Supply And Installation Of Puff Panels and Doors for Shivtej FPC, Pune

Amount

SUPPLY & INSTALLATION OF PUFF PANELS & DOORS Insulated Panels for all cold rooms - PUF insulation core thickness : as required in BOQ supply should include all flashings, U profile, Inner flashing’s, hanging rods, hat channels and all such necessary installation material and Transportation, Density = 40 + 2 Kg/M3, Closed cell content = 90 - 95%, Thermal Conductivity = [K of 0.023 W/m deg K (AGED)], Dimensional Stability = 60 to + 100°C, Vapour Permeability = Very Low, Surface spread of flame = Class I to BS:476 Pt., Ignitability = conforming to BS: 476 Part.5, Flammability = conforming to IS:11239 , Environmental acceptance = CFC Free, Outer Skin [Body Sheet] = 0.5 mm GI Colour coated Galvanised sheet, Inner Skin [Body Sheet] = 0.5 mm GI Colour coated Galvanised sheet, Jointing [Panel to Panel] = Tongue Groove Configuration - Continuous Type only

SUPPLY & INSTALLATION PUFF PANELS FOR PRE COOLING ROOMS [3 No.]

Automatic Continuous 100 mm WALL CLADDING PANELS with (lightly grooved on both sides) made out of JSW Exterior sheet. 240 Mpa, 120 GSM, Zinc coating Pre-Painted with 20 microns, REGULER MODIFIED POLYSTER over 5 microns Primer and back coat shall be 6 to 8 Microns and JSW interior sheet. Panels will be with guard film in between, PUF Foam (BASF Germany) at a density of 40+/-2 kg/m3 as core (CFC /HCFC Free 4 Pentane Blown Zero ODP Product). 468 Sq. Mtr

50mm THK - PUF Floor Slab Both side 0.15mm craft paper Density 40 Kg/Cum.165 Sq. Mtr

Single leaf Hermetically Sealed Horizontal Chiller Sliding Door. With Aluminium Door Profile for positive application up till +0 degree. PUF Panel Insulation, PCGI sheet thickness 0.6 mm, 80 mm door thickness, for clear opening dimension 1800 mm Width and 2700 mm Height with C-flushing, Aluminium Wall frame and Counter Wall Frame. (Metaflex Make)

Accessories T Section, all flashing, Silicon Sealants and PUF Chemicals for Sealing and Screws, Rivets, 200 micron Poly sheet. Accessories T Section, all flashing, Silicon Sealants and PUF chemicals for Sealing and Screws, Rivets, 200 micron Poly sheet.

SUPPLY & INSTALLATION PUFF PANELS FOR PRE COLD ROOMS [2 No.]

Automatic continuous 100 mm WALL CLADDING PANELS with (lightly grooved on both sides) made out of JSW Exterior sheet, 240 Mpa 120 GSM Zinc coating Pre-Painted with 20 microns REGULER MODIFIED POLYSTER over 5 microns Primer and back coat shall be 6 to 8 Microns and JSW interior sheet. Panels will be with guard film In between, PUF Foam (BASF Germany) at a density of 40+/-2 kg/m3 as core (CFC /HCFC Free 4 Pentane Blown Zero ODP Product). 1517 Sq. Mtr

50mm THK - PUF Floor Slab Both side 0.15mm craft paper Density 40 Kg/Cum. 637 Sq. Mtr

Single leaf Hermetically Sealed Horizontal Chiller Sliding Door With Aluminium Door Profile for positive application up till +0 degree. PUF Panel Insulation, PCGI sheet thickness 0.6 mm, 80 mm door thickness, for clear opening dimension 1800 mm Width and 2700 mm Height with C-flushing, Aluminium Wall frame and Counter Wall Frame. (Metaflex Make)

Accessories T Section, All flashing, Silicon Sealants and PUF chemicals for Sealing and Screws, Rivets, 200 micron Polysheet. Accessories T Section, All flashing, Silicon Sealants and PUF chemicals for Sealing and Screws, Rivets, 200 micron Polysheet.

SUPPLY & INSTALLATION PUFF PANELS FOR PACK HOUSE, ANTE ROOM & RECEIVING AREA [1 No.]

Automatic Continuous 60 mm WALL CLADDING PANELS with (lightly grooved on both sides) made out of JSW Exterior sheet. 240 Mpa, 120 GSM Zinc coating Pre-Painted with 20 microns REGULER MODIFIED POLYSTER over 5 microns Primer and back coat shall be 6 to 8 Microns and JSW interior sheet. Panels will be with guard film In between, PUF Foam (BASF Germany) at a density of 40+/-2 kg/m3 as core (CFC/HCFC Free 4 Pentane Blown Zero ODP Product). 2410 Sq. Mtr

Double Leaf Door-1800 x 2700 Clear Opening •Galvanized Iron Powder Coated double skin door with 44 mm leaf thickness made of 0.80 mm GI sheet for door leaf with PUF of density 40 Kg/M3 infill and door frame made out of 1.20mm thick Galvanized Iron profile. •Acc :-SS 304 ball bearing Hinges, SSD 304 Handle back to back Apar make, Dead Lock with Both side key operation Apar make, Concealed type Bottom Drop seal APAR MAKE, Door closer TS 68 Std Arm Dorma Make, Door stopper floor mounted Apar make, Double glazed view panel of 300*300 mm with 5 mm thick toughened glass, Door seal, Flush Bolt for Double leaf door.

Double Leaf Door-1800 x 2100 Clear Opening •Galvanized Iron Powder Coated double skin door with 44 mm leaf thickness made of 0.80 mm GI sheet for door leaf with PUF of density 40 Kg/M3 infill and door frame made out of 1.20mm thick Galvanized Iron profile. •Acc :-SS 304 ball bearing Hinges, SSD 304 Handle back to back Apar make, Dead Lock with Both side key operation Apar make, Concealed type Bottom Drop seal APAR MAKE, Door closer TS 68 Std Arm Dorma Make, Door stopper floor mounted Apar make, Double glazed view panel of 300*300 mm with 5 mm thick toughened glass, Door seal, Flush Bolt for Double leaf door.

Emergency Single Leaf Door - 1000 x 2100 Clear Opening •Galvanized Iron Powder Coated double skin door with 44 mm leaf thickness made of 0.80 mm GI sheet for door leaf with PUF of density 40 Kg /M3 infill and door frame made out of 1.20mm thick Galvanized Iron profile. •Acc :-SS 304 ball bearing Hinges, SSD 304 handle Back to back Apar make, Dead Lock with Both side key operation Apar make, Concealed type Bottom Drop seal APAR MAKE, Door closer TS 68 Std Arm Dorma Make, Door stopper floor mounted Apar make, Double glazed view panel of 300*300 mm with 5 mm thick toughened glass, Door seal, Flush Bolt for Double leaf door, Panic Bar & PHT Lock Yale Make.

Accessories T Section, All flashing, Silicon Sealants and PUF chemicals for Sealing and Screws, Rivets, 200 micron Polysheet. Accessories T Section, All flashing, Silicon Sealants and PUF chemicals for Sealing and Screws, Rivets, 200 micron Polysheet.

Galvanized Iron Powder Coated Window made out of 1.2mm thick GI sheet and powder coated with pure polyester powder. 5mm thick toughened glass on the both sides and silica gel for moisture absorption including sealing and fixing arrangement. The glasses will be vacuum sealed and fitted in factory. Size 1000*2000 mm.

DOCK, DOCK LEVELER, OVERHEAD SECTIONAL DOOR

Dock leveller : Electro hydraulic Operation, 6 Ton Dynamic Load •Capacity or 15 Ton UDL capacity: Separate Single Hydraulic Cylinder for Platform and single cylinder for Lip movement; Swing lip system; 2000 mm width and 2500 mm length. Lip Length: 400 mm. Heavy Duty Rubber Bumper of size 380 x 230 x 100 mm (Included). •Self-Supporting Base Frame Open & Self Cleaning Hinged Design with platform and lip are made of high quality tear plate: tear plate 6/8 mm for the platform and tear plate 12/14 for the lip. • Full hydraulic Emergency safety stop. • Robust steel lip keepers for transverse movements (cross traffic). • Non-removable maintenance strut. • Non retractable sliding toe-guards on both sides.

Retractable Type Dock Shelter Highly durable curtains which is a combination of polyester fiber and PVC top coating. Width 3450 mm and height 3400 mm with top projection of 1000 mm and depth 600 mm. Side curtain of 670 mm on both sides.

Overhead Sectional Door Automatic 40 mm thickness Double wall sandwich panel of galvanized sheet PU Insulation, Panel sections of height 600mm each. View glass: Toughened glass Oval Shape port 01 no. Safety features: Spring break device, slack cable safety device, cable break safety device, bottom edge safety device. (2500 x 3000)

RINAC INDIA LIMITED (BID ID -6344328)

M/S Virtus Techno (BID ID -6345238)