REPAIRS TO TOILETS JOINERY FLOORING AND OTHER MISC BR WORKS FOR SERVANT QUARTER IN D3 D1 AND OTHER AREA OF ZONE A AT NDA KHADAKWASLA

Amount

Dismantling stone slab of any description or thickness in floors, approns etc

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises.

Demolition of concrete in ground floors and pavings n. exc 15cm thick (above or below ground level)

M&L for 50mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregates) as in sub base stone complete all as directed

M&L for PCC(1:2:4) type B-1 (20 mm graded stone aggregate) 40mm thick as in floor with even and smooth finishing without using extra cement complete all as directed

Demolition of Precast cement concrete block/stone boulder walling built in CM or Cement lime Mortar.

M&L for precast cement concrete block masonry exc. 10 cm width with solid block C5 Grade and setting in cement mortar (1:6) complete all as specified and as directed.

M&L for 25mm to 30 mm thick rough dressed shahabad stone slab flooring bedded and jointed in cement mortar (1:6) and pointed in CM (1:3)

Ditto all as per Item Ser No 8 above but except sahabad stone

M&L for PCC (1:3:6) type C2 as in plinth protection finish surface even and smooth using extra cement (75 mm thick) incl forming dummy joints at 2 mtr centre to centre and filled with lean mortar (1:8) complete all as directed.

S&F for 38mm width plastic dividing strips 3.0mm thick inserted in position ,conforming to design

Hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of 100mm thick with broken/stone/boulers.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 sqm but n. exc 0.11 sqm in floors etc set and jointed in neat cement sluury and pointed in coloured cement to match including 15mm thick screed bed of CM (1:6) bedding complete all as specified and directed.

M&L for joint free glazed ceramic designed coloured tiles as in vertical surfaces of size 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing plaster in CM (1:4) complete all as specified and directed.

M&L in repairs bib taps cast copper alloy with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP 15mm dia bore complete

M&L in repairs angular stop cock cast copper alloy screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup.

M&L in repairs chromium plated overhead shower rose with or without swivel joints fixed to 15 mm bore of pipe.

M&L 100 mm dia cast iron Nahani trap, with grating including jointing cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts.

S&F in repairs Aluminium tubular towel rail 20mm dia ,D type 60 cm long between flanges

S&F Soap dish stainless steel fixed in repairs Complete all as specified

S&F grating doom 100 mm dia of PTMT (minimum weight 25 gms) all as specified

S&F in repairs, Stainless steel sinks without drainage board, 1mm thick in kitchen with plugs, washers and waste pipe inlc bedding in cement mortar on the dwarft or incl fixing cantilever brackets and connecting union to pipe, over all size 495 X420mm bowl size 410mm X 330mm X 160mm

M&L for 20 to 30mm thick unpolished cuduppah stone slab as in cooking platform and like incl necessary jointing and pointing and making good to disturbed surface complete all as specified

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe)

S&F in repairs wash hand basin vitreous china white (flat back) of size 550x400mm including 15 mm dia pillar cock , CI bracket 15mm dia polythene connection , 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified.

S&F in repairs PVC low level flushing cistern with dual flushing system including brackets 10 litre capacity with inlet ball valve float, handle,flush pipe etc. complete all as directed

M&L for taking down existing water proofing treatment of any description and layers from wall/roofs including screed bed or bedding layers of mortar of any thickness complete and cleaning the surfaces free from dust and scrubbing down with water complete all as specified and clearing the premises all as directed.

M&L for 15 mm thick Plaster on RCC roof slab with CM ( 1:4 ) including water proofing compound @ 3% by weight of cement shall be caried out as specified and directed. (Note WPC shall be measured and paid separatsly)

M&L for preparing plastered surfaces,@ 0.20 Kg/Sqm with primer and applying water proofing treatment on roof, walls, edges and vertical surfaces using APP modified memberane 3 mm thick with non woven polyster mat as reinforcement weighing not less than 3.50 kgs/Sqm complete over a coat of bituminous reflective aluminium paint all as specified

Supply only intergal water proofing compound

Taking down GI tubing including all necessary connections including cleaning for refixing, 15 mm bore pipe complete all as specified and directed.

Ditto all as per item ser No 33 above but 20 mm dia pipe.

Refixing old steel tubing 15 mm bore pipes and connections in new or old positions with new fitting (walls, ceiling, floors etc)

M&L for GI tubing 15mm dia medium grade with all fittings and fixtures like GI tees, elbows, diminishing pieces, cut pieces etc complete fixed to wall, ceiling or laid in floors complete all as specified and directed

M&L for GI tubing 20mm dia medium grade with all fittings and fixtures like GI tees, elbows, diminishing pieces, cut pieces etc complete fixed to wall, ceiling or laid in floors complete all as specified and directed

M&L for providing PCC (1:2:4) type, B-1 (using 20 mm graded stone aggregate) as in padding on RCC roof and similar work complete all as specified and directed

Disconnecting existing water tanks setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and refixing in position all as specified in SSR for capacity 500 ltr & upto & including 1000 lts complete all as specified and directed

Dismantiling water tank upto and exc 500 lit and not exc 1000 lit and removing from site

S&F rotational moulded polyethylene water storage 500 litres tank (cylindrical vertical with closed top three layered, ISI marked) hoisted and fixed in position and Including 20 mm dia brass float valves complete all as specified in SSR part I

S&F rotational moulded polyethylene water storage 1000 litres tank (cylindrical vertical with closed top three layered, ISI marked) hoisted and fixed in position and Including 20 mm dia PTMT float valves complete all as specified in SSR part I

Taking down chowkhats or frames with shutters without taking off shutters from frame exc 1.5 sqm and n.exc 4 sqm each

Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 sqm each

Taking down shutters exc 1 sqm n exc 2 sqm each and removing

S&F plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamferred, put together with glue, pinned at joints, second class hardwood.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification complete all as directed

S&F factory made 35mm thick IInd class hard wood plain framed panel shutter (two panel), with lock rail and panel of 12mm BWP commercial ply with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated.

S&F 35mm thick IInd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauze, etc. ( without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a).

M&L for painting two coats of Synthetic enemal paint over a coat of pink primer on new wooden surfaces including preparation of surfaces over 10 cm width or girth

S&F steel window or ventilators, fixed type with glazing bars

S&F steel window with side hung shutter including projection type hinge with steel handle ,and steel peg stay,complete with glazing bars dovetailed or welded

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth

S&F Factory made solid PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as per specification and as directed.

S&F Mild steel barrel tower bolt of extruded section and fixed complete length of bolt 200 mm

S&F 250 mm long mild steel sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding boltsof extruded sections all as specified and directed

S&F Butt hinges, medium weight, cold rolled, mild steel length of hinges 100 mm

S&F extruded aluminium alloy handle fabricated type annodised size of handle 150 mm

S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples

S&F second class hard wood Beads,straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.,

S&F frame work such as grills, gratings,hold fast etc, with ends of bars shouldered and or riveted, or forged into spikes; framed guard bars barred iron doors ladders framed balusers walk ways railing etc and similar work conforming to Fe.290Gde-E-165

S&F in repair Sheet glass 3 mm thick ordinary quality and glazing with oil putty/fixed with wooden beads in square n exc 0.5 sqm in each pane

S&F in repairs Figured glass 4 mm thick pin hed type and glazing with oil putty/fixed with wooden beads in squares n exc 0.5 sqm in each pane complete all as specified.

M&L for 4mm thick non Asbestos cement plain sheet 600 x 600 for ceiling on anodized aluminium grid work 610 x 610 mm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 610x610mm on RCC slopping, including dismantling of existing celing along with framework complete

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as directed.

S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering fixed with J-type or L-type or cranked hook bolts drilled with the screws and fixed in horizontal or verticle sections complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for mild steel rolled section connected with each other with welding (angle,tee,channel, beam, hollow sections etc) as in main and cross sections fixed with angle cleats or other connecting plates conforming to GdeFe-410- W(Gde- E-250) quality- B complete all as specified and directed.

M&L in repairs for second class hardwood, 20 to 25 mm thick weather boarding clean sawn, rebated on thick edge to give 20 mm laps and fixed, complete all as specified and directed.

M&L for in repairs and patch work not exc 5 sqm , providing roof tiles Mangalore pattern interlocking at side joints, laid dry in patches where required complete all as specified and directed

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even & smooth (without using extra lime or cement)

M&L for rendering 15 mm thick plaster in CM (1:6) on block or stone masonary wall surface finished even and smooth without using extra cement upto 12m height complete.

Dubbing out average 15mm thick on irregular face of walls in CM (1:4)

Racking out joints/pointing to stone work in wall to random rubble or polygonal rubble uncoursed or brought up to course built in cement mortar.

M&L for key ponting to random or polygonal rubble ,uncoursed or brought up to course with cement mortar (1:4) upto 12m height complete

Preparation of old decorated surfaces of wall by brooming down and scraping whereever necessary and applying two coat of dry distemper white or tinted complete all as specified and directed

M&L for preparing plastered new or old surfaces of wall by washing down & applying two coat of cement paint complete all as specified

M&L for preparing old painted wood or wood based surfaces exc 10 cm girth & applying one coat of synthetic enamel paint.

M&L for preparation of old painted surfaces of steel/iron surfaces by cleaning down surfaces exc 10 cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

M&L for complete removal of existing treatment and applying 3 mm thick wall care putty and two coats of dry distemper on wall surface including a coat of alkali resistant primer complete all as specified and as directed.

Taking down CI pipe/AC ,PVC pipe of any dia .

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed

S&F for 75mm dia PVC (SWR) bends any radius complete all as specified and directed

AVS CONSTRUCTION

Prem Singh

ELIEYAS TRADERS

Raj Construction Company

SUN Enterprises

Sunil Constructions

Sarkar Enterprises