KMDA/HOUSING /EE (Elec.)/ NIT-33/ 2025-2026 for T1

Supply and delivery of One No. 10 H.P. submersible Pump Motor set (Make KSB) having Bronze Impeller and discharge capacity 36 Cum./hr. of clear water at a total head of 48/49 Mtr. Duly coupled with wet type wiring motor 400+(-) 5% volts 3-phase 50 NZ. A.C. with spring loaded non-return valve 3” dia. Including supply of 2 x 3 x 2.5 Sq.mm. PVC insulated and sheathed (Finolex) water proof copper conductor flat cabin of 25 Mtrs. Double run) duly joined with motor including supplying & fixing 4 Nos. Stainless steel nuts and bolts for coupling pump motor set etc. complete.(Detailed specification of pump motor set to be supplied by the Tendered)

Supply & delivery of 75mm dia x 3mtr long UPVC column pipe screwed at both ends and one side with column socket complete with bolts, nut & rubber gasket having standard 80 mm DN(88mm OD), delivery pressure 17kgf/cm2, make Ashirvad

Supply & delivery of 75 mm dia top & bottom adapter for UPVC column pipe, make Ashirvad.

S & F 90 degree X 3” dia. G.I. bend Heavy gauge (I S I marked )& Socketted incl. S & F of suitable M S nipple plug for fixing pressure gauge etc .complete.

S & F,. Heavy gauge erection clamp (22” x 8” x ¼”) filling with 4 nos. 5/8” nuts & bolts (GKW) with double washers including paintings etc. complete.

S & F 10” dia. ¼” thick M.S. well top cover round shape with 2 nos. Suitable size hole, paintings etc. complete.

Supplying, installing, Commissioning of 10 HP automatic Star/Delta starter in sheet steel enclosure with suitable relay range (9-14 AMP) (L&T / LK make) on iron angel frame on wall including all connection complete as per direction

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. Angle iron frame. 63A (L&T make)

Supply and drawing of 2 nos. 3 core 4 sq mm submersible copper cable through 50 mm dia GI Pipe (M) gauge ISI marked incl. all accessories union, socket, bend, etc. after making grooves on floor / soil by excavation trench depth 760 through any kind of soil and refilling the same incl. S & F of above GI pipe with all accessories from well top cover to starter with earthing attachment/operation room and all connection complete as per direction of EIC

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (a) By TATA-Medium GI pipe

Connecting the different main switch starter voltmeter ammeter box etc. from earth busbar by S&F of 8 SWG GI wire on wall with staples as required etc.Complete as per direction.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish (a) Average run 5 mtr

Supply, fitting & fixing of light fitting including brush batten holder (3” wooden round block) 60 watt Bulb (Philips) and connection complete.

Lowering the Pump Motor set along with 9 nos. UPVC Pipe incl. commissioning etc. complete as per direction of EIC.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials asrequired .a) 40 mm dia

Supply of following sizes 1.1 KV Grade Aluminium armoured cables. A) Cable size- 4Core 16 Sqmm

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (c)4x6 Sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4x6 Sqmm

Add GST @ 18% on Total amount over item No. 1 to 20

Add Labour Welfare Cess @ 1% on Total amount over item No. 1 to 21

Please Enable Macros to View BoQ information