RequiredExperience with Government
RequiredOEM Annual Turnover Bid to RA enabled No Truck Chassis Mounted Suction Cum Jetting Machine (Medium) ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Certification Chassis Certification ARAI/VRDE/ICAT Yes * Chassis Certification ARAI/VRDE/ICAT No - * Form 22 A - For compliance with pollution standards
Requiredsafety standards of Yes * 1/9 components and road worthiness as per CMVR Rules Conforming to IS:13496 for Suction Machine for cleaning Sewers
RequiredManholes and ancillary structures provided on sewer line and closed storm water drains Yes * Conforming to IS:11387 for high pressure jetting machine for sewer cleaning Yes * Availability of test reports for all critical components from the manufacturer or OEM of Jetting Pumps
Requiredvacuum pumps
Requiredpower takeoff unit
RequiredJetting Hose etc shall be from any ILAC/NABL accredited/Central Govt Lab to be furnished to buyers on demand Yes * Registration To Local RTO (Regional Transport Office)/RTA(Regional Transport Authority) By Seller - * NGT approval needs to be provided bu the Govt department - * Generic Parameters Make and Model of Vacuum Pump - * Make and Model of Jetting Pump - * Make and Model of Jetting Hose - * Make and Model of PTO - * Make and Model of Hydraulic Motor - * Make and Model of Hydraulic Pump - * Make and Model of Suction Hose - * Make and Model of - * 2/9 Jetting Nose Chassis Make and Model - * Chassis Model Number - * Chassis Type Medium Motor Vehicle * Type of Fuel Diesel Diesel Chassis Gross Vehicle Weight 12800 More than 12800.0 Or higher Kerb Weight 4250 More than 4250.0 Or higher Engine Capacity (cc) 3907 * Pay Load Capacity (Tonne Load) 8550 More than 8550.0 Or higher Vehicle Emission Compliance BS-IV BS-IV Engine BHP 140 More than 140.0 Or higher Engine Torque Max@rpm 420 More than 420.0 Or higher Maximum Speed of Vehicle(KM/Hr) 80 * No of Speed/Forward Gears 6 * Braking Distance 500 * Gradeability of Vehicle (%) 27.5 More than 27.5 Or higher Wheel Base 3760 More than 3760.0 Or higher Engine Aspiration System Turbocharged Intercooler * Mount Type Truck Mounted Unit * Fuel Tank Capacity 200 More than 200.0 Or higher Constructional Parameters Capacity of Split Shaft PTO of the vehicle (kgm) - More than 400.0 Or higher Overall Length 7465 * Overall Width 2255 * Equipment Length 7465 * Equipment Height 2500 * Equipment Rear Over Hang No * If Yes
RequiredDeclare Equipment Rear Over 0 * 3/9 Hang Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Derrick Arm Available No * Vacuum Pump - Rotary Vane/Sliding Vane Yes * Type Of Cooling - * Vacuum Pump Flow (cum/hr) - More than 500.0 Or higher Vacuum Pump Power (hp@rpm) - * Vacuum Relief Valve Size 4 * Vacuum Suction Depth 8 * Suction Hose - Lightweight
Requiredheavy duty
Requiredreinforced
RequiredPVC along with quick connect coupling arrangement Yes * Suction Hose Internal Diameter - * Suction Hose Length 3 More than 3.0 Or higher Number of Suction Hose (Nos) 5 * Safety Equipments - * Silencer/Filter(Micro Strainer) Yes * Exhaust Silencer and injection cooling air Inlet Silencer/Filter Yes * Blower Outlet and Air- Exhaust Silencer Yes * Check valve Yes * Vacuum Limitation Valve Yes * Drain Off valve Yes * High Pressure Jetting Pump With pressure regulating Arrangement Yes Yes Jetting Pump - Triplex plunger reciprocating Yes * 4/9 pump Working Pressure Range of Jetting Pump 155 155.0 - 200.0 Or higher Water Flow for Pump of Jetting Machine (LPM) 254 More than 254.0 Or higher Pressure Relief Valve Size 4 * Jetting hose inner Diameter (Capable of withstanding one point five times the maximum pressure generated by the pump) 25 * Jetting Hose Length 120 * Number of Nozzles for removing Blockage (Conical Head) 1 * Number of Nozzles for Flushing Sewer lines( Round Head) 1 * Number of balanced Nozzles for dry silt 1 * Water storage Tank Capacity 3500 3500.0
Required3500 Sludge Storage Tank capacity 2500 2500.0
Required2500 Total Tank Capacity (sludge tank+water tank) 6000 6000.0
Required6000 Maximum working pressure of Jetting Hose 160 * Minimum Burst pressure of Jetting Hose 430 * Thickness of tank plate of SS 304 with proper re inforcement to withstand the required forces 6 * Material of tank - Steel of Grade SS-304 Mild Steel (Grade-A) Confirming to IS 2062 latest Mild Steel (Grade-A) Confirming to IS 2062 latest Surface preparation and finish of tank's Exterior - sanded prior Yes * 5/9 to spray painting and spray painted with two coats of superior quality anti corrosive primer and two coats of enamel metal paint Surface preparation and finish of Tank's Interior - clean water two coats anti corrosive primer & two coats of grey enamel paint & Sludge shall be with two coats of epoxy paint to resist corrosion Yes * Provision for locking and unlocking arrangement of rear gate of tank
Requiredto be operated hydraulically for quick tipping and cleaning Yes * Hose Reel Drive operated by hydraulic motor Yes * Dished Head Yes * Tank Rear Door Opening by hydraulic system Yes * Reinforcement rings in pipes Yes * Hydraulic Pump Type Gear Type * Water Level Indicator Type (with safety coverage) - * Water Level Indicator Nos 2 * Thickness of Cover for Engine
RequiredPump and Hose Reel compartment 3 * Material of Cover for Engine
RequiredPump and Hose Reel compartment Galvanised IronSheet * Full bore Quick Acting Valves in the sewage path Yes * Air Pumps to safeguard the pump from overloading Yes * Make and Model of Air - * 6/9 Pump Sludge Trap between the Air Pump and the Tank Yes * Float cut out valve to seal the pump suction line Yes * Lubricating system for reducing friction loss Yes * Three sewer cleaning nozzles with varying rearward angles Yes * One nozzle extension for easy fixing of the hose and the nozzle Yes * Two stop tank strainer elements Yes * Two sets of operation and service manuals and spare parts lists Yes * Hose guide Yes * Counter Yes * Essential Spares Set of seal kit for Hydraulic Cylinder Yes Yes Set of seal kit for Hydraulic Motors Yes Yes Set of seal kit for Hydraulic Pumps Yes Yes Set of Filters for Hydraulic Systems Yes Yes Suction hose 30mtr and Jetting hose 120mtr Yes Yes Performance Parameters Warranty Time 24 More than 24.0 Or higher Warranty Distance 100000 * No of Free Service (Minimum 3 per year) Yes * * Bold specifications are the golden parameters.
