8602 REPAIRS TO WOODEN JOINERY ALUMINIUM JOINERY TILING PLASTERING AND CONNECTED MISC BR WORKS AT A AND B WING OF DAD RESIDENTIAL COMPLEX UNDER AGE BR I OF GE SOUTH PUNE

Amount

M&L for pruning of vegetation and plants on the external wall / roof top surfaces (dia not exc.3 inch) and applying Hydrochloric acid on the left over root portion and making good distrubed portion with cm 1:4 or PCC 1:2:4, grouting and finished with and incluidng two coats of cement base paint to match the existing colour shade, etc. complete all as directed. Note:- The cost of necessary scaffolding upto G+3 shall be deemed to be included in unit quoted rates. (ii). Pruning of one plant (Dia of trunk not exceeding 3 inchs) including removing surroundings vegetations and making good disturbed surfaces by applying above mentioned provisions & treatments will be measured as "One Job"

M&L for 20-25 mm thick machine cut, pre-polished kota stone slab as in steps tread and riser over screed bed 15 mm thick in cement mortar 1:6, set & jointed with neat cement slurry and pointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including dismantling of old concrete tiles & screed bedding layer from steps and removal of debries outside MD land etc. complete all as specified and directed

M&L for 20-25 mm thick machine cut, pre-polished kota stone slab as in flooring, mid landing of staircase, laid over and including screed bed of 15 mm thick in cement mortar 1:6, set & jointed and pointed with grey neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including dismantling of old concrete tiles & screed bedding layer from steps and removal of debries outside MD land etc. complete all as specified and directed

Supplying, fixing, jointing and testing galvanised steel tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor including taking up or down of old steel water tubing and connections including cleaning for refixing or remove from site, complete all as specified and directed for following size of pipes :- (a). 15mm bore

(b) 20 mm bore

M&L for Machine cut cudappah stone slab 20-25mm thick, laid over and including screed bed or bedding layer 15 mm thick in CM 1:6, laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc, including dismantling of old cudappah stone slabs & screed bedding layer and removal of debries and dismantling materials (Except stone) outside MD land etc. complete all as specified and directed

S&F in repairs roof sheeting prepainted galvalume aluminium zinc coating 150 gms, GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of old unserviceable AC sheet complete all as specified and as directed.

Excavation in any type of soil for post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth arround, in layers n. exc. 15 cm, watering, and removing surplus soil to a distance n. exc. 50m and making good disturbed surfaces, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete / base of fencing posts, complete all as specified and directed.

S&F in repairs 18/19 mm thick blolck board, grade-I quality, exterior grade type with decorative face veneer on both faces including providing 2nd class hardwood beading on all edges fixed with screws to timber frame work as in CB partition and shelf and other works including dismantling of old existing unserviceable boarding complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (When open) 30mm, complete all as specified and directed.

S&F fanlight pivot with 20 mmx50 mm size, suitable for 25 mm thick shutters, catch spring of cast brass type, fixed with screws etc. complete all as specified and directed

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified & directed.

M&L for cutting chases, pinning in, concrete block / brick / stone walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

S&F in repairs lid / cover suitable for 500/1000 litres capacity PVC water storage tanks fixed with PVC locking arrangements complete all as directed

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall / ceilings / under floors, including taking down of old unserviceable pipe complete all as specified and directed. Note for item nos 15 & 17:- Rate quoted shall be deemed to be inclusive of the cost of necessary scaffolding & security measures as the work is to be carried out on elevated height upto 12.0 m high building.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/ ceilings / under floors including taking down of old unserviceable pipe, complete all as specified and directed.

S&F in repairs 40mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall / ceilings / under floors including taking down of old unserviceable pipe, complete all as specified and directed.

S&F PVC (SWR) bends / Tee with acess door for 110mm bore complete all as specified

S&F PVC (SWR) bends / Tee with acess door for 75mm bore complete all as specified

S&F 100 mm dia PTMT grating doom, having minium weight 25 grams, complete all as specified and directed.

S&F brass Locks suitable for cupboards, grade 1, size 65 mm (2 lever) with two keys, complete all as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of flooring, finish the surfaces fair and even, complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, of any shape and size, conforming to IS-15658-2006 glossy finish as in floor / pavement laid on and including 50mm thick stone dust cushioning, laid dry to the profile over rammed earth / murrum filling complete all as specified and directed

S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15 mm stop valves, concealed, long shank, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

M&L for complete removal of existing treatment, washing, scrubbing down, preparation of surfaces and applying two coats of oil bound distemper over a coat of primer on walls etc. including 2 mm thick wall care putty on wall surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment, washing, scrubbing down, preparation of surfaces and applying two coats of oil bound distemper over a coat of primer on ceilings including 2 mm thick wall care putty on ceiling surfaces, complete all as specified and directed.

M&L for coloured Ceramics tiles 450x300x 7 to 8mm thick as in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces including triangular filleting in CM 1:4 on top edges, including demolition / dismantling of wall tiles & backing coat and removal of debries & dismantled materials outside the MD land complete all as specified and directed.

M&L for non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and incluidng 15mm thick screed bed or bedding layer as in CM 1:6, including dismantling of existing unserviceable tiles / floor hearths & screed bedding layer of any description and removal of debries & dismantled materials outside the MD land complete all as specified and directed.

M&L for (light shade) Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, etc. including dismantling of existing unserviceable tiles / floor hearths & screed bedding layer of any description and removal of debries & dismantled materials outside the MD land complete all as specified and directed.

M&L for 18-20 mm thick Granite slab (of any type/colour) work (table rubbed and polished) in steps, pillars; window cills / jamb, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite. as counters of any radious etc laid over and including 20 mm thick screed bed in CM 1:4 including dismantling of existing unserviceable stone tiles / floor hearths & screed bedding layer of any description and removal of debries & dismantled materials (except stone slabs / tiles) outside the MD land complete all as specified and directed.

S&F in repairs stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 30"x32"x8"/10" of approved quality of finish complete all as specified and directed. Make : Blue Star or equivalent make

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest, including provision of concrete bedding etc. complete all as specified and directed.

S&F floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm overall length of cover plate fixed in floor, complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltrs capacity approved make including all internal fitting, pair of bracket, including inlet / outlet PVC pipe connections etc complete all as specifed and directed by Engr-in-Charge.

S & F in repairs vitreous china wash basin white flat back of size 550 mm x 400 mm including 32 mm dia CP waste coupling long screw, chain and plug and PVC waste pipe including CI brackets, etc. complete all as specified and directed.

M&L for replacement of 4mm thick plain or tinted glass pans exc. 0.50 Sqm each panes, including replacement of handle lock, rubber beading, bearing of shutter and making good to disturbed surface including taking down and re-fixing of shutter in same opening after doing necessary repairs etc. complete all as specified and directed

M&L for replacement of 4mm thick plain or tinted glass pans n. exc. 0.50 Sqm each panes, including replacement of handle lock, rubber beading, bearing of shutter and making good to disturbed surface including taking down & re-fixing of shutter in same opening after doing necessary repairs etc. complete all as specified and directed

S&F in repairs brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose, 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore, complete all as specified and directed.

Supply and fixing in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore GI pipe, complete all as specified and directed.

S & F 15 mm bore bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed

S & F plain sheet glass 4mm thick plain or tinted, fixed to aluminium frame in partition complete all as specified and as directed. (Note:- The cost of beading / rubber packing etc shall be deemed to be included in the Unit quoted rate)

S&F in repairs waste coupling fitting 32 mm bore, brass chromium plated for glazed ware sinks, wash basin etc with long screwed shanks and flynut, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm, suitable for hot & cold water complete all as specified and directed.

S&F in repairs PVC flexible waste pipe 32mm bore having 90 Cm length suitable for whb / kitchen sinks, complete all as directed.

S&F in replacement rotational moulded polyethylene water storage tank 500 Litres capacity, triple layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tanks and removing to store, including making all connections to inlet and outlet pipe lines, including providing of new tank nipples of suitable size, complete all as specified and directed by Engineer-in-Charge.

S & F Transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) complete all as specified and as directed. (Model- Joyo Cera Gls 132 or of equivalent make)

M&L for 5mm thick rendering in cement mortar 1:3 on ceiling surfaces and finished even and smooth without using extra cement including taking down of old cement plaster, hacking for key, and removal of debries outside the MD land complete all as specified and directed

M&L for 10mm thick plastering in CM 1:6 on fair surfaces of bricks or concrete surfaces, finished even smooth without using extra cement including taking down of old cement plaster, hacking for key, and removal of debries outside the MD land complete all as specified and directed

M & L for rendering 10mm thick in cement mortar 1:4 on brick /concrete surfaces finished even & smooth with a thin layer of sagol finish including taking down of old cement plaster, hacking for key, and removal of debries outside the MD land complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying weather proof Apex Ultima weather proof paint of required shade with silicon additive over and including priming coat of exterior grade of primer over external surface of walls, etc. complete all as specified and directed

M&L for three coats white wash on new AC sheet surfaces of ceilings including preparation of new surfaces, complete as specified and directed.

S&F in repairs soap dish, chromium plated brass fixed width brass screws as in repair complete all as directed

M&L for preparation of newly plastered surfaces of walls & putty surfaces and applying two coats of oil bound distemper over and including 2mm thick wall care putty complete all as specified and directed

Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each, complete all as specified and directed.

Taking down / cutting of steel windows shutter by means of gas cutter with out disturbing of sofit / jambs / cills etc of any description n. exc. 1.5 sqm (without taking off guard bar) complete all as specified and as directed.

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening not exc 1.00 sqm each complete all as specified and as directed.

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening exc. 1.00 but n. exc. 2.00 sqm each complete all as specified and as directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36 mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge :- (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F ventilators / louvers with partly gauge shutter made from 4mm thick 10 cm wide frosted glass strips and following section aluminium powder coated of make-Jindal or equvalent make with rubber beading, locking system etc complete all as specified and directed.

S&F stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.4 mm and fixed with stanless steel stepple to aluminum window shutter including taking down shutter from frame and refixing in frame complete all as specified and directed.

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings, complete al as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles plain colour PVC sheet for top rail , lock rail & bottom rail either side & as gap isert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC beading and jointed together with solvent cement, supplying and fixing in the frame at site as per SSR Pt-I specification & drawing.

M&L for providing cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) 75 mm thick as in plinth protection finishing even and fair on top using extra cement with 6mm wide joints throughout the thickness of plinth protection complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles / cracks in floor / wall with and including second course injection of CORESEAL 135A/CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. (Note :- The rate is inclusive of replacement of any defective fittings / fixtures of any type / material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend.) (Makes for this item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved)

S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm with and including MS hold fast - 04 Nos., MS cold rolld 100mm size butt hinges- 03 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm with and including MS hold fast - 04 Nos., MS cold rolld 100mm size butt hinges- 06 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

S&F 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed

S&F 100 mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed

S&F 75mm size hinges medium weight, cold rolled mild steel and fixed complete all as specified and as directed

S&F 100 mm size hinges medium weight, cold rolled mild steel and fixed complete all as specified and as directed

S&F 75mm size Hasp and staple, aluminium anodised with mild steel hinges pin including bolt to hinges plate fixed with screw complete all as specified and directed .

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F in repairs waste coupling of PTMT (half or full threaded) 32/40 mm suitable for kitchen sink , complete all as specified and directed.

Dismantling of structural steel work including door gates framed truss etc. complete all as specified and as directed..

M&L for MS structural steel work, framed as in trusses, purlins, rafter etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position complete as specified and directed.

M&L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F 35 mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both side with 3mm thick veneer decorative plywood grade-1(with BWR resin), shade of veneer as approved white ash crown, figured sycamore, red film, Zebroo, white beech, steam beech, white ash maple(light) of Truwood or century make, fixed on both faces including all around wooden edges of flush shutter etc complete fixed with nails including preparation of new wooden surfaces & applying two coats of melamine polish on veneer decorative plywood grade-1 complete including fancy type stainless steel "D" type heavy duty handle (size more than 450mm long), etc complete all as specified & directed by Engr-in-charge

M&L for 30mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass (with out sash bars), guage etc divided into squares with plain, chamfered or rounded, mitered and rebated sash bars any numbe for securing glass, size of members of shutters as specifie in clause 8.24(a) of SSR Part-I 2009, complete all as specified and directed.

S & F in repair 20 mm dia stainless steel, fancy type curtain rods, medium weight including bracket, stops, latoo etc (Minimum 02 nos. for each opening) fixed in repairs including taking down old one complete all as specified and directed by Engineer-in-Charge.

SARATH ENTERPRISES (BID ID -3109447)

Gauri Associates (BID ID -3113734)

L.K.R.TIWARI CONSTRUCTION (BID ID -3122677)

REKHA ELECTRICALS (BID ID -3101026)

PRASHANT CONSTRUCTION (BID ID -3112565)

Suma Construction (BID ID -3125350)