Supplying fitting and fixing of furniture for the newly constructed G plus2 storied Nabanna Guest House at Howrah

Amount

Supply ,Fitting & Fixing of Public Seating chair 3 Seater from ISO 9001:2015, ISO 14001, ISO 45001:2018. , BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. The dimensions would be 1784mm W X 563mm D x 840mm H. The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound. The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame.A 0.315 thk plate of HR steel is welded to beam for fixing seat and back frame. The legs shall be of Mild steel and is powder coated to the thickness of 50microns

Supply ,Fitting & Fixing of Mid Back Chair from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA, India Design Mark, GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Size : 44.0 cm (W) x 46.0 cm. (H) *Seat Size :48.5 cm. (W) x 47.0 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density 45±2 kg/m3, and hardness load 16 ± 2 kgf as per 15:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "5" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-am)de form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 0.6 ± 0.5cm. The Armrest Top is made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in glass-filled Poly-amide and fitted with 5 nos. in wheel castors. The pedestal is 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors. TWIN WHEEL CASTORS: 5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0±0.1cm heel diameter and assembled to the pedestal.

Supply ,Fitting & Fixing of Optimizer from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Overall Dimensions of SS1 - Single Static 1 Bay Push Pull Type (U/C + Fittings) shall be 915mm(W)x457mm(D)x1980mm(H). Overall Dimensions of SL1 - Single Last 1 Bay Push Pull Type (U/C + Fittings + Handle) shall be 915mm(W)x457mm(D)x1980mm(H). Overall Dimensions of TM1 - Twin Mobile 1 Bay Push Pull Type(U/C + Fittings + Handle) shall be 915mm(W)x915mm(D)x1980mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units (1,2,3,4,5) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns . The movements of the system shall be Push pull configuration (TYPE-P1/TYPE-P2) : Movement of units achieved by pushing or pulling chrome plated 'C' Handle fitted onto 1.6 mm thick plate (mounted on each double & single movable units) & rigidly fixed at suitable height on body side . Each movable undercarriage has 4 nos. of antifriction ball bearings for rolling onto channels & 4 no. of antifriction ball bearings for guiding between channels & 'J' section . Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Recess handle lock is of & placed at suitable height . This arrangement occupies a space of 90.0 mm. When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover ; and with tile fascia option , it will be mounted in the recess of vertical trim . Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units . Knob shall be rotated to unlock position when units are to be moved . End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square bright bar . Easteners shall be galvanized / blackodized / Zn plated. The label holder shall be made from 2 mm thick clear transparent acrylic sheet . Also total no. of loading levels per understructure shall be 5 for SS1.

Supply ,Fitting & Fixing of Public Seating Chair 3 Seater 2 Arms from ISO 9001:2015, ISO 14001,ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. SEAT SHELL : The Seat is made from high density self-skin PU foam reinforced with 3mm M.S. perforated sheet insert. The PU foam having density of 520±10 kg/m3 with a Shore 'A' hardness of 55±5. SEAT SIZE : 52.0 cm (W) x 46.5 cm (D). BACK SHELL : The Back is made from high density self-skin PU foam reinforced with 3mm M.S. perforated sheet insert. The PU Foam having density of 520±10 kg/m3 with a Shore 'A' hardness of 55±5. BACK SIZE : 52.0 cm (W) x 51.5 cm (H). CROSS BEAM : Cross Beam made up of black powder coated M.S E.R.W. square tube of size 6.0±0.05cm x 6.0±0.05cm x 0.18±0.016cm thk fitted with polypropelene endcaps. LEG & ARM REST : Leg & Armrest are made up of powder coated High pressure Aluminium Die cast. Leg Are fitted with soft grip PVC level adjusting shoes.

Supply ,Fitting & Fixing of Main Desk with ERU & Pedestal from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. The Main table shall be of size 1800 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. The Size of the Back unit shall be 2215mm width x 410 mm Depth x 2000mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H

Supply ,Fitting & Fixing of Back Unit (2215Wx410Dx2000Hmm) from ISO 9001:2015, ISO 14001,ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. The Size of the Back unit shall be 1000 mm width x 480 mm Depth x 2035 mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. The mobile unit can be bought in multiples.PU coating hardness 1.5H.

Supply ,Fitting & Fixing of Leatherette High Back Chair with Seat Slide from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. BEAT CHAIR SYNTHETIC LEATHER: SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 ; upholstered with synthetic leather over moulded High Resilience Polyurethane foam. HIGH BACK SIZE: 51.8 cm. (W) x 75.2 cm. (H). SEAT SIZE: 49.0 cm. (W) x 51.4 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features : Up-Down adjustment– 8 steps (8.0±0.5cm range). Height adjustable armrest structure which is chrome plated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. 360° revolving type. Single point control. Front-pivot for tilt with feet resting on ground ensuring more comfort. Tilt tension adjustment. 4-position locking with anti-shock feature. Seat/back tilting ratio of 1:2. BACK HEIGHT ADJUSTABILITY: Back can be adjusted in 5 positions by manually. Stroke of height adjustable spine is 7 cm. Back height adjustability is applicable for for High back and Mid back chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. PEDESTAL ASSEMBLY WITH CASTORS: The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTOR: The twin wheel castors are injection moulded in black PP. OPTION OF SLIDING SEAT MECHANISM : Seat can be slide horizontaly as per user convenience. Stroke of seat slide is 5 cm. This option is available for revolving pedstal type of chair.

Supply ,Fitting & Fixing of Leatherette Visitor Chair from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification.SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 ; upholstered with synthetic leather over moulded High Resilience Polyurethane foam. SEAT SIZE: 49.0 cm. (W) x 51.4 cm. (D). TUBULAR VISITOR FRAME (Visitor Chair): The tubular frame is powder coated ( DFT 40-60 microns ) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. Tube with a connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly. Fixed Armrest Top is PU moulded over metal insert.

Supply ,Fitting & Fixing of Glassdoor Storage Unit from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Overall Dimensions of VSDU - 8 shall be 900mm(W)x450mm(D)x1830mm(H). The top shall be Metal top (1 mm add in unit height ). The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise .VSDU 8 shall have glass door for visibility of the content . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 8 shall have 4 no. of adjustable full shelves . Accessories optional shall be cradle with pipes for hanging instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 8 - A4 size box file can be stored vertically on four shelves and clear space above fifth shelf is 220 mm.

Supply ,Fitting & Fixing of Workstation from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Size - 1200 x 600. Panel height of 1200mm and thickness of 52.4mm on the main spine and 25mm on the return side. The spine comprises of blocks comprising of 38mm thick paper honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate or fabric on both sides. The panel structure made of aluminum extrusion having material AL96063-T6 & have average wall thickness of 1.2 mm & powder coated with epoxy-polyester powder. Top tile is split into Fabric tackable tile and split white board. The Fabric tackable tile shall be upholstered metal tiles in 0.6mm thick G.I. grade O as per IS: 277, with P.E. foam in the tile for tackablity. White board tiles shall be made of 8.0 mm thick particle board conforming to IS: 12823 laminated with 0.6mm thick white glossy high pressure laminate on outer side & 0.6mm backing laminate on inner surface and will be having all its edges with minimum 0.5 mm thick PVC edging. The intermediate blocks made from 18mm thick PLB battens which hold 3mm MDF in between. 6mm thick PE foam shall be pasted on 3mm thick MDF and this assembly shall be upholstered with approved shade of fabric on both sides using adhesive. Bottom tile is metal powder coated metal tiles in 0.8 mm thick M.S. CRCA Grade D as per IS: 513. Workstation panel of 52 mm thk (the spine panel) shall have provision of cutout for a 4 module on the block above worksurface and a 6 module electrical + 2 module data switch on the bottom block (below worksurface).

Supply ,Fitting & Fixing of High Back Chair from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. 1. Seat Assembly: The cushioned seat is made up of injection moulded plastic outer & inner. Plastic inner is upholstered with leatherette and moulded High Resilence (HR) Polyurethene foam of Density = 45 +/- 2 kg/m3 and Hardness load 16 +/- 2 kgf as per IS:7888 for 25% Compression. Seat size: 47 cm (W) x 48 cm (D). 2. Back Assembly: The cushioned back is made of PU Foam with Insitu Moulded MS- E.R.W Round Tube size 1.9 +/- 0.03 cm X 0.16 +/- 0.0128 cm. It is upholstered with leatherette. High back size: 47.7 cm (W) x 76.4 cm (D). 3. Armrest: The armrest top is moulded from polyurethane (PU) and mounted on to a drop lift adjustable type tubular armrest support made of 3.81 +/- 0.03 cm x 0.2 +/- 0.01 cm thk MS-ERW tube having chrome plated finish. The armrest height adjustable up to 6.5 +/- 0.5 cm in 5 steps. 4. Active Bio-Synshro Mechanism: The adjustable tilting mechanism is designed with the following features: 360 Deg. Revolving Type, Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. Tilt tension adjustment can be operated in seating position. 5 position tilt limiter giving option of variable tilt angle to the chair. Seat/back tilting ratio of 1:2. The mechanism housing is made upp of HPDC Aluminium black powder coated. 5. Seat Depth Adjustment: Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0 +/- 0.5 cm. 6. Adjustable back support: Back frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42 +/- 0.5 cm for the comfortable back support to suit individual need. 7. Pneumatic Ht. Adjustment: The pneumatic ht adjustment has an adjustment stroke of 10.0 +/- 0.3 cm. 8. Pedestal Assembly: The pedestal is High pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal is 65.0 +/- 0.5 cm pitch-center dia 75.0 +/- 1.0 cm with castors.

Supply ,Fitting & Fixing of Mid Back Chair from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. 1. Seat Assembly: The cushioned seat is made up of injection moulded plastic outer & inner. Plastic inner is upholstered with leatherette and moulded High Resilence (HR) Polyurethene foam of Density = 45 +/- 2 kg/m3 and Hardness load 16 +/- 2 kgf as per IS:7888 for 25% Compression. Seat size: 47 cm (W) x 48 cm (D). 2. Back Assembly: The cushioned back is made of PU Foam with Insitu Moulded MS- E.R.W Round Tube size 1.9 +/- 0.03 cm X 0.16 +/- 0.0128 cm. It is upholstered with leatherette. Mid back size: 47.7 cm (W) x 60.1 cm (D). 3. Armrest: The armrest top is moulded from polyurethane (PU) and mounted on to a drop lift adjustable type tubular armrest support made of 3.81 +/- 0.03 cm x 0.2 +/- 0.01 cm thk MS-ERW tube having chrome plated finish. The armrest height adjustable up to 6.5 +/- 0.5 cm in 5 steps. 4. Active Bio-Synshro Mechanism: The adjustable tilting mechanism is designed with the following features: 360 Deg. Revolving Type, Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. Tilt tension adjustment can be operated in seating position. 5 position tilt limiter giving option of variable tilt angle to the chair. Seat/back tilting ratio of 1:2. The mechanism housing is made upp of HPDC Aluminium black powder coated. 5. Seat Depth Adjustment: Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0 +/- 0.5 cm. 6. Adjustable back support: Back frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42 +/- 0.5 cm for the comfortable back support to suit individual need. 7. Pneumatic Ht. Adjustment: The pneumatic ht adjustment has an adjustment stroke of 10.0 +/- 0.3 cm. 8. Pedestal Assembly: The pedestal is High pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal is 65.0 +/- 0.5 cm pitch-center dia 75.0 +/- 1.0 cm with castors.

Supply ,Fitting & Fixing of Lounge Sofa from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Seat & Body: Understructure is made of combination of plywood & pinewood members. Plywood is 12 ± 1mm thk. [moisture resistance & termile proof as per IS:303] & pinewood are cross section [22x25, 22x40, 25x75 & 25x100mm] are without major knots & defects on the surface. 3mm MDF is stapled on the seat front. bottom vertical surface to get the surface to stick the foam. Dia. 3.8mm zigzag spring asly. is mounted on the seat structure with spring mounting plastic bracket for support & additional cushioning purpose. Elastic belt of 2" width are used above the spring asly. to give good sagging effect. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid the tearing of seat foam with the surface contact of metal spring. Back vertical surface is stapled with non-woven cloth to get surface to stick the foam. Complete understructure is made by gluing & stapling. Foam: Seat is made of PU foam with density 28 kg/m3 having an additional top layer of supersoft PU foam with density 18 kg/m3. Recron sheet of 230GSM is used above this foam. Seat front bottom vertical surface & back vertical surface is glued with the PU foam with density 22 kg/m3. Side vertical surface, body front taper vertical & top horizontal surface is glued with PU foam with density 16 kg/m3. Upholstry: Seat & body upholstry is made in the dual tone colour with fabric / fabric option & fabric / leatherite option. Back Top Cushion: Understructure: Understructure is made of combination 12±1mm & 6±1mm thk. plywood [for 2 Seater, 3 Seater & Chaise Lounge] & combination 12±1mm, 4±1mm thk. plywood & 3mm MDF [for Small Corner & Big Corner] with gluing & stapling. Foam: It is made with supersoft PU foam with density 18 kg/m3. Upholstry: It is upholstred with fabric. These back top cushions are fitted with the seat & body structure with the chipboard screws. Qty. of back top cushion fitted with each SKU as follows - for 2 Seater - 2 Nos., for 3 Seater - 3 Nos., for Chaise Lounge - 1 No., for Small Corner - 1 No. & for Big Corner - 3 Nos. Legs: Plastic PP moulded legs are used & fitted at the bottom surface with the chipboard screws.

Supply ,Fitting & Fixing of Centre Table from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. MATERIAL-Top : Tempered Glass of 10 mm thickness Frame : Rubber wood in Walnut shade.Side Panels : MDF COATING : High Gloss PU SHADE. Glass Top : White. MDF panel : White. Frame : Walnut

Supply ,Fitting & Fixing of Corner Table from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Overall Size including top cornice: Width - DIA 450-mm, Thickness - 9 mm, Height - 540 mm, Depth – 320mm. Material: Temper glass, Thickness:9mm; Coating: Chrome

Supply ,Fitting & Fixing of Main Desk with ERU & Pedestal from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. The Main table shall be of size 3600 Width mm x 1080 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in Smart Case - space slides effortlessly in style.The mobile Pedestal shall be of size 480 Width mm x 640 Depth mm x 600 Height mm. Mobile pedestal shall be coated of MDF (medium density fiber ) with veneer coating and PU coating.The ERU Top shall be of MDF (medium density fiber) board duly finished with veneer and final PU coating. Size of ERU top 1900 Width mm x 480 Depth mm x 550(not from ground with castors).The main desk is provided eith the wire management system also there is perfect storage side unit .

Supply ,Fitting & Fixing of Very High Back Chair from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. seat/back assembly: the seat should be made up of 1.2 ± 0.1cm. thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. the back foam should be designed with contoured lumber support for extra comfort. Back size: 53.0cm.(w) x 95.4cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) the hr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thk hr steel and should be black powder-coated ( dft 40-60 microns ) armrest assy: the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. the armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s. e.r.w. support tubes and chrome plated. the p.u. armrest should be made of black integral skin polyurethane with 50-70 shore 'a' hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather the mechanism should be designed with the following features: 360° revolving type. seat back tilting ratio of 1 : 1.5. front pivot for tilt with feet resting on ground ensuring more comfort. tilt tension adjustment. 5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock should be released. static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. it has an adjustment stroke of 9.0 ± 0.3cm the bellow should be 1 piece and blow moulded in black polypropylene the pedestal should be made of die-cast aluminium with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon.

Supply ,Fitting & Fixing of Revolving Visitor Chair from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. The seat should be made up of 1.2 ± 0.1cm. thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. the back foam should be designed with contoured lumber support for extra comfort. Back size:53.0cm.(w) x 73.0cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) the hr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thk hr steel and should be black powder-coated ( dft 40-60 microns ) the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. the armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s. e.r.w. support tubes and chrome plated. the p.u. armrest should be made of black integral skin polyurethane with 50-70 shore 'a' hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather the seat base assy. should be designed with following features:360° revolving type without back tilt. It has an adjustment stroke of 12.0 ± 0.3cm the bellow should be 3 piece telescopic type and injection moulded in black polypropylene the pedestal should be made of die-cast aluminium with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon.

Supply ,Fitting & Fixing of Lounge Sofa from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Seat & Body: Understructure is made of combination of plywood & pinewood members. Plywood is 12 ± 1mm thk. [moisture resistance & termile proof as per IS:303] & pinewood are cross section [22x25, 22x40, 25x75 & 25x100mm] are without major knots & defects on the surface. 3mm MDF is stapled on the seat front. bottom vertical surface to get the surface to stick the foam. Dia. 3.8mm zigzag spring asly. is mounted on the seat structure with spring mounting plastic bracket for support & additional cushioning purpose. Elastic belt of 2" width are used above the spring asly. to give good sagging effect. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid the tearing of seat foam with the surface contact of metal spring. Back vertical surface is stapled with non-woven cloth to get surface to stick the foam. Complete understructure is made by gluing & stapling. Foam: Seat is made of PU foam with density 28 kg/m3 having an additional top layer of supersoft PU foam with density 18 kg/m3. Recron sheet of 230GSM is used above this foam. Seat front bottom vertical surface & back vertical surface is glued with the PU foam with density 22 kg/m3. Side vertical surface, body front taper vertical & top horizontal surface is glued with PU foam with density 16 kg/m3. Upholstry: Seat & body upholstry is made in the dual tone colour with fabric / fabric option & fabric / leatherite option. Back Top Cushion: Understructure: Understructure is made of combination 12±1mm & 6±1mm thk. plywood [for 2 Seater, 3 Seater & Chaise Lounge] & combination 12±1mm, 4±1mm thk. plywood & 3mm MDF [for Small Corner & Big Corner] with gluing & stapling. Foam: It is made with supersoft PU foam with density 18 kg/m3. Upholstry: It is upholstred with fabric. These back top cushions are fitted with the seat & body structure with the chipboard screws. Qty. of back top cushion fitted with each SKU as follows - for 2 Seater - 2 Nos., for 3 Seater - 3 Nos., for Chaise Lounge - 1 No., for Small Corner - 1 No. & for Big Corner - 3 Nos. Legs: Plastic PP moulded legs are used & fitted at the bottom surface with the chipboard screws.

Supply ,Fitting & Fixing of DRESSING TABLE with STOOL from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Table Dimension (H)1680mm x (W)1200mm x (D)450 mm. Stool Dimension (H)397mm x (W)510mm * (D)300mm. Leather Material (PVC/PU): PVC. Foam Thickness: 65 mm. Top Ply thickness: 15mm. Stool Material: Melamine + PVC. Foam Thickness: 65 mm

Supply ,Fitting & Fixing of Back Unit from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. The Size of the Back unit shall be 1000 mm width x 480 mm Depth x 2035 mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. The mobile unit can be bought in multiples.PU coating hardness 1.5H.

Supply ,Fitting & Fixing of Table With Wire Manager from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Senate Conference Table With Wire Manager size shall be Single seater 760 Width mm x 600 Depth mm , Two seater 1360 Width mm x 600 Depth mm , Half Round (2 Seater ) R 713 + Quarter Round ( 1 Seater ) R 713 . The top shall be 31.6 mm thick (18 mm + 12 mm + 0.6 mm DL ( both sides ) + 0.4 mm Membrane ) Edge Profile shall be waterfall edge 10 mm radius on top edge and 5 mm at bottom . In Understructure the Legs shall be made from 25 mm PPB having a straight profile with half round edges and clad with 0.6 mm thick post Forming laminate . Overall thickness of leg shall be 26.2 mm The modesty panel in understructure shall be mae from PLT ( Pre laminated twin) boards of 18 mm thick . There shall be Wire Management wire carrier shall be made from 0.6 mm thick CRCA painted and carrier cover shall be made of 12 mm thick MDF painted all over.

Supply ,Fitting & Fixing of Leatherette Visitor Chair from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification.SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 ; upholstered with synthetic leather over moulded High Resilience Polyurethane foam. SEAT SIZE: 49.0 cm. (W) x 51.4 cm. (D). TUBULAR VISITOR FRAME (Visitor Chair): The tubular frame is powder coated ( DFT 40-60 microns ) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. Tube with a connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly. Fixed Armrest Top is PU moulded over metal insert.

Supply ,Fitting & Fixing of King Bed from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Overall Size : Length- 2053.0 mm, Width- 1875.0 mm, Height- 1120.0 mm. Material: Bed Structure consist of metal frames made of M.S. 25 mm Square. Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness. Partition panels and plinths are made of 25 mm Thick Prelaminated Particle Board. Head board and Tail board are made of 25 mm thick P.V.C. membrane pressed MDF with 3D patterns as per approval from the Engineer in Charge. Side board , Mattress panels and Drawer panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges banded with 2 mm thick PVC edge banding.

Supply ,Fitting & Fixing of mattress from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Thickness 7.5cm/10cm/12.5. Tulip is made of a breathable rubberized coir base with DRC of 22% and with a cushioning foam layer on top for increased comfort.

Supply ,Fitting & Fixing of Pillow from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Dimensions: 43X69 cm. Designed to repel dust or micro-organisms due to its super fine fibres, Fresh promises a healthy and rejuvenating sleep environment.

Supply ,Fitting & Fixing of Bedside Table from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Overall Size : Depth - 450.0 mm. Width - 450.0 mm. Height - 517.0 mm. Material : Top panel of 25 mm and Drawer fronts of 18 mm PVC membrane pressed MDF with 3D patterns as per approval from the Engineer in Charge. Body and drawer panels are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC edge banding.

Supply ,Fitting & Fixing of Chest of Drawers from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Dimension: (H)1126mm x (W)610mm x (D)455mm. Material : Top panel of 25 mm and Drawer fronts of 18 mm PVC membrane pressed MDF with 3D patterns as per approval from the Engineer in Charge. Body and drawer panels are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC edge banding.

Supply ,Fitting & Fixing of TV Unit from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Overall Size including top cornice : Width - 1150.0 mm, Depth - 473 mm, Height - 830 mm. Material: Body panels are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC edge banding. Door are 18 mm thick made of 18 mm P.V.C membrane pressed MDF with 3D patterns as per approval from the Engineer in Charge. Drawer components are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC edge banding.

Supply ,Fitting & Fixing of 4 Door Wardrobe with Mirror from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Overall Size including top cornice : Width - 1761.0 mm Depth - 530.0 mm Height - 1910.0 mm. Material: Body panels are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC edge banding. Bigger Drawer fronts are made of 18 mm thick P.V.C. membrane pressed MDF with 3D patterns as per approval from the Engineer in Charge. Door panel & drawer components are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC edge banding. Body back and drawer bottom are made of 8 mm thick Prelaminated particle board. Mirror used on middle doors is 4 mm thick.

Supply ,Fitting & Fixing of 3 Seater Sofa from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Total Length-1750* Total Height- 760* Total Width- 870STITCHING: THREAD : Poly Proplin. LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9. Weight (GSM) : 575. FRAME MATERIAL (PINE WOOD): Moisture Content ( 10 – 12 %) : Less then 12%. Standard of Plywood used: {Required Standard : IS 303 Commercial Plywood} SEAT FOAM: (DENSITY, TYPE) Thickness (mm) : 69, 22 & 10 mm Density (Kg/m3): BACK FOAM: (DENSITY, TYPE) Thickness (mm) : 45 mm, Density (Kg/m3): 28 d ARMREST FOAM: (DENSITY, TYPE) Thickness (mm) : 45 mm Density (Kg/m3): 26 d BELT/ WEBBING MATERIAL: Width of belt (mm) : 68mm - 48mm Total length of belt used (mm): 68mm :- 2500mm (2) 48mm :- 2000mm LEG MATERIAL:* Fixing of Leg : (Self Tapping Screw / Insert with metric threading) :- Woodscrew provided on frame in addition to M-8 / T-Nut* Material of leg : (Plastic / Insert Moulding / Wooden/ MS / SS) :- Plastic * Bush for Leg bottom : (PVC bush / Felt Pad) :- Pvc. Bush BONDING SOLUTION: STAPLING PINS: * Size of Pin : (Zinc Plated) * No. Of Pins : 80/12 :- 1100 , 90/35 :- 95 , 100/50 :- 70

Supply ,Fitting & Fixing of 1 Seater Sofa from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Total Length- 920* Total Height- 760* Total Width- 870STITCHING: THREAD : Poly Proplin. LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9. Weight (GSM) : 575. FRAME MATERIAL (PINE WOOD): Moisture Content ( 10 – 12 %) : Less then 12%. Standard of Plywood used: {Required Standard : IS 303 Commercial Plywood SEAT FOAM: (DENSITY, TYPE) Thickness (mm) : 69, 22 & 10 mm Density (Kg/m3): BACK FOAM: (DENSITY, TYPE) Thickness (mm) : 45 mm Density (Kg/m3): 28 d ARMREST FOAM: (DENSITY, TYPE) Thickness (mm) : 45 mm Density (Kg/m3): 26 d BELT/ WEBBING MATERIAL: Width of belt (mm) : 68mm - 48mm,Total length of belt used (mm): 68mm :- 2500mm (2) 48mm :- 2000mm LEG MATERIAL:* Fixing of Leg : (Self Tapping Screw / Insert with metric threading) :- Woodscrew provided on frame in addition to M-8 / T-Nut * Material of leg : (Plastic / Insert Moulding / Wooden/ MS / SS) :- Plastic* Bush for Leg bottom : (PVC bush / Felt Pad) :- Pvc. Bush BONDING SOLUTION: STAPLING PINS:* Size of Pin : (Zinc Plated) * No. Of Pins : 80/12 :- 1100 , 90/35 :- 95 , 100/50 :- 70

Supply ,Fitting & Fixing of Centre Table from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Dimension: 1000x 650 x 450 mm. TABLE LEGS should be made of MDF with PU finish of 5H hardness. TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm); L X W X T-1000x650x10mm

Supply ,Fitting & Fixing of 2 Door Wardrobe from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Overall Size including top cornice : Width - 1761.0 mm Depth - 530.0 mm Height - 1910.0 mm. Material: Body panels are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC edge banding. Bigger Drawer fronts are made of 18 mm thick P.V.C. membrane pressed MDF with 3D patterns as per approval from the Engineer in Charge. Door panel & drawer components are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC edge banding. Body back and drawer bottom are made of 8 mm thick Prelaminated particle board. Mirror used on middle doors is 4 mm thick.

Supply ,Fitting & Fixing of Shoe Cabinet from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Length:800mm. Width:395mm. Height:490 Mm. Carton Specs: 5 Ply. Carton Size (Each Carton): L X W X H ( Carton 1) : In Mm-840x430x140. Melamine Lamination On Particle Board (Color : Honey) Top PVC (& Foam) Cushion

Supply ,Fitting & Fixing of Almirah from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Storwel plain shall have an overall size of 916mm(W) x486mm (D) x 1980mm(H) with welded construction. It should have the shelf thick- ness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.

Supply ,Fitting & Fixing of Lounge Sofa from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Seat & Body: Understructure is made of combination of plywood & pinewood members. Plywood is 12 ± 1mm thk. [moisture resistance & termile proof as per IS:303] & pinewood are cross section [22x25, 22x40, 25x75 & 25x100mm] are without major knots & defects on the surface. 3mm MDF is stapled on the seat front. bottom vertical surface to get the surface to stick the foam. Dia. 3.8mm zigzag spring asly. is mounted on the seat structure with spring mounting plastic bracket for support & additional cushioning purpose. Elastic belt of 2" width are used above the spring asly. to give good sagging effect. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid the tearing of seat foam with the surface contact of metal spring. Back vertical surface is stapled with non-woven cloth to get surface to stick the foam. Complete understructure is made by gluing & stapling. Foam: Seat is made of PU foam with density 28 kg/m3 having an additional top layer of supersoft PU foam with density 18 kg/m3. Recron sheet of 230GSM is used above this foam. Seat front bottom vertical surface & back vertical surface is glued with the PU foam with density 22 kg/m3. Side vertical surface, body front taper vertical & top horizontal surface is glued with PU foam with density 16 kg/m3. Upholstry: Seat & body upholstry is made in the dual tone colour with fabric / fabric option & fabric / leatherite option. Back Top Cushion: Understructure: Understructure is made of combination 12±1mm & 6±1mm thk. plywood [for 2 Seater, 3 Seater & Chaise Lounge] & combination 12±1mm, 4±1mm thk. plywood & 3mm MDF [for Small Corner & Big Corner] with gluing & stapling. Foam: It is made with supersoft PU foam with density 18 kg/m3. Upholstry: It is upholstred with fabric. These back top cushions are fitted with the seat & body structure with the chipboard screws. Qty. of back top cushion fitted with each SKU as follows - for 2 Seater - 2 Nos., for 3 Seater - 3 Nos., for Chaise Lounge - 1 No., for Small Corner - 1 No. & for Big Corner - 3 Nos. Legs: Plastic PP moulded legs are used & fitted at the bottom surface with the chipboard screws.

Supply ,Fitting & Fixing of Centre Table from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. MATERIAL-Top : Tampered Glass of 10 mm thickness. Frame : Rubber wood in Walnut shade. Side Panels : MDF. COATING : High Gloss PU, SHADE Glass Top : White, MDF panel: White, Frame : Walnut.

Supply ,Fitting & Fixing of Display Unit from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Dimension of Expo Small Display Unit is (W)1500 x (D)400 x (H)754 mm

Supply ,Fitting & Fixing of Book Shelf from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Dimension of Cubes Book Shelf is (W)1050mm x (D) 350mm x (H)2100 mm

Supply ,Fitting & Fixing of Dining Table from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. MATERIALS & DIMENSION (+/- 2mm) - 1600 * 900 * 480 .TABLE LEGS METERIALS & SIZE : centarl pillar 485(l)x310(w)x640(t)mm. Color : MDF with black color high gloss. Bottom board support： 850(l)x480(w)x50(t)mm.Color : MDF with black color high gloss. TABLE TOP MATERIALS & SIZE : (DENSITY / TYPE)- temper glass 1594x894x5 mm. Color :- Temper glass with black. board 1600x900x50mm. Color : MDF with High gloss and around with powder in silver .

Supply ,Fitting & Fixing of Dining Chair from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Dimension of Chair is 44.5cm(w)*41.5cm(d)*96 cm(h).

Supply ,Fitting & Fixing of Main Desk from ISO 9001:2015, ISO 14001, ISO 45001:2018, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification. Mayfair Main Desk size shall be 1350 Width x 750 Depth x 750 Height.The Top shall be in white cedar and black and shall be 18 mm PLB with PVC lipping.The side panels shall be 18 mm thickPLT with PVC .The Modesty panel shall be 18 mm thick PLT.The Modesty panel shall be in a combination of black & white cedar.

Supply & placement of Small Storage Unit as per approved drawing & design / specification of EIC ..Storage Small-3'x1.5'x2.5'.The quoted product should be from a certified member of BIFMA(Certificate to be enclosed) and should be following managment systems as per ISO 9001:2015, ISO 14001:2004, OHSAS 18001:2007 ,AIOTA, Greenguard Certification(Certificate to be enclosed) procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products.

Godrej and Boyce Mfg. Co. Ltd.

WELL DECOR