinkering/denting, painting, welding, etc.

Stiffner of 25 mm 16 gauge square MS pipe.

Rubber shoes as per drg.

Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and application of red-oxide primer.

Table office officer steel : FD-84/ 1003 Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH) complete all as shown on drawing and as specified.. Make of MDF board : Century/Archid /Greenply/Actiontesa.

Legs 25 mm 16 gauge square MS pipe.

Replacement of lock of drawer as per sample kept with GE office.

Repairs to Drawer include tinkering/denting, painting, welding, etc.

Stiffner of 25 mm 16 gauge square MS pipe.

Rubber shoes as per drg.

Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and application of red-oxide primer.

Table 900x600x760 mm w/o drawer FD-1007 Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH) complete all as shown on drawing and as specified. Make of MDF board : Century/Archid /Greenply/Actiontesa.

Legs of MS Square tube of size 25mmx25mmx20 Gauge as per drg.

S&F new stiffners of size 25 mm square MS pipe.

Rubber Shoes as per drg.

Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and application of red-oxide primer.

Table 900x600x760 mm with drawer FD-83/1008 Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH) complete all as shown on drawing and as specified. Make of MDF board : Century/Archid /Greenply/Actiontesa.

Legs of MS Square tube of size 25mmx25mmx20 Gauge as per drg.

Replacement of lock of drawer, make-Harrison.

S&F new stiffners of size 25 mm square MS pipe.

Repairs to Drawer include tinkering/denting, painting, welding, etc.

Rubber Shoes as per drg.

Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and application of red-oxide primer.

Table bed side steel : FD-157, FD/E6/MAP/15 (R) Supply & fixing of new top of 18 mm thick exterior grade prelaminated MDF board of existing shade/both side laminated with light Wallnut shade or as approved by GE covered with 4 mm teak wood beading in matching shade, Supply & fixing new handle for cupboard. All steel surface shall be painted with two coats of synthetic enamel paint of existing shade after preparition of surface complete all as shown on drawing and as specified. Make of MDF board : Century/Archid /Greenply/Actiontesa.

Replace old UNSV/rusted telescopic channel for smooth functioning.

Hard rubber shoes as per drg.

Teapoy Varandah : FD/E6/MAP/17 Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH) complete all as shown on drawing and as specified. Make of MDF board : Century/Archid /Greenply/Actiontesa.

Rubber Shoes as per drg.

Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and application of red-oxide primer.

Chair verandah:- FD-19M,333,256 Spot arc welding to broken parts/joints of chairs.

Removing the existing unserviceable cane plastic from the chair and Recanning the chair with plastic cane 4mm wide, white colour, (MAT Pattern), quality as approved by GE/Engr-in-Charge.

Removing the existing unserviceable cane plastic from the chair. S&F PVC seat and back 4mm thick to the chair after providing one extra support in between seat and back of chair.The support shall be of 19mm dia MS tube duly welded horizontally seat and back as directed by BSO. The PVC seat shall be got approved from BSO/GE before supply.

S&F best quality new PVC shoes to the legs of chair.

Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and application of red-oxide primer.

Chair revolving cushioned with arm all type Replacement of pedestal assembly of chairs revolving same as shown on drgs /existing in chair.

Replacement of hydroulic hight adjustment base assembly of chairs revolving same as shown on drgs /existing in chair.

Replacement of new arms with polyurethane reinforced with MS insert arms as shown on drgs /existing in chair.

Removing the old torn/damaged tapestry cloth/rexine from the seat of the chair and providing the same with tapestry/rexine over a layer of foam(75mm thick,40 density) as shown on drgs /existing in chair. Colour 7 shade of cloth/Rexine as approved by GE.

Removing the old torn/damaged tapestry cloth/rexine from the back of the chair and providing the same with tapestry/rexine over a layer of foam(75mm thick,40 density) as shown on drgs /existing in chair. Colour & shade of cloth/Rexine as approved by GE.

Stool steel with back rest type-II HFD-2007 Seat made of 12mm thick BWR grade plywood over which 50 mm thick 32 density foam cushion shall be fixed .The foam and plywood shall also be covered with best quality fabric/rexine as approved by GE irrespective of what is shown on drg.

Back rest made of 12mm thick BWR grade plywood over which 50 mm thick 32 density foam cushion shall be fixed .The foam and plywood shall also be covered with best quality fabric/rexine as approved by GE irrespective of what is shown on drg.

Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and application of red-oxide primer.

Conversion of charpoy GI pipe comprising of following FD-220:- Taking out existing unserviceable plastic newar from the charpoy GI pipe, tighten the each part of charpoy, Supply and fixing of 02 Nos flat Iron of size 40mm x 6mm duly painted in black colour of length equal to width of plywood/GI charpoy and fix it tightly to GI Charpoy with nut bolt including necessary drilling into GI Pipe. Drilling holes 02 Nos in each long rails,02 nos in each short rails & 01 nos on both flat iron at centre .Supply and fixing 12mm thick BWR grade plywood of size 1980mm x 900mm fixed to GI pipe frame with GI Nut, bolts 6mm dia 60 to 65mm long complete all as shown on drawing and as specified. Make of plywood- Archidply/Centuryply/Greenply.

Taking out existing broken plywood from the charpoy GI pipe by loosening the nut bolts, tighten the each part of charpoy. Supply and fixing 12mm thick BWR grade plywood of size 1980 x 900mm fixed to GI pipe frame with new GI Nut, bolts 6mm dia 60 to 65mm long. Make of plywood- Archid/Century/Greenply.

Taking out old broken end long rail from three way elbow by unscrewing and replacing with new long rails of GI pipe 32mm bore Med grade duly threaded both end to the required size fitted to the frame complete all as specified and directed by Engineer -in- charge. Make of Pipe : JINDAL, Prakash Surya, TATA

Taking out old broken end short rail from three way elbow by unscrewing and replacing with short rail of GI pipe made out of long rail retrieved wide Item serial No-77 here-in-before duly thread both ends to require size fitted to the frame complete all as specified and directed by Engineer -in- charge.

Taking out old broken end short rail from three way elbow by unscrewing and replacing with new short rails of GI pipe 32mm bore Med grade duly threaded both end to the required size fitted to the frame complete all as specified and directed by Engineer -in- charge. Make of Pipe : JINDAL, Prakash Surya, TATA.

Taking out old broken end leg from three way elbow by unscrewing and replacing with legs of GI pipe made out of short trail retrieved vide Item serial No-78, 79 here-in-before; duly threaded both ends to required size fitted to the frame complete all as specified and directed by Engineer -in- charge.

Taking out old unserviceable/broken three way elbow from GI pipe by unscrewing and replacing with new three way elbow GI 32 mm bore/dia ISI marked and complete all as specified and directed by Engineer -in- charge. Make of Elbow : Unik/NVR/MIC.

Taking out old unserviceable/broken GI check nut from the frame by unscrewing and replacing with new check nut GI 32 mm bore/dia as per sample kept in BSO office and complete all as specified and directed by Engineer -in- charge. Make of Check nut : Unik/NVR/MIC.