Providing and fixing of 12.5/16/20 mtr High Mast Lights in Surajpur industrial area site B and C and Housing site IV V and EPIP Kasna

Amount

Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etccomplete in all respect as per direction of E/I. Make- Philips, Bajaj, Crompton

Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories forhigh mast such as head frame suitable for 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor platesetccomplete in all respect as per direction of E/I. Make- Philips, Bajaj, Crompton

Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect Make- Philips, Bajaj, Crompton

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection. CAT-AAA (With 05 Years Warranty)

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection. CAT-AAA (With 05 Years Warranty)

S/L of 25x3.5 core Al. armoured cable PVC insulated Ar. served & sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I.Complete in all respects . The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Make -Grandlay / Havells/Polycabe/Gloster (i) Laying of cable in existing DWC HDPE PVC Pipe/GI Pipe/RCC Pipe/MS Pipe etc or along the wall/Pole/Panel/High Mast. (373-170 = 203)

(ii) Laying of cable in ground with protection of burnt bricks on sides and top put acriss with over a cushion of 75 mm thick sand arround the cable complete in all respect as per direction of E/I.

Supply and laying of 70x 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. Make -Grandlay / Havells/Polycabe/Gloster (i) Laying of cable in existing DWC HDPE PVC Pipe/GI Pipe/RCC Pipe/MS Pipe etc or along the wall/Pole/Panel/High Mast. (915-170= 745)

(ii) Laying of cable in ground with protection of burnt bricks on sides and top put acriss with over a cushion of 75 mm thick sand arround the cable complete in all respect as per direction of E/I.

Supply and wiring of submains with two nos. of 4 sq. mm. FRLSH PVC insulated 11000 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all materials labour and T&P required for poroper completion of as directed at site by engineer in charge.

Supply and Fixing on type(MPO-5) heat shrinkable jointing kit suitable for XLPE 11 KV HT Cable outdoor type including all materials labour and T&P required for proper completion of work as per analysis enclosed.

S/F of Plain or Pin type copper tin plated cable socket (Lug) to the cable lead, insulating with tape and making connector etc. Complete in all respects as per Direction of E/I 16 sq.mm

S/F of Plain or Pin type copper tin plated cable socket (Lug) to the cable lead, insulating with tape and making connector etc. Complete in all respects as per Direction of E/I. 25 sq.mm

Supply & Laying of 63 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc in 75 mm below GL treanch. including exacuvation reffling of trench cost of material, labour and T&P.

Supply & Laying of 120 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (75 mm below from ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.

Supply, erection testing & commissinoing of outdoor type Aluminium wound oil cooled transformer of rating 25 KVA, 11/0.433KV on double pole including cost of base channel & holding clams by PVVNL as per annexure 28 of CDB of UPPCL-2021-22

Supply and erection of double pole 410-SP-56, 11 m long, 241 Kg complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45cm above the ground level.

Supply and fixing of 11 KV pin insulator complete in all respect.

Supply and fixing of Ms angle50x50x6x2028mm on double pole structure complete with clamp, Nut & Bolt forT/F Base.

Supply and fixing of MS Top Channel of 125x65x2240mm including cost of holding clamps and materials men &T&P.

Supply and fixing of T-off chanel as per site requirment

Supply & Fixing of outdoor type 11 kv fuse set relco/rama/rastirya make with insulator complite in all respect .

Supply and fixing of 11 kv TPMO with comp;ete with insulator &other acessories (Relco/ Azad/ Rama/ Other standerd make as approved by UPPCL)

Supply, sagging, jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding wire and jointing sleaves etc. complete in all respect including men & material, T&P proper completion of work as per direction of Engineer in-charge. (25mtrx3x1.03x0.128kg/per mtr =9.88kg)

Supply and fixing of MS Dropper Channel of 100x50x2000mm including cost of holding clamps and materials men &T&P.

Painting of ST Pole and all mountings on it with two coat of aluminium paint with an under coat of red oxide Paint on lenght of 11 mtr. Support above ground level or as per direction of Manager-Incharge Complete including all T & P men and material required for proper completion of work.

Supply & fixing of danger board fabricated from 10 gauge M.S SHEET AS PER i.e. Rurles

Supply and fixing of anticlimbing device fabricated from G.I flat of 25mmx6mm size in sape of ring of the pole size heving G.I. flate pointed fins of length 225 mm in 8nos and also barbed wire in 200 mm length above the said ring including material

Supply and erection of stay of ST pole with GI anchor plate (152x152x6mm) stay rod (16mmx1.85m long) GI stay below (16mm dia rod, triple,double stay tightener, stay insulator, clampas & stay wire (GS 7/3 .15MM) including grouting in 1:4:8 ratio of cement corcente using coars sand , over burnt brick ballast as per direction of engineer in charge complete in all respect.

Supply & fixing of following capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of timer swicth TSO 100 series with contractors HRC fuse, isolating switch Metering instrument box with CTS etc. 40 amp. TPN. UPPWD SCH NO 807 (F) (ii)

S&F of 63 Amp. 415 V metal clad T.P. rewireable type switch fuse unit on angle iron bracket complete in all respect. CAT-B

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified

S/L of 25x3 mm. G.I. Strip from earth electrode directly in the ground as required complete in all respects

S/B of 600mm x 600 mm x 6 mm G.I. plate vertically for earthing with its top at least 3 mtr below ground level having complite whith 20mm dia GI pipe and funnel for watering and one earting lead of two no.8 to 10 SWG GI wire in 15 mm dia GI pipe upto swich board( from appron to switch boaed the cost of GI pipe and GI wire will be extra) 30cm square CI frame with hinged cover masonry housing alternate layers of charcol/coke and saltatleast 150 mm thick alround etc. as per direction E/I complete in all respect.

Supply & fixing of 50 mm dia GI pipe B class for climbing up the cable from ground to over head LT line pole/Metering point complete with GI fitting including material,labour and T&P as per SIDC Sch item No. 25A.1