SPECIAL REPAIR TO BLDG NO P-166 SINGLE JCOS ACCN OF 5682 ASC BN (MT) AT MIL STN KALKA UNDER GE JUTOGH

Amount

Taking down of cement plaster on walls and ceiling of any description incl raking out of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 10mm thick in cement mortar (1:6) on brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:4 on brick concrete surface of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM 1:4 as in soffit of slabs/ Chajja/ Sunshade outer side of building finishing the plastered surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for dubbing out average 10mm thick on irregular face of walls in CM 1:4 on slabs/ Chajja/ Sun shade complete all as specified and directed.

M&L for complete removal of existing trearment from wall by washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bound distemper over a coat of 1-2 mm thick wall care putty on walls incl preparation of surface complete all as specified and directed.

M&L for prepration of newely plastered wall surfaces and applying two coats of oil bound distemper over a coat of 1-2mm thick wall care putty on walls complete all as specified and directed.

M & L for preperation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered wall surfaces by brooming down with wire brush and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic colored tiles of size 350X250X7mm/ 450X300X7mm thick, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles fixed over and incl 10 mm thick plastering in CM 1:4 complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match laid over and including 15mm thick screed bed with CM 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with CM 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 in skirting/dado and riser to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick backing coat with CM 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

S & F pressed steel frames for door with one or more rebates incl necessary fixing lugs hinges lock strike plate etc of size 125 x 60mm complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in filling back of pressed steel chowkhats complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

S & F factory made 2nd class hardwood 35mm thick factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venerred particle board with commercial veneering on both faces. The size of rail and style as per IS- 1003 (part -I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made 35 mm thick IInd class hardwood Glazed & skeleton shutters ,open rebated & prepare to receive gauze. Divided into squares ,with plain ,chamfered and rounded,mitred and rebated sash bars ,any numbers size of members of shutter as specidied in SSR Part-I section 8 (clause 8.24 (a) : supplied and fitted to chowkats complete all as specified and directed.

S & F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed.

S& F 4mm thick sheet glass plain ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia or wire and average width or apeture 1.40mm and fixed with stainless steel wire staple in complete all as specified and directed.

S&F 100 mm long cold rolled mild steel medium weight but hinges complete all as specified and directed.

S&F 125 mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed.

S&F 200mm long aluminium anodised,barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extrunded sections and fixing bolt and sliding bolt of extrunded sections or cast aluminium alloy complete all as specified and directed.

S&F floor door stopper Aluminium body and tongue,anodised overall length of cover plate of size 150 mm long with hard drawn steel spring complete all as specified and directed.

S&F 150mm, ms ordinary rat tail rod patttern door springs including roller and roller plate complete all as specified and directed.

S&F mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Gde E-165 complete all as specified and directed.

M & L for preparation of new or previosuly untreated wooden surfaces of any description not otherwise described over 10cm width or grith and applying two coats of Synthetic enamel paint to wooden surface over and incl one coat of pink primer complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamelled paint over and incl one coat of red oxide primer complete all as specified and directed.

S&F in repair 25 mm thick drapery rod ,mild steel,powder coated with fixing brackets, end knobs, stop, etc. complete all as specified and directed.

Dismentling of existing roof trearment mud in roofs, any thickness, including plastering and leeping (whether full thickness removed oronly a part there of) complete all as specified and directed.

M & L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in roof kerb or mud stopes, padding on roof etc finished even and fair, average thickness 40mm to maintain proper slope complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surface of roof finished even and smooth without using extra cement mixed with and incl water proofing compound of approved make as per manufacturers instructions on existing surfaces complete all as specified and directed.

M&L for cleaning of old roof slab surfaces including sweeping clean &washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under : (a) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.30 Ltr/sqm (b) M&L applying bitumen @1.20kg/sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required all complete all as specified and directed (d) Applying one coat of bitumen 85/25 @1.2 kg/sqm complete all as directed. (e) Applying aluminium paint @ 0.20 kg/sqm complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

Taking up or down steel water tubing and connections incl cleaning for refixing or removal from site of 15mm bore complete all as specified and directed.

S & F galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor of size 15mm bore complete all as specified and directed.

Re-fixing old steel tubing 15 mm dia and connections in new or old positions, incl new fittings complete all as specified and directed.

Taking up or down steel water tubing and connections incl cleaning for refixing or removal from site of 20mm bore pipe complete all as specified and directed.

S & F galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor of size 20mm bore complete all as specified and directed.

Re-fixing old steel tubing 20 mm dia and connections in new or old positions, incl new fittings complete all as specified and directed.

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including, 600 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed.

S & F in repair viteous china squating pan " orissa pattern" of size 580mm x 440mm white with integral foot rest or back inlet incl PCC 1:2:4 type B-1 for making good the floor complete all as specified and directed.

S & F in repair PVC valve less syphonic action type flushing cisten of 10 litres capacity white wash inlet hall valve float side handle incl brackets of angle iron of size 25 x 25 x 4mm incl PVC flush pipe of 32mm dia 90cm long for low level fixed to squat pattern closet incl all joints and making good the floor and PVC connection 15cm long complete all joints and making good to floor complete all as specified and directed.

S&F in repair 15mm bore dia chromium plated Pillar tap, fancy type cast copper alloy with capstain head, screwed down high pressure with long screwed shank and fly nut complete all as specified and directed.

S & F 15mm bore PVC water connection 450mm long with brass nuts and fitted to 15mm bore of pipe complete all as specified and directed.

S & F in repair stop valve of 15mm bore cast copper alloy screwed down high pressure with crtuch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified.

S & F in repair bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down secrewed for iron pipe or for brass ferrule of size 15mm bore complete all as specified and directed.

S&F Tubler towel rail, 20mm dia D type 60 CM long between flanges complete all as specified and directed.

S & F in repairs PVC (SWR) pipes 110 mm bore single socketed, in any length, with rubber ring joints, laid in trenches or under floors, inserted in retaining wall etc complete all as specified & directed.

S & F in repairs PVC (SWR) pipes 75 mm bore single socketed, in any length, with rubber ring joints, laid in trenches or under floors, inserted in retaining wall etc complete all as specified and directed.

S & F in repairs PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S & F in repairs PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends with access door complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) bends with access door complete all as specified and directed.

S&F in repair 110 mm bore, PVC (SWR), Junction, (Single T/Y), equal or unequal with access door complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR), Junction (Single T/Y), equal or unequal with access door complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR), floor trap, plain with grating including jointing with solvent, cement, complete all as specified and directed.

S&F in repair Salt-glazed stone ware gully traps,125/110 mm, square or round mouthed, type `P' PVC (SWR) gully trap setting and jointing with cement complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n.exc 1000 ltrs and removing frome site complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 1000 litres capacity, ISI marked, triple layered, marked embosed, hoisted and fixed in position including connecting up pipes compete all as specified and directed.

S&F in repair Ball valves 15 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified and directed.

S&F in repair 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair brass chromium plated shower rose 100mm size with or without swivel joint incl fixing to steel pipe of size 15mm bore complete all as specified and directed.

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash all as required complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with concealed Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification , complete all as specified and directed.

One light /fan/bell point controlled by one, switch complete all as specified and directed.

One 5 pin 5/6 Amp socket on the same board complete all as specified and directed.

One 5 pin 5/6 Amp socket on independent board complete all as specified and directed.

One 3 pin 15 Amp socket independent but with 2.5 sq mm PVC insulated (FRLS) unsheathed copper stranded conductor and earth wire with 2.5 Sqmm

One bell point controlled by one push button switch complete all as specified and directed.

S & F switch piano type 240 V, 6 Amp , Sp one way flush type complete all as specified and directed.

S&F socket 5 pin, 6 Amp, flush type piano (multi purpose) complete all as specified and directed.

S&F Socket 15 Amps flush type 230 Volts , AC complete all as specified and directed.

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed.

S & F bell push 240 V, 5 Amp , Sp one way flush type complete all as specified and directed.

M&L Fan regulator Electronic type 240 Volt single phase suitable for ceiling fan step type complete all as specified and directed.

S&F ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S&F for lamp holder pvc body with back plate complete including with 9/10 Watt LED lamp complete all as specified and directed.

S&F in replacement of sheet metal enclosure for MCB DB TPN double door, 4 way complete with 200 Amps rated Bus bar complete all as specified and directed.

S&F sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed.

S&F MCB TPN 63 Amps 415V incl all termnials, fitting etc. complete all as specified and directed.

S&F MCB SPN 32 to 40 Amps 250V incl all termnials, fitting etc. complete all as specified and directed.

S&F MCB SP 6-32 Amp ,240 Volt incl all termnials, fitting etc. complete all as specified and directed.

M&L for replacement of call bell electric (ding dong type) , 240 Volt , single pole complete all as specified and directed.

M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run complete all as specified

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.

S&F in repair LED mirror light 10 watt with diffuser, decorative type with driver duly electrical connection from ceiling rose to fittings complete all as specified and directed. Make : Havells cat part No ENDURALINEARNEOBS10WLED865SPCWH/ Polycab Cat Part No. LDO0103021/ Crompton Cat Part No. LCL-10-CDL

S&F in replacement energy efficient T-8 LED batten integrated type single tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten with extruded aluminium/PC Body and PC diffuser including all accessories pre wire and connecting up with copper three core flexible wire complete all as specified and directed. Make: Cormpton Greaves Cat Part No DMLN1LT8-16 and LTT8-20 or equivalent of C&S/Philips/Wipro/Havells.

S&F in replacement Energy saving LED Street Light Luminaries 45 watt fitting with driver having secondary optics with uniform distribution of light. Pressure die cast aluminum housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage range 120 to 270 V, including GI brackets with nuts and bots of suitable size ,making connection from ceiling rose to LED light fitting with suitable cable size for connection complete all as specified and directed. Make :-CROMPTON Cat no - LSTP-45-CDL/ Bajaj Cat No BRTFG 45W LED I/ Polycab Cat No PCGLS T1 45.

Supply, laying and testing of cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core , complete all as specifed and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40 mm dia confirming to IS , approved colour complete with fittings for cable protection complete all as specifed and directed.

AAR PEE ENTERPRISES

S.R.SHARMA & SONS

R. P. Suppliers and Construction Co.