NIT-46 f 2020-21 REPAIR/MAINTENANCE OF PUMPS, MOTORS, STARTERS, CONTROL PANEL, RELAY, FILTERATION PLANT, RO, SOLA WATER HEATING SYSTEM, CLEANING OF WATER TANK OF VARIOUS CAPACITIES, SUMMER APPLIANCES AND MISC CONNECTED ITEMS AT RAMBAN, BANIHAL, PATNI

Amount

Material and labour for taking out Motor Set of capacity 10 H.P to 12.5 HP from position and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of motor set after necessary repairing on the existing foundation and making electrical connections including necessary nuts, bolts, washers etc., required at site of work, complete all as specified & directed Note : All spares parts required shall be measured and paid for separately

(a) Supply only Ball Bearing of suitable size

(b) Supply only Rubber washer of suitable size

(c ) Supply only Packing sheet of suitable size

(d) Supply only Bush cover of suitable size

(e) Supply only Mechanical Seal of suitable size

(f) Supply only Circlips Clamp of suitable size

Material and labour for taking out Motor Set of capacity 5 H.P to 7.5 HP from position and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of motor set after necessary repairing on the existing foundation and making electrical connections including necessary nuts, bolts, washers etc., required at site of work, complete all as specified & directed Note : All spares parts required shall be measured and paid for separately

(a) Supply only Ball Bearing of suitable size

(b) Supply only Rubber washer of suitable size

(c ) Supply only Packing sheet of suitable size

(d) Supply only Bush cover of suitable size

(e) Supply only Mechanical Seal of suitable size

(f) Supply only Circlips Clamp of suitable size

Material and labour for taking out Motor Set of capacity 1 H.P to 3 HP from position and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of motor set after necessary repairing on the existing foundation and making electrical connections including necessary nuts, bolts, washers etc., required at site of work, complete all as specified & directed Note : All spares parts required shall be measured and paid for separately

(a) Supply only Ball Bearing of suitable size

(b) Supply only Rubber washer of suitable size

(c ) Supply only Packing sheet of suitable size

(d) Supply only Bush cover of suitable size

(e) Supply only Mechanical Seal of suitable size

(f) Supply only Circlips Clamp of suitable size

Material and labour for rewinding of damaged/burnt motor of capacity 1 H.P to 12.5 H.P any type by using enamelled copper wire of superior quality of existing grade and same Nos. of turns including varnishing ‘F’ class insulation and drying in heat chamber / oven including all other material / fittings and testing on completion, complete all as specified & directed.

Material and labour for taking out Centrifugal Pump of capacity 10 HP to 12.5 H.P and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of pump set after repair on the existing foundation and making electrical connections complete all as specified and directed Note : All spares parts required shall be measured and paid for separately

(a) Pump overhauling GM bushes, shaft rematteling making key gland packing,incl all engineering work.

(b) Pump shaft stainless steel of same make and model duly grinded/polished

(c) Bearing of suitable size of pump

(d) Plugging leaks in casing by welding the same incl grinding for smooth surface

Material and labour for taking out Centrifugal Pump of capacity 1 HP to 7.5 H.P and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of pump set after repair on the existing foundation and making electrical connections complete all as specified and directed Note : All spares parts required shall be measured and paid for separately

(a) Pump overhauling GM bushes, shaft rematteling making key gland packing,incl all engineering work.

(b) Pump shaft stainless steel of same make and model duly grinded/polished

(c) Bearing of suitable size of pump

(d) Plugging leaks in casing by welding the same incl grinding for smooth surface

Supply and fixing in replacement of CI Non Return Sluice Valves ISI Marked flanged class 1.6 PN with by-pass arrangement and necessary bolts and nuts of suitable size with and including rubber gasket for flanged joints and testing including taking out old unserceable non return valves complete of following sizes :- Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / ZOLOTO

(a) 150 mm bore

(a) 100mm bore

(b) 80mm bore

Supply and fixing in replacement of CI Sluice Valves ISI Marked flanged class 1.6 PN with necessary bolts and nuts of suitable size with and including rubber gasket for flanged joints and testing including taking out old unserviceable sluice valves complete of following sizes :- Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / ZOLOTO

(a) 150 mm bore

(a) 100mm bore

(b) 80mm bore

Supply and fixing in replacement of Gun metal globe, Ball or gate valve class-2 with iron wheel head screwed both ends for pipes of following sizes complete including taking down old unserviceable gate valves all as specified and directed :- Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / LEADER / ZOLOTO

(a) 80 mm bore

(b) 63 mm bore

(c) 50mm bore

(d) 40 mm bore

(e) 25 mm bore

(f) 20 mm bore

Supply and fixing in replacement of Cast Iron Foot Valve, conforming to IS-4038, complete suitable for pipes of following sizes complete including taking down old unserviceable foot valve all as specified and directed :- Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / LEADER / ZOLOTO

(c) 80 mm bore

(a) 63 mm bore

(b) 50 mm bore

Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated soils not exceeding 50 metres and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.

Taking up or down steel tubing & connection incl cleaning for re fixing and removal to site of following sizes complete includingtaking down old unserviceable gate valves all as specified and directed :-

(a) 100 mm bore

(b) 80 mm bore

(c ) 50 mm bre

(d) 40 mm bore

(e) 25 mm bore

(f) 20 mm bore

Supply and fixing in replacement of Galavised iron tubing (GI), medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminshing pieces, caps, plugs and unions etc., laid in trenches / fixed to walls and ceilings or laid in floors, complete all as specified and as directed of the following description :- Make : JINDAL PIPES / TATA / BST / PRAKASH SURYA

(a) 100 mm bore

(b) 80 mm bore

(c ) 50 mm bre

(d) 40 mm bore

(e) 25 mm bore

(f) 20 mm bore

M&L in replacement Gland for pump set capacity 2 HP to 20 HP complete all as specified and directed by Engr-in-Charge.

Supply only High Strength Calcium based granular disinfectant for water treatment, more stable than chlorine gas, and stronger than Bleaching Powder and Sodium Hypochlorite of following specifications :- (a) Chemical analysis & physical observations : Description : Whitish granules of granular size (Mesh passing through – 100 BSS) : 1.1 (± 0.1) %, Water / moisture : 5.00 (± 0.2) % Other insoluble Calcium salts: 1.1 (± 0.1) % Mercury and other Heavy Metal contaminants : BDL (The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems)

(b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh litres of water : Requirement must be 100 gm. per one lakh litre of water to achieve 05-1.0 ppm Av. Cl. at injection point (Site and raw water quality variations may apply additionally). (c) Stability : Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. Make : Purichlore / Mark Daxter / ALTOCH-Gp (Declivace Technologies Pvt Ltd) / Any E-in-C approved Make

Supply only Hypochlorous Acid (HOCL) for chlorination of drinking water disinfection solution having high residual effect, clear colour less and potent germicide non corrosive and non foaming stable up to 100° C for drinking water as and when required in HDPE jericanes of 35 Litres capacity having the following features : (a) Potent germicide (b) Slim control (c) High residual effect to avoid contamination (d) Less hazardous (e) Work at low dosage in post disinfection (f) No after taste (g) Most reliable in operation (h) Eco friendly and biodegradable Make : Penta Water Treatment / Seacolor/ Hygene Maddox People Care / Super-Chlor Total

Supply of Potassium aluminum sulfate, clear in colour of class 1 quality suitable for purification of raw water all as specified and directed by Engr-in-Charge.

Supply only Bleaching powder class 1 qualiity all as specified and directed by Engr-in-Charge.

Supply only Lead pig superior quality all as specified and directed by Engr-in-Charge.

Supply only Lead wool superior quality all as specified and directed by Engr-in-Charge.

Draining out water from RCC overhead water storage tank of capacity 90,000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from sedimentation tank of capacity 80000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from Mild Steel water storage tank of capacity 50000 / 60000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from underground water storage tank of capacity 45000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose,removing all scale,dirt,algae,vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from clear water tank of capacity 40000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from underground / semi underground water storage tank of capacity 30000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from PVC water storage tank of capacity 10000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing aftercleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from PVC water tank of capacity 5000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from PVC overhead water tank of capacity ranging from 300 Ltrs to 1000 Ltrs placed at different locations at Ramban, Banihal & Patnitop, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water, cleaning walls and floors by scratching with wire brushes all as specified and directed. Note for Serial Item No 27 to 35 : 1. The 'Date of Cleaning' and 'Due on' shall be written with synthetic enamel paint prominently on the tanks cleaned all as directed by the Engr-in-Charge. The quoted rate shall be deemed to be inclusive of this aspect. 2. The T&P required for cleaning of the tanks is deemed to be included in the unit rate quoted by the contractor.

Taking out old unserviceable filter media from existing gravity type filter, cleaning the filter thoroughly from inside, outside and channel all around, taking out sludge and throwing the same in low lying area including replacing filter media with new filter media all as specified and directed by Engineer-in-Charge. NOTE :-- Supply only new filter media shall be measured & paid for separately as under :-

Supply only filter media of size as mentioned below :-

a) Course aggregate of size 40-50mm

b) Course aggregate of size 20-40mm

c) Course aggregate of size 10-20mm

d) Course aggregate of size 05-10mm

e) Course sand suitable for filter plant

Repair/servicing of chemical dosing electric operated of make Renuka Tech Model RWT-DLX-0003, at site with the replacement of following unserviceable spares installed at water supply installation. Note : All spares parts required shall be measured and paid for separately as supply only under following items of Sch ‘A’

(a) Supply only non return valve of suitable size complete all as specified.

(b) Supply only complete set of inlet and outlet pipe for chemical dosing pump complete all as specified.

(c ) Supply only foot valve with strainer, 75 mm long complete all as specified

(d) Supply only regulator with marking from 1 to 10 to control discharge of HOCL complete all as specified.

(a) Three Pole contactor AC operated of capacity 12 Amp, 5.5 HP, 5.5 KW rating 415 V - 01 Nos Make : ABB, Product code No A-12-30-10 (b) Three pole contactor AC operated of capacity 32 Amp, 20 HP, 15 KW rating 415 V - 01Nos Make : ABB, Product code No A-30-30-01

Submersible flat cable PVC insulated and PVC sheathed LT 1100 volts grade with copper conductor of size 10 Sqmm 3 Core, complete all as specified and directed. Make : Havells / Finolex / Polycab / Plaza / Asian

Submersible flat cable PVC insulated and PVC sheathed LT 1100 volts grade with copper conductor of size 16 Sqmm 3 Core, complete all as specified and directed. Make : Havells / Finolex / Polycab / Plaza / Asian

Supply only PVC Flexible pipe of size 80mm as complete as specified and as directed by the Engr-in-Charge

Supply only PVC Flexible pipe of size 63mm as complete as specified and as directed by the Engr-in-Charge

ON LOAD Change Over Switch 415 volt in sheet metal enclosure Three Pole of capacity 100 Amps complete all as specified and directed

ON LOAD Change Over Switch 415 volt in sheet metal enclosure Four Pole of capacity 200 Amps complete all as specified and directed

Dismantling and refixing the complete unit of solar water heater installed at various sites complete overhauling, cleaning, servicing all serviceable accessories including repairing/ replacing of all defective parts such as nuts, bolts, wasahers and all other minor accessories as required at site including painting to solar water heater by rubbing the old paint and applying with two coats of synthetic enamelled paint by spray painting and testing the same after repair, complete all as specified and directed of the following description. Note: Replacement of spares shall be measured and paid for seperately.

a) Capacity 300 LPD

b) Capacity 500 LPD

c) Capacity 1000/2000 LPD

Supply only the following items / spares in replacement for Solar Heaters of various capacities as mentioned in Serial No 46 here-in-before all as specified :-

(a) Heating element of capacity upto 2 KW (Electric rod) having rubber washer of size 1 ¼” or 1 ½” complete all as specified.

(b) Glycol (Anti freezing solution) for filling in copper tubes complete all as specified.

(c) Dead flange with nut, bolts and washers complete all as specified.

(d) Float valve assembly 15mm dia complete all as specified.

(e) Thermostat suitable for solar heater complete all as specified

(f) Hot water steel tank non stick 2mm thick with ceramic lining of capacity 300 Litres each including making necessary connections complete all as specified. Make : Surya Shakti / TATA BP or equivalent.

(g) Hot water steel tank non stick 2mm thick with ceramic lining of capacity 500 Litres each including making necessary connections complete all as specified. Make : Surya Shakti / TATA BP or equivalent.

(h) Hot Water Steel Tank non stick 2mm thick with ceramic lining of capacity 1000 Litres each including making necessary connections complete all as specified Make : Surya Shakti / TATA BP or equivalent.

S&F in repair G.I elbow for 50 mm dia pipe, complete all as specified and directed.

S&F in repair G.I elbow for 80 mm dia pipe, complete all as specified and directed.

S&F in repair G.I union for 50 mm dia pipe, complete all as specified and directed.

S&F in repair G.I union for 80 mm dia pipe, complete all as specified and directed.

M&L testing & Commissioning of LT pannel frame CPRI approved, indoor type,factory made fabircated to CRCA sheet of with min 1.6 mm thickness, double door front/rear opening and locking arrangement, floor mounted on plateform of suitable size, aluminium bus bar chember (enclosed) with two coat of synthetic enamel paint over a coat of red oxide primer mounted on PCC blocks, fixed with grouted bold,nuts and washer and making complete connection in all respects as diected by engr-in-charge comprising of foillowing parts:- INCOMER :- (a) MCCB 125 Amp, FP, Thermal Magnetic release, 35 KA - 01 No as incomer OUTGOING :- (a) MCCB 63 Amp, TP, Thermal Magnetic release, 25 KA, 415 Volts - 02 Nos (b) MCCB 40 Amp, TP, Thermal Magnetic release, 25 KA, 415 Volts - 01 Nos (c) MCB SPN 32 Amps - 01 Nos (d) Indicating lamps (Set of 03 Nos) - 01 Set.

M&L testing & Commissioning of LT pannel frame CPRI approved, indoor type,factory made fabircated to CRCA sheet of with min 1.6 mm thickness, double door front/rear opening and locking arrangement, floor mounted on plateform of suitable size, bus bar chember (enclosed) with two coat of synthetic enamel paint over a coat of red oxide primer mounted on PCC blocks, fixed with grouted bold,nuts and washer and making complete connection in all respects as diected by engr-in-charge comprising of foillowing parts. :- INCOMER :- (a) MCCB 100 Amp, FP, Thermal Magnetic release, 35 KA - 01 No as incomer OUTGOING :- (a) MCCB 63 Amp, TP, Thermal Magnetic release, 25 KA, 415 Volts - 02 Nos (b) MCCB 40 Amp, TP, Thermal Magnetic release, 25 KA, 415 Volts - 01 Nos (c) MCB SPN 32 Amps - 01 Nos (d) Indicating lamps (Set of 03 Nos) - 01 Set.

Replacement of MCCB 200 Amps 4 Pole 25 KA, Fixed Thermal and fixed magnetic setting fixed in existing panel and connected to told existing cable including necessary fixing arrangement lugs, glan etc complete including takiing down old all as specified and as directed.

Replacement of MCCB 160 Amps 4 Pole 35 KA, Fixed Thermal and fixed magnetic setting fixed in existing panel and connected to told existing cable including necessary fixing arrangement lugs, glan etc complete including takiing down old all as specified and as directed.

Replacement of MCCB 100 Amps 3 Pole 35 KA, Fixed Thermal and fixed magnetic setting fixed in existing panel and connected to told existing cable including necessary fixing arrangement lugs, glan etc complete including takiing down old all as specified and as directed.

Replacement of MCCB 63 Amps 3 Pole 25 KA, Fixed Thermal and fixed magnetic setting fixed in existing panel and connected to told existing cable including necessary fixing arrangement lugs, glan etc complete including takiing down old all as specified and as directed.

S&F MCB SPN 40 Amps 'C' series 240V 50Hz 10 KA suitable for lighting and other domestic loads complete including taking down all as specified and directed by Engr-in-charge.

S& F MCB TPN 63 Amps 'C' series 415V 50Hz 10 KA suitable for lighting and other domestic loads including taking down all as specified and directed by Engr-in-charge.

Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly to ground vertically to a depth not less than 2.25 Mtr below the ground level with top edge of earth plate not less than 1.65 Mtr below normal ground level connected to GI strip 32 x 6 mm size and earthing lead protected with 50 mm bore GI pipe, light grade, filling around with charcoal dust and salt including excavation, returning, filling of earth and disposal of surplus soil to a distance not exceeding 50 mtr and connected to GI strip by means of GI nuts, bolts and washers strip connected to earth plate including chamber PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate in concrete pit pre-cast RCC 40 mm thick reinforced with 6 mm dia round at 75 mm C/C both way with 12 mm dia mild steel plain bar lifting handle 2 Nos funnel with wire mesh 20 mm dia GI pipe light grade watering pipe and frame work complete all as shown in electrical plate No. 3 of SSR Part-I 2009 including testing on completion complete all as specified and as directed.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.

Taking down carefully AC ceiling fan 1200mm/1400mm sweep, exhaust fan 300mm to 450mm sweep from their position complete for servicing such as removing dust and dirt from fan motor, washing blades with detergent powder including greasing to bearing, checking & replacing worn out screws with spring washers, rubber befit washers of fan blades, fan motor body, spilt pin/screw for fan down rod/check nuts as required for different makes of ceiling/exhaust fans to put fans fans to smooth and satisfactory working and refixing ceiling fan/exhaust fan after executing necessary servicing to their position connecting to electric system with suitable size of cable and testing, complete all as specified & directed. Note : Rates quoted by contractor shall deemed to be inclusive all minor items and no extra payment shall be admissible except for the items which are to be replaced which shall be measured and paid separately under respective item of Schedule 'A'.

Material and labour for rewinding of AC ceiling fan, 230 volts, 50 Hz, 1200mm sweep of any make with appropriate gauge super enamelled copper winding wire including allied insulation material such as air drying insulation varnish, cotton tapes, lathered film paper, spacers, sleeves etc re-assembling at its position after repair, testing and commissioning, complete all as specified & directed.

Material and labour for rewinding of exhaust fan, 230 volts, 50 Hz, 450mm sweep of any make with appropriate gauge super enamelled copper winding wire including allied insulation material such as air drying insulation varnish, cotton tapes, lathered film paper, spacers, sleeves etc re-assembling at its position after repair, testing and commissioning, complete all as specified & directed.

Supply & fixing ball bearing 6202/6203 in replacement suitable for AC ceiling fan of 1200/1400mm sweep/ exhaust fan/ air circulation fan of any make to replace the unserviceable bearing including greasing as required, complete all as specified & directed.

Supply & fixing in replacement capacitor, 4 mfd 230 volts, AC, 50 Hz, complete all as specified & directed.

Supply & fixing in replacement capacitor, 2.5 mfd 230 volts, AC, 50 Hz, complete all as specified & directed.

Supply & fixing in replacement fan canopy, complete all as specified & directed.

Taking down carefully Geyser of capacity 25/35 ltrs from its position for repair/servicing such as removal of dust, checking, replacing worn out parts, rubber etc, re-assembling at its position after repair, testing & commissioning & connecting to electric system with suitable size cable, complete all as specified & directed. Note : Rates quoted by contractor shall deemed to be inclusive all minor items and no extra payment shall be admissible except for the items which are to be replaced which shall be measured and paid separately under respective item of Schedule 'A'.

Supply & fixing galvanized iron water tubing, medium grade, 15mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors, complete including taking down all as specified and directed.

Supply & fixing galvanized iron water tubing, medium grade, 20mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors, complete including taking down all as specified and directed.

Supply & fixing in replacement geyser tank (ISI marked) of capacity 25 ltrs, complete all as specified & directed.

Supply & fixing in replacement geyser tank (ISI marked) of capacity 35 ltrs, complete all as specified & directed.

Supply & fixing in replacement heating element for geyser, 1500 watt, round type, complete all as specified & directed.

Supply & fixing in replacement heating element for geyser, 2000 watt, round type, complete all as specified & directed.

Supply & fixing in replacement heating element for geyser, 1500 watt, triangle type, complete all as specified & directed.

Supply & fixing in replacement heating element for geyser, 2000 watt, triangle type, complete all as specified & directed.

Supply & fixing thermostat suitable for geyser of any capacity, complete all as specified & directed.

Supply & fixing stop valves, 15mm bore, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repair, complete all as specifed & directed.

Supply & fixing Bib tap, 15mm bore, fancy type, chromium plated , cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, fixed in repair, complete all as specified & directed.

Supply & fixing PVC connection 15mm dia, 900mm long with brass CP nuts and washers at both ends for hot water & Cold Water , fixed in repair, complete all as specified & directed.

Ceiling Fan 1200mm sweep, five star energy saving BEE rating, and making connection with three core 23/0.0076 size twisted flexible copper conductor cable upto ceiling rose complete all as specified and directed. Make : Havells / Bajaj / Usha / Crompton / Khaitan.

Storage water heater (Geyser), vertical type, of 25 ltr capacity of inner tank, outer tank, syphon assembly, thermostat heating element, safety valve etc complete all as per manufacturer design and specifications including making of all fixing arrangements complete having BEE Five Star Rating including grouting of nuts and bolts and necessary PCC work as specified and directed by Engineer-in-Charge. Make:- VENUS 'SPLASH 02 GL' / RACOLD 'ETERNO 2 25 V' / BAJAJ 'MAJESTY 25L GMU' / HAVELLS 'PURO PLUS 25L'

Taking down/out Deepfreezer/Refrigerator from 261 Transit Camp, transporting to contractor's workshop for carrying out repairs, taking out assembly, welding/brazing after detecting the leakage, as mentioned in respective items of Schedule including transporting back after repair, re-fixing at site, making it functional after replacement of worn out nuts, bolts, washer etc. including re-connecting electrical connection and testing, complete all as specified & directed. Note :- Cost of material and labour for providing new items shall be measured and paid for separately under relevant items of Sch 'A'.

Taking down/out Water Cooler of 40/80 ltrs and 60/120 ltr capacity from 261 Transit Camp, transporting to approved workshop for carrying out repairs, taking out assembly, welding/brazing after detecting the leakage, as mentioned in respective items of Schedule including transporting back after repair, refixing at site, making it functional after replacement of worn out nuts, bolts, washer etc. including re-connecting electrical connection testing complete all as specified & directed. Note :- Cost of material and labour for providing new items shall be measured and paid for separately under relevant items of Sch 'A'.

Material & labour for preparation of old painted surfaces by scrubbing, cleaning with sand paper/wire brush etc making good surfaces and repainting by applying two coats of synthetic enamelled first quality paint using spray gun over over one coat of red oxide zinc chrome primer and marking Srl No SM No / MES No with black paint of following items :-

(a) Deep freezer

(b) Refrigerator upto 320 Litres capacity

(c) Water Cooler

Supply and fixing in replacement of following unserviceable items of Deepfreezer/refrigerator of 300/310/320 litres as required at site including testing of the same, complete all as specified & directed :-

(a) MS condensing coil with fixing arrangement for 300/310/320 litres capacity complete with gas charging.

(b) Over load protector. Make : Voltas/ Whirlpool/ LG/ Samsung

(c ) Thermostat switch (Auto defrost). Make : Voltas/ Whirlpool/ LG/ Samsung

(d) Temp control knob with defrost push button. Make : Voltas/ Whirlpool/ LG/ Samsung

(e) Electrical lamp pin/threaded type 15 watt, 240 volts AC supply. Make : Voltas/ Whirlpool/ LG/ Samsung

(f) PVC ice tray of superior quality. Make : Voltas/ Whirlpool/ LG/ Samsung

(g) Relay as per existing. Make : Voltas/ Whirlpool/ LG/ Samsung

Supply, fixing and testing new compressor, single phase, 240 Volts, AC supply in replacement including cost of rubber bushes, bolts, nuts washers, copper tubing capillary tube, dryer filter terminal cover, thimbles, electrical wiring oil and gas charging (R-134 or as recommended by manufacture) and testing complete for the following including transportion etc :-

(a) Compressor of Deepfreezer/Refrigerator of capacaity 300/310 Litres. Make : Voltas/ Whirlpool/ LG/ Samsung

(b) Compressor of Water Cooler of capacaity 300/310 Litres. Make : Voltas/ Whirlpool/ LG/ Samsung

Supply and fixing in replacement of following unserviceable items by opening of water cooler of 40/80 or 60/120 Ltrs capacity frost free for following replacement of unserviceable accessories and refixing, connecting and testing complete all as specified & directed :-

(a) Copper Condensing coil complete with fixing arrangement.

(b) Fan motor 1/20 HP, 240 volts, single phase AC supply.

(c ) Aluminium Blade for fan motor complete blower.

(d) Thermostat. Make: Voltas/ Bluestar/ Shriram (Usha)

(e) Relay. Make: Voltas/ Bluestar/ Shriram (Usha)

(f) Over load protector. Make: Voltas/ Bluestar/ Shriram (Usha)

(g) Float Valve brass 15 MM bore.

Supply and filling/charging of following water collers/Deepfreezer with refrigerant R-134 or as recommended by manufacturer including flushing out oil, vacuming, top up oil, brazing, leak detection, testing etc for following cooling appliances including replacement of capillary tube and dryer filter :- Note:-. The type of refrigerant gas shall be charged as per manufacturer recommendation.

(a) Water cooler 60/120 litres capacity.

(b) Deep Freezer/Refrigerator of capacity 320 Litres.

Taking down defective Split AC of 1.5 Ton capacity from any height and any places for repair and refixing at its original place after replacement of defective/wornout parts & making serviceable, complete all as specified & directed. Note:- Worn out spares parts required for making AC serviceable/functional shall be measured and paid separately under appropriate item as 'Supply only'.

(a) Supply only fan motor for 1.5 ton AC. Make. Voltas/ Hitachi/ Daikin/ Carrier/ Fedders Llyod/ Whirlpool

(b) Supply only AC compressor for 1.5 ton AC. Make. Voltas/ Hitachi/ Daikin/ Carrier/ Fedders Llyod/ Whirlpool

(c ) Supply only gas 22 R for 1.5 ton AC.

(d) Supply only AC copper pipe of size 8mm and 15 mm for 1.5 ton AC.

(e) Supply only 45 Mfd capacitor for 1.5 ton AC. Make. L&T/ ABB/ Siemens/ Schneider/ GE.

(f) Supply only contactor, single phase, 30 Amp for 1.5 ton AC. Make. L&T/ ABB/ Siemens/ Schneider/ GE.

(g) Supply only fan belt for 1.5 Ton AC.

M/S BALI CONSTRUCTIONS

LUXMI ELECTRONIC WORKS

SWASTIK TRADERS

Bidder Name

M/S BALI CONSTRUCTIONS

SWASTIK TRADERS

LUXMI ELECTRONIC WORKS

DAVINDER SINGH