Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.7 LAccepted-AOC 194 IIND FLOOR POCKET 9 SECTOR 24 ROHINI DELHI 110085 | DELHI | NORTH WEST DELHI | DELHI | 110085 | 1 | Accepted-AOC Ok | |
| 2 | 2₹26.2 L+₹1.5 L (6.11%)Rejected-Finance 205 PARSHAV VIHAR PLOT NO 50 IP EXTN PARPARGANJ DELHI 110092 | EAST | DELHI | 110092 | 2 | Rejected-Finance Not The Lowest Tenderer | |
| 3 | 3₹31.8 L+₹7.2 L (29.2%)Rejected-Finance RZ A2 2 CHANAKYA PLACE PART I OPP C 1A BLOCK JANAK PURI NEW DELHI 110059 | NEW DELHI | WEST DELHI | DELHI | 110059 | 3 | Rejected-Finance Not The Lowest Tenderer | |
| 4 | 4₹32.5 L+₹7.8 L (31.7%)Rejected-Finance A 3 257 JANAKPURI NEW DELHI 110058 | WEST DELHI | DELHI | 110058 | 4 | Rejected-Finance Not The Lowest Tenderer | |
| 5 | 5₹33.0 L+₹8.3 L (33.7%)Rejected-Finance N A | NEW DELHI | DELHI | 110001 | 5 | Rejected-Finance Not The Lowest Tenderer |
Tender Value
Refer Docs
EMD Value
₹98,000
Closing Date
17 Feb 2021, 6:00 pmClosed
GE E/M BASE HOSPITAL DELHI CANTT
GE E/M BASE HOSPITAL DELHI CANTT-10
REPAIR/ REPLACEMENT OF UNSERVICEABLE POINT WIRING, FITTING/ FIXTURES, DB AND UNSV EARTHING, BUILDING SECURITY LIGHT AND UNSV LT UG CABLE AT ZONE-A UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10
2021_MES_413415_1
GE/BH-72/2020-21
Open Tender
Electrical and Maintenance Works
Item Rate
330 days
GE E/M BASE HOSPITAL DELHI CANTT
Class D Category b(i)
7 documents required · 7 mandatory
₹500
Yes
GE E/M BASE HOSPITAL DELHI CANTT
₹98,000
Yes
20 Mar 2021
19 Jan 2021
19 Feb 2021
19 Jan 2021
17 Feb 2021
3 Feb 2021
Amount
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc shall be measured and paid separately) and making good disturbed surfaces of wall floor etc complete all as specified and as directed.
M&L point wiring for modular switches with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, drawn through and including concealed, rigid non-metallic PVC Conduit of minimum 25mm dia or as per site requirement with all fittings, including cadmium plated screws as per IS, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, suitable for One light/fan/bell point controlled by one No, 5 Amp, one way switch/bell push complete all as specified and as directed.
All as per item No. 2.00 here in before but for one three pin, 5 Amp, socket out let on independent board complete all as specified and as directed.
All as per item No. 2.00 here in before but for one three pin, 5 Amp, socket out let on same board complete all as specified and as directed.
All as per item No. 2.00 here in before but for one light point controlled by two Nos, two way switches complete all as specified and as directed.
All as per item No. 2.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete all as specified and as directed.
All as per item No. 2.00 here in before but point wiring with 4 Sqmm, multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor complete all as specified and as directed.
M&L point wiring with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, drawn through and including PVC Casing Caping with all fittings such as bend, tee, junction boxes, elbows etc, including cadmium plated screws as per IS, including sunk type CI/steel terminal boxes, 1.2 mm thick, concealed in wall, covered with and including 3mm thick plastic laminated sheet top cover, ISI marked, fixed with Brass screws, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, suitable for One light/ fan/ bell point controlled by one No, 5 Amp, one way switch/bell push complete all as specified and as directed.
All as per item No. 8.00 here in before but for one three pin, 5 Amp, socket out let on independent board complete all as specified and as directed.
All as per item No. 8.00 here in before but for one three pin, 5 Amp, socket out let on same board complete all as specified and as directed.
All as per item No. 8.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete all as specified and as directed.
All as per item No. 8.00 here in before but point wiring with 4 Sqmm, multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor complete all as specified and as directed.
S&F in replacement modular cover plate with frame, 1 or 2 module complete all as specified and as directed.
S&F in replacement modular cover plate with frame, 3 modules complete all as specified and as directed.
S&F in replacement modular cover plate with frame, 4 modules complete all as specified and as directed.
S&F in replacement modular cover plate with frame, 6 modules complete all as specified and as directed.
S&F in replacement modular cover plate with frame, 8 modules complete all as specified and as directed.
S&F in replacement modular cover plate with frame, 12 modules complete all as specified and as directed.
S&F in replacement modular cover plate with frame, 16 modules complete all as specified and as directed.
S&F in replacement modular metal flush box, 1 or 2 modules complete all as specified and as directed.
S&F in replacement modular metal flush box, 3 modules complete all as specified and as directed.
S&F in replacement modular metal flush box, 4 modules complete all as specified and as directed.
S&F in replacement modular metal flush box, 6 modules complete all as specified and as directed.
S&F in replacement modular metal flush box, 8 modules complete all as specified and as directed.
S&F in replacement module metal flush box, 12 modules complete all as specified and as directed.
S&F in replacement module metal flush box, 16 modules complete all as specified and as directed.
S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, complete all as specified and as directed.
S&F in replacement modular switch, 2 way, 6 Amp, 1 Module, complete all as specified and as directed.
S&F in replacement modular bell push, 6 Amp, 1 Module complete all as specified and as directed.
S&F in replacement modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete all as specified and as directed.
S&F in replacement modular switch, 1 way, 16 Amp, 1 Module, complete all as specified and as directed.
S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module complete all as specified and as directed.
S&F in replacement Plug Top, 5 Amps, 230 Volts, white, polycarbonate body, 3 pin type, including connecting complete all as specified and as directed.
S&F in replacement Lamp holder, white, Polycarbonate body, with back plate, suitable for batten fittings, fixed in position & connecting complete all as specified and as directed.
S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed.
S&F in replacement Bell ding dong, AC, 230 Volts, fixed in position & connecting complete all as specified and as directed.
S&F in replacement ultra slim, electronic type, ballast suitable 1 x 36 / 40 watts fluorescent tube light fitting & connecting all as specified and as directed.
S&F in replacement sub main wiring with 2 runs of 4 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 20 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 4 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).
S&F in replacement sub main wiring with 2 runs of 6 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 6 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).
S&F in replacement sub main wiring with 4 runs of 10 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 32 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 10 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Four run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).
S&F in repair load line, distribution board, double door type, TPN, vertical, 4 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. Make : Legrand Model: 5077 45 or equivalent model of Make mentioned in PS.
Supply, fixing and connecting in replacement recessed Type, Full window, opal Diffuser, Ultra modern, slim LED Panel 2x2, 36W, size 595X595mm (Nominal), suitable for Existing false ceiling, with CRCA powder coated White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 3KV, safety & performance test as per IS:15885 Part 2/Sec, Total system Lumen not less than 4200, in Cool day Light (5700K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours, complete with all accessories as required complete all as specified and as directed. Make : Havells Model No :- STRATO 2X2PLR36WLED857MOD with LED Drivar Model No LEDDRIVER36V36WS or equivalent model of Make mentioned in PS.
Supply, fixing and connecting in replacement suspended Mounted, integrated LED, 4 feet Fitting, 40 Watt, with CRCA white powder coated & opal diffuser finish, Integral electronic driver with Output short circuit protection, Surge Voltage Protection of minimum 3 KV and Safety test as per IS15885 Part 2/ Sec, Total system Lumen not less than 4100 or above in Cool day Light (5700K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/Watt, THD(%) < 10, with Average life of 50000 Burning hours, complete with chain hanging arrengment (2 to 3 Metre height), all accessories as required complete all as specified and as directed. Make : Havells Model No CONSTA1144LP40WLED857SPCWH or equivalent model of Make mentioned in PS.
Supply, fixing and connecting in replacement pole mounted, post top lantern, 35Watt, with Die-cast alluminium housing, Integral electronic driver, with Output short circuit protection and Safety test as per IS15885 Part 2/ Sec, Epoxy powder coated black outside & white inside aluminum sheet top cover of the housing, supported by 3 Nos, die-cast Aluminium arms, The inner white portion act as a reflector for indirect symmetrical light distribution, total system Lumen not less than 1650 in Cool day Light (5700K), Power factor>0.95, CRI (Ra) >80, , THD(%) < 10 with Average life of 50000 Burning hours, complete with all accessories and suitable GI pipe as required complete all as specified and as directed. Make : Havells Model No ENDURASPRING6PT35WLED757PSYMTOTG or equivalent model of Make mentioned in PS.
M&L Earthing complete with galvanised Iron earth plate eletrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5 metre below normal grond level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Building at another end GI earth wire encased in and including 15mm bore GI light grade pipe through upper end of earth plate upto main DB of bldg, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including execvation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed.
Taking down ceiling fan, exhaust fan including connection cable, dismantling blades and refixing & reconnecting the same after necessary repair/rewinding/painting etc complete all as specified and as directed. Note: Servicing/Rewinding/Painting of Fan shall be measured and seprately under respective item of this Schedule.
M & L for painting of ceiling fans/ exhaust fan complete, with syntetic enamel paint as per existing color by one coat spray painting including filling cavities with filler, including cleaning all dust complete all as specified and as directed.
M&L for servicing of ceiling fans/exhaust fan/wall fan /padestal fan of any Make and sizes, carrying out minor repair such as greasing, oiling, fitting, testing complete all as specified and as directed.
M&L rewinding ceiling fan of any make and model, 1200 /1400 mm sweep, with super enamelled copper wire of required size, duly varnishing with high quality Varnish, including greasing & servicing and testing including taking down old winding wire complete all as specified and as directed.
All as per item No. 49.00 here in before but rewinding Exhaust fan of size 200mm to 300mm complete all as specified and as directed.
All as per item No. 49.00 here in before but rewinding Exhaust fan of size 380mm complete all as specified and as directed.
All as per item No. 49.00 here in before but rewinding Exhaust fan of size 450 mm complete all as specified and as directed.
All as per item No. 49.00 here in before but rewinding wall/padestal fan of size 450 mm complete all as specified and as directed.
S&F in replacement bearing No 6200/6201/6203/6204 suitable for Ceiling fans/Exhaust fan of existing make and size, for proper running including testing complete all as all as specified and as directed. (Note: Testing shall be done in MES store yard at contractor's expense).
S&F in replacement bush suitable for Ceiling fans/Exhaust fan/padestal fan/wall fan of existing make and size, for proper running including testing complete all as all as specified and as directed. (Note: Testing shall be done in MES store yard at contractor's expense).
S&F in replacement capacitor 2.5 Mfd complete all as all as specified and as directed.
S&F in replacement capacitor 3.15 Mfd complete all as all as specified and as directed.
S&F in replacement capacitor 4.0 to 8.00 Mfd complete all as all as specified and as directed.
S&F in replacement Electronic Energy Meter, with LCD display, Class 1.0, 240 V, 50 Hz, 10-60 A , AC, Single Phase, Two Wire, conforming to IS-13779 and relevant IEC standards, including transparent hinge type meter box made from engineering plastic including 6 Sqmm, copper stranded wire, PVC insulated, 1100 Volt grade, of required length including taking down old unserviceable meter and deposited to MES Store yard for taking into charge complete all as specified and as directed.
S&F in replacement Electronic Energy Meter, with LCD display, Class 1.0, 240 V, 50 Hz, 10-60 A , AC, Three Phase, Four Wire, conforming to IS-13779 and relevant IEC standards, including transparent hinge type meter box made from engineering plastic including 6 Sqmm, copper stranded wire, PVC insulated, 1100 Volt grade, of required length including taking down old unserviceable meter and deposited to MES Store yard for taking into charge complete all as specified and as directed.
S&F in repair switch socket combination, 5/15 Amp, multipurpose, with PVC gang box complete all as specified and as directed.
S&F in repair switch socket combination, 5 Amp, multipurpose, with PVC gang box complete all as specified and as directed.
S&F in repair Fan rod, 3 feet long, made out of 20 mm bore GI pipe, with necessary clamps and other accessories complete all as specified and as directed.
S&F in repair PVC casing caping, medium grade, size 25 X 16 mm, including necessory accessories (Tee, elbow etc) & clamp, screw, rowel plug etc. complete all as specified and as directed.
S&F in repair PVC casing caping, medium grade, size 32 X 16 mm, including necessory accessories (Tee, elbow etc) & clamp, screw, rowel plug etc. complete all as specified and as directed.
S&F in repair Rigid, non-metallic, PVC conduit, medium grade, 20mm bore, including all fittings such as tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.
All as per item No 67.00 here in before but 25 mm bore complete all as specified and as directed.
All as per item No 67.00 here in before but 32 mm bore complete all as specified and as directed.
S&F in repair Room Heat Pillar, 1500 Watt capacity, (ISI marked) Made out of Mild Steel body, with Twin Quartz tube, for direct heating, Safety tip over switch cuts off the heater in case it tilts or falls, two heat settings 750/1500 Watts for maintaining desired room temperature, powder coated finish to prevent corrosion, operating on 230V AC, 50 HZ complete all as specified and as directed. Note: Old unserviceable room heat convector shall be deposited in MES store yard.)
S&F in repair Hot air blower, Heat convector, 2 KW capacity, with blower and temp control mechanism and indications, operating on 230V, AC, 50 HZ complete all as specified and as directed. Make Usha Model No 812T Black or equivalent model of V Guard/ Havells/ Bajaj. (Note: Old unserviceable hot air blower shall be deposited in MES store yard.)
S&F in repair modular blanking plate, 1 Module complete all as specified and as directed.
S&F in repair white colour, prelaminated sheet (Hylam Sheet), 8x5 inch size, 3 mm thick complete all as specified and as directed.
S&F in repair PVC Gang box, 3x3 inch, for switch socket combination 5A complete all as specified and as directed.
S & F in replacement PVC body Exhaust fan, 200 mm sweep ,1200 RPM, 5 blade, off white, 240 Volt, with louver shutter, including necessary connection with flexible PVC Copper cable, 3 core, size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and as directed.
S & F in replacement PVC body Exhaust fan, 250 mm sweep ,1200 RPM, 5 blade, off white, 240 Volt, with louver shutter, including necessary connection with flexible PVC Copper cable, 3 core, size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and as directed.
Cutting chases, pinning in, including making good in cement mortar 1:3 including painting to match with the existing surface as in edges of landings, steps, cills, sunshades, shelves, lintels, etc; and for concealed conduit wiring, etc, cutting not exc 10 cm girth complete all as specified and as directed.
Fixing only in repair Switch socket combination, polycarbonate body, 6A / 16A- 230 V, Multipurpose, including connecting complete all as specified and as directed.
Fixing only in repair modular switch, 1 way, 6 Amp, 1 Module, including connecting complete all as specified and as directed.
Fixing only in repair modular switch, 2 way, 6 Amp, 1 Module, including connecting complete all as specified and as directed.
Fixing only in repair Modular Switch, 1 way, 16 Amp, 1 Module, including connecting complete all as specified and as directed.
Fixing only in repair Bell push, polycarbonate body, 5 Amp, 230 V, including connecting complete all as specified and as directed.
Fixing only in repair Modular Socket, 6 Amps, 3 Pin socket, 2 module, including connecting complete all as specified and as directed.
Fixing only in repair Modular Socket, 16A/ 6A, 5 Pin, 2 module, including connecting complete all as specified and as directed.
Fixing only in repair, stepped type electronic fan regulator, polycarbonate body, flush type, 230 V, including connecting complete all as specified and as directed.
Fixing only in repair MCB Distribution Box, 4 Ways, including connecting complete all as specified and as directed.
Fixing only in repair MCB Distribution Box , 8 Ways, including connecting complete all as specified and as directed.
Fixing only in repair MCB Distribution Box, 12 Ways, including connecting complete all as specified and as directed.
Fixing only in repair MCCB Distribution Box, 8 Ways, VTPN, with Metal Door, including connecting complete all as specified and as directed.
Fixing only in repair MCCB Distribution Box, 12 Ways, VTPN, with Metal Door, including connecting complete all as specified and as directed.
Fixing only in repair LED Recessed Luminaire, 12 Watt ( Moonlight), including connecting complete all as specified and as directed.
Fixing only in repair LED Tube light fitting, 10 Watt, Approx 2 feet long, including connecting complete all as specified and as directed.
Fixing only in repair LED Tube light fitting, 20 Watt, Approx 4 feet long, including connecting complete all as specified and as directed.
Fixing only in repair LED Building Street light fitting, 25 Watt, including connecting complete all as specified and as directed.
Fixing only in repair LED Flood light fitting Luminaire, 50 Watt, including connecting complete all as specified and as directed.
Fixing only in repair LED Recessed light, 36 Watt, 2 feet x 2 feet, including connecting complete all as specified and as directed.
Fixing only in repair MCCB, 100 Amp/125 Amp, 4 Pole, including connecting complete all as specified and directed
Fixing only in repair MCB, 6 to 32 Amp, SP, including connecting complete all as specified and directed.
Fixing only in repair MCB 20 to 40A, DP , including connecting complete all as specified and directed
Fixing only in repair MCB, 16 to 63 Amp, TP, including connecting complete all as specified and directed
Fixing only in repair sheet metal enclosure with Plug & socket, 20 Amps, 240 volts, including connecting complete all as specified and directed.
Fixing only in repair 10 Amps/20 Amp, 2 pole, Metal Clad Plug, 3 pin, including connecting complete all as specified and directed.
Fixing only in repair 10 Amps, 2 pole, Metal Clad socket, 3 pin, including connecting complete all as specified and directed. NOTE for Item Nos 77.00 to 102.00 :- Material against BOQ Item Nos 77.00 to 102.00 here-in-before shall be issued under Schedule 'B' " Free for fixing" and the contractor has to quote the rates for labour only.
Saini Enterprises
RUCHIKA ENGG.WORKS
M/s Adhikari construction co.
M/S Rohit Enterprises
Vishal Traders
Surjit and Sons
SANJEEV ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .