Provn of Certain Technical Infrastructure at Tibri (Gurdaspur) Mil Stn (Phase-I)

Amount

Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule 'A' Part-I (A) brought forward from serial page No. 46.

(Sch 'A' Part-I (Sec-B) (PRE ENGINEERED BUILDING WORK) Design, Supply and erect pre-engineered building steel structure of HANGER MAIN FLIGHT with annexe (Double Storey) complete all as specified and as shown on drawings.

(Sch 'A' Part-I (Sec-C) (PRE ENGINEERED BUILDING WORK) Design, Supply and erect pre-engineered building steel structure of HANGER FOR WSI FLIGHT with annexe (Double Storey) complete all as specified and as shown on drawings.

LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS

Lump sum price worked out by the contractor for SITE CLEARANCE & EARTH WORKS as listed in Schedule 'A' Part-II brought forward from serial page No. 49.

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-III brought forward from serial page No. 61.

Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-IV brought forward from serial page No. 62.

Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' Part-V brought forward from serial page No. 64.

Lump sum price worked out by the contractor for ROAD WORKS as listed in Schedule 'A' Part-VI brought forward from serial page No. 66.

Lump sum price worked out by the contractor for AREA DRAINAGE WORKS listed in Schedule 'A' Part-VII brought forward from serial page No. 68.

Lump sum price worked out by the contractor for SECURITY WALL, FENCING AND GATE WORKS as listed in Schedule 'A' Part-VIII brought forward from serial page No. 72.

Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS listed in Schedule 'A' Part-IX brought forward from serial page No. 79.

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-X brought forward from serial page No. 81.

Lump sum price worked out by the contractor for FIRE FIGHTING AND FIRE ALARM WORKS as listed in Schedule 'A' Part-XI brought forward from serial page No. 86.

Lump sum price worked out by the contractor for LIGHTENING PROTECTION WORKS as listed in Schedule 'A' Part-XII brought forward from serial page No. 87.

Lump sum price worked out by the contractor for STREET LIGHT WORKS as listed in Schedule 'A' Part-XIII brought forward from serial page No. 90.

Lump sum price worked out by the contractor for SUMMER APPLIANCES WORKS as listed in Schedule 'A' Part-XIV brought forward from serial page No. 91.

Lump sum price worked out by the contractor for DG SET WORKS as listed in Schedule 'A' Part-XV brought forward from serial page No. 93.

Lump sum price worked out by the contractor for EOT CRANES WORKS as listed in Schedule 'A' Part-XVI brought forward from serial page No. 94.

Lump sum price worked out by the contractor for LIFT WORKS as listed in Schedule 'A' Part-XVII brought forward from serial page No. 95.

Lump sum price worked out by the contractor for RUNWAY AND TAXI TRACK WORKS as listed in Schedule 'A' Part-XVIII brought forward from serial page No. 96(R).

MISCELLANEOUS ITEMS OF WORKS -SCH'A' PART-XIX (INTERNAL ELECTRIFICATION WORKS)

Supply and fixing modular metal box flush type 8 module complete all as specified and directed by Engr - in - Charge

Supply and Fixing modular metal box flush type 12 module complete all as specified and directed by Engr - in - Charge

Supply and Fixing modular white cover plate with frame 12 module complete all as specified and directed by Engr - in - Charge

Supply and Fixing Modular RJ 11 telephone socket complete all as specified and directed by Engr -in- Charge

Supply and Fixing Modular TV Socket complete all as specified and directed by Engr -in- Charge

Supply and Fixing modular ceiling rose surface type with 3 terminals complete all as specified and as directed by Engr -in- Charge.

Supply and Fixing modular lamp holder PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Supply and Fixing Decorative 9W LED wall mounting fittings complete set including 9 W LED lamp all as specified and as directed.

Supply and fixing LED high bay light fitting 90 Watts with including led lamp, input 110 volts to 280 Volts, with provn of auto shut down on high voltages, life>50000 Hrs, operating temp 1 degree to 50 degree, as per IP 65 luminaries comprising of rectangular shape pressue Die cast aluminium housing with weather proof gasket for lamp and driver compartment with system wattage of 90 W = 10% W and rated lumens of min 5000 lumens with 120 degree view angle, the dirver must be constant current type having THD < 10% and power factor >0.95 with short circuit protection, oper circuit protection, reverse circuit protection, high voltage protection, protection against 10 KV high surges, the luminaire must have secondary optics with perfectly matched lenses for better light control and comply to IS 10322. Note : Luminaire driver shall be same make and THD shall be minimum 20%.

Supply and fixing energy saving environmental friendly, long life , exclusive innovative die-cast aluminium IP 66 flood light with high power LEDs as light source , suitable for highlighting retails space 210 watt LED replacement metal halide flood light hoarding light luminaire with led lamp all accessories ,connecting up with twin core twisted flexible copper conductor cable complete all as specified & directed by Engr-in-Charge .

Supply & fixing GI pipe bracket made out of GI pipe light grade 32 mm dia and bend to shape 1.5 mtr long MS clamps made out of MS flat iron of size 32 mm thick with nuts & bolts, washers complete and drilling of holes for nuts & bolts etc all as specified and directed

Supply & fixing Wall mounting fan AC 230 Volt 50 Hz single phase 450 mm sweep with built on off & speed regulator inside mounting base oscillating type with aluminium alloy one piece blade double ball bearing heavy duty motor sturdy close mesh guard stainless steel stem having vertical angle adjustment from 22 degree to 45 degree including grouting of MS Rugged studs/bolts in wall/column for mounting the fan complete all as specified and directed.

Supply and fixing DLP UPVC trunking system size 80 x 50 mm zip lock flexible cover mounted on wall / roof / floor including all finishing accessoriess , cable grip designed to simplify for mounting Mosaic frame, modular Switch , sockets with support etc complete in all as specified and directed.

Supply and Fix distribution board made out of CRCA sheet 2 mm thick DB vertical type double door TPN 4 Way MS sheet including fixing in the wall,cutting chases grounting and necessary patch work and white wash to match with the existing including making connections all as directed containing the folowings. Note :- All the connection of incoming and out goiing wire in MCCB and MCB will be made with thimble with suitable size as directed. (a) MCCB 4 Pole 125 Amps 25 KA breaking capacity with thermal release 01 No (In coming) (b) Bus bar 200 Amp rated mode out of Aluminium on insulated duly insulated wire adhesive tape RYB & black-4 Nos (c) MCB SPN 40 amp-04 Nos,MCB SP 40 Amp-04 Nos (Out going) (d) Connection from MCCB to bus bar will be made with Aluminium Strip and thimble of suitable size all as directed.

Supply and Fix distribution board made out of CRCA sheet 2mm thick DB vertical type double door TPN 8 Way MS sheet including fixing in the wall,cutting chases grounting and necessary patch work and white wash to match with the existing including making connections all as directed containing the folowings. Note :- All the connection of incoming and out goiing wire in MCCB and MCB will be made with thimble with suitable size as directed. (a) MCCB 4 Pole 160 Amps 25 KA breaking capacity with thermal release 01 No (In coming) (b) Bus bar 200 Amp rated mode out of Aluminium on insulated duly insulated wire adhesive tape RYB & black-4 Nos (c) MCB SPN 40 amp-04 Nos,MCB SP 40 Amp-08 Nos (Out going) (d) Connection from MCCB to bus bar will be made with Aluminium Strip and thimble of suitable size all as directed.

Supply and Fixing energy efficient LED bulb, B22 9 Watt complete all as specified and as directed.

Material and labour Bell ding dong modular type complete all as specified and as directed.

Supply and fixing Plug Socket power unit including with protection of MCB 20 to 32 Amp all as specified and directed by Engr-in-Charge

INTERNAL WATER SUPPLY WORKS

Material & labour for shower rose swivel type with 195mm long shower arm bend at 45 degree, chromium plated, fancy type sitable for fixing with 15mm bore pipe complete all as specified.

SEWAGE DISPOSAL WORKS

M&L on site LLDPE Septic tank designed for 10 user to carry sewage and sulage water excavation in any type of soil PCC (1:4:8) below foundation,vent shaft,connection etc,complete for (convetionl) complete al as per shown on drgs.

Material & labour RCC Septic tank designed for 50 Users conventional to carry sewage and sullage water, excavation in any tupe of soil PCC(1:4:8) below foundation RCC M-30 Design Mix in walls,Base slab,Baffle walls and Roof slab including beams etcwith vent shaft,manhole opening, with coverconnection etc complete with effective depth of 1.5 meter and overall depth of 3 meter for complete all as specified and directed.

Construction of Soakage well in soft/loose soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M25 concrete incl intercepting chamber and screen chamber made of brick mansory in cement mortar, RCC cover slab in M25/SFRC cover, interconecting pipes of RCC/DWC complete filled with brick bats of size 1.20m dia x 3.00m effective depth complete all as specified and as shown on drawings

All as per srl item No. 5.03 above but of size 1.8m dia x 3m effective depth complete all as specified and as shown on drgs.

ROAD WORKS

Material & labour for 150mm thick (compacted thickness, in two layer of 75mm) wet Mix Macadam (WMM) manufactured in WMM plant. Each layer compacted separately (specifications as per TI 09/2018), with crushed stone aggregates of specified grading, spreading using sensor paver and consolidated to reqd gradient and camber complete all as specified and directed by GE. Note:- Before execution of this item, water absorption value of coarse aggregate shall be checked. If the water absorption value of coarse aggregates is greater than 2%, the soundness test shall be carried out on the material delivered at site complete all as specified and directed.

Material & labour preparing water mix macadam applying evenly a priming/ tack coat with bituminous primer using SS-1 @ 7.5 Kg per 10 Sqm as first coat and applying RS-1 @ 2.5 Kg per 10 Sqm as second coat (VG-30) and providing bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% binder (VG-30) content by weight of total mix rolled and compacted to required camber and gradient with 8 to 10 tonne power roller complete all as specified and directed.

Material & labour for making lines dashes,arrows,letters etc on road pavement and the like of any width with using thermoplastic compound white paint hot applied 2mm thick including glass with thermostat machine confirming to BS3262 and according to the specification laid down in IRC & most (Ministry of Surface Transport)specification 20011(4th revision) complete all as specified and directed.

Supply & fixing for road solar stud size125x125x25mm made from aluminium alloy and PC construction,solar powered by monocrystal solar panel alongwith high capacity rechargable battery (led-10mm,3 piecs each side and total 6 piece are used for high brightness) water proof confirming to IS-67-1977 having load capacity of 40 tonnes complete all as specified and directed.

Supply & fixing ABS plastic dynamically designed having high impact strength and fitted with two number reflectors on both sides size 110x128x29.5mm minimum complete all as specified and directed.

Supply and fixing Road delineator ABS round body, reflective reflectors(Amber/Red colour) and mounted on MS pipe 50mm dia duly powder Coated overall length 850mm fitted with anti rust and theft steel net including welding of mild steel flat iron at bottom of delineator of size 25x5mm,150mm long, including necessary excavation and embeded in PCC block 1:2:4 type B1 of size 30x15x30cm complete all as specified and directed.

AREA DRAINAGE WORKS

Material and labour RCC NP4 600mm dia pipes including necessary excavation/ earth work in soft & loose soil, cement concrete bedding in PCC 1:3:6 type C-2 haunching etc complete all as specified and directed. (Bldg work-100 RM, Runway 300 RM)

SECURITY WALL, FENCING AND GATE WORKS

Supply and fixing HDPE Pipe, 75mm dia bore, for weep holes complete all as directed by Engineer-in-Charge.

Supply only 3.15mm dia PVC coated galvanized steel wire chain link fencing 75mm x 75mm mesh fixed with string bolts complete all as specified. (fixing element will be measured and paid under item No. 7 of Sch 'A' Part-VIII)

EXTERNAL ELECTRIFICATION WORKS

Supply ,installing, testing and commissioning ,factory made and tested CPRI approved LT panel board Out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size,the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 50x50x6mm angle iron frame, angle iron support of 50x50x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej(freedom)lock with 2 keys)and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc.,independent chambers to accommodate complete all as specified and directed including the following accessories:- Incomer : (a) 1 No. 160A 3 pole, 25 KA, 415 V, with adjustable thermal and fixed magnetic release (b) Bus bars : 300A TPN + E busbars running throughout the length of panel Outgoing feeders : i) 1 No 100 Amp 4P 16 KA MCCB with adjustable thermal and fixed magnetic release ii) 2 No.63 Amp 4P 16 KA MCCB with adjustable thermal and fixed magnetic release

Supply ,installing, testing and commissioning ,factory made and tested CPRI approved Feeder Pillar panel board Out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size,the panel shall be dust and vermin proof,IP-65 class protection and made of 3.15 mm CRCA mild steel with 50x50x6mm angle iron frame, angle iron support of 50x50x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej(freedom)lock with 2 keys)and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc.,independent chambers to accommodate complete all as specified and directed including the following accessories:- Incomer : (a) 1 No. MCCB 200 A 3 pole, 25 KA, 415V with adjustable thermal and fixed magnetic release (b) Bus bars : 300 A TPN + E busbars running throughout the length of panel Outgoing feeders : i) 1 Nos.160 Amp 4P 16 KA MCCB with adjustable thermal and fixed magnetic release ii) 1 Nos.63 Amp 4P 16 KA MCCB with fwith adjustable thermal and fixed magnetic release

Supply ,installing, testing and commissioning ,factory made and tested CPRI approved Feeder Pillar panel board Out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size,the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 50x50x6mm angle iron frame, angle iron support of 50x50x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej(freedom)lock with 2 keys)and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc.,independent chambers to accommodate complete all as specified and directed including the following accessories:- Incomer : (a) 01 No 160 A MCCB, 3 pole, 25 KA, 415V with adjustable and fixed magnetci release. (b) Bus bars : 250A TPN + E busbars running throughout the length of panel Outgoing feeders : i) 1 Nos.160 Amp 4P 16 KA MCCB with adjustable thermal and fixed magnetic release ii) 1 Nos.63 Amp 4P 16 KA MCCB with adjustable thermal and fixed magnetic release iii) 1 Nos.32 Amp 4P 16 KA MCCB with adjustable thermal and fixed magnetic release

Supply ,installing, testing and commissioning ,factory made and tested CPRI approved LT panel board Out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts, 3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size,the panel shall be dust and vermin proof, IP-65 class protection and made of 3.15 mm CRCA mild steel with 50x50x6mm angle iron frame, angle iron support of 50x50x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej(freedom)lock with 2 keys)and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc.,independent chambers to accommodate complete all as specified and directed including the following accessories:- Incomer : (a) 01 No ACB, 1250 Amp, 4 pole, 50KA, 415 Volts manual draw out type. (b) Bus bars : 1600 A TPN + E busbars running throughout the length of panel Outgoing feeders : (i) 02 Nos. 315 Amp MCCB, 4 pole, 50 KA, 415 V, adjustable and fixed magnetic release (ii) 01 Nos.250 Amp 4P 25 KA MCCB with fixed N and S/C & adj. O/L releases

Supply ,installing, testing and commissioning ,factory made and tested CPRI approved Feeder Pillar panel board Out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size,the panel shall be dust and vermin proof,IP-65 class protection and made of 3.15 mm CRCA mild steel with 50x50x6mm angle iron frame, angle iron support of 50x50x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej(freedom)lock with 2 keys)and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc.,independent chambers to accommodate complete all as specified and directed including the following accessories:- Incomer : (a) 1 No. 100 A 3 pole, 25 KA, 415 V, with adjustable thermal and fixed magnetic release (b) Bus bars : 200A TPN + E busbars running throughout the length of panel Outgoing feeders : i) 1 Nos.63 Amp 4P 16 KA MCCB with adjustable thermal and fixed magnetic release ii) 2 Nos.32 Amp 4P 16 KA MCCB with adjustable thermal and fixed magnetic release

Supply ,installing, testing and commissioning ,factory made and tested CPRI approved Feeder Pillar panel board Out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size,the panel shall be dust and vermin proof,IP-65 class protection and made of 3.15 mm CRCA mild steel with 50x50x6mm angle iron frame, angle iron support of 50x50x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej(freedom)lock with 2 keys)and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc.,independent chambers to accommodate complete all as specified and directed including the following accessories:- Incomer : (a) 1 No. 100 A 3 pole, 25 KA, 415 V, with adjustable thermal and fixed magnetic release (b) Bus bars : 200A TPN + E busbars running throughout the length of panel Outgoing feeders : i) 2 Nos.63 Amp 4P 16 KA MCCB with adjustable thermal and fixed magnetic release ii) 2 Nos.32 Amp 4P 16 KA MCCB with adjustable thermal and fixed magnetic release

EXTERNAL WATER SUPPLY WORKS

'Material and labour Boring with drill / reverse rotary rig circulation method including electric logging through any kind of strata of soil / rocks for drilling not less than 650 mm dia hole for depth not exceeding 75 metre deep below ground level by keeping sufficient space for packing pea gravel including disposal of surplus soil / liquid mud / sand etc within 100 metre complete all as specified & directed.

All as per Srl Item No. 10.01 above but depth exceeding 75 metre and not exceeding 150 metre below ground level complete all as specified and directed.

All as per Srl Item No. 10.01 above but depth exceeding 150 metre below ground level.

Supply, assembling, lowering and fixing into bore hole 350 mm bore MS housing/casing pipe heavy duty with wall thickness 8 mm, screwed and socketed, ISI marked (IS:4270) ERW in random length up to 6 metres, including necessary fittings (such as special steel socket,coupling etc) duly painted with 2 coats of bituminous paint on external surfaces of pipe complete all as specified and directed.

All as per Srl Item No. 10.04 above but 250mm bore blind casing pipes.

Supply, assembling, jointing & lowering into bore hole 250mm bore slotted strainer vertical mild steel pipe ERW not less than 8mm thick screwed and socketed each lenght not exceeding 6 mtr (measured net as fixed) including screwed & socketed complete all as specified and directed.

Supply and fix 8 mm thick bail plug of mild steel, for 250mm (10'') bore, 60cm long with strong iron hook,screwed and welded in casing pipe complete all as specified and directed Note : Length of pipe required to be fixed with bail plug shall be measured and paid for seperately

Supplying, fixing and lowering in to bore hole casing / strainer pipe, centering guides made out of MS flat iron of size 50x6mm, made to shape with two rings at 75 cm apart and three No ribs duly welded, suitable for 250/350mm bore MS casing pipe complete all as specified & directed.

Supply and fix MS reducer of size 350mm x 250 mm, wall thickness 8mm and length not less than 600mm, screwed at both ends including necessary fittings,fixing support and jointing at appropriate length complete all as specified, directed & shown in drg

Supplying and fixing MS housing clamp made out of mild steel flat iron 150mm wide, 12mm thick, 70 cm long, suitable for 350mm dia casing pipe with necessary 19mm dia MS bolts full threaded, nuts and washers complete all as specified and directed.

Supplying and fixing cross made of mild steel flat iron 100mm wide, 10mm thick, size 350mm x 350mm and lowering upto reducer level of bore assembly complete all as specified and directed.

Supplying and fixing MS locking cap 8mm thick, 350 mm dia having internal threads with welded iron handle 20 mm dia MS round bar, made to shape complete all as specified and directed.

Material and labour for packing pea gravel of size 1.6 mm to 4.00mm, all around the casing, blind and stainer pipe pipe in the bore well to entire depth complete all as specified.

Material and labour for development of bore well with high capacity air compresser of suiatble sizefor running duration not less than 72 hours till the water becomes sand and silt free including removal of liquid mud, sand, silt etc up to a disatnce of 50 metreand deposited where directed, complete all as specified & directed.

Material and labour for yield testing and stabilizing of bore well by means of over pumping and measuring the yeild by submersible pumping set of suitable capacity and suitable head not less than 24 hours (excluding time period of development of bore well) complete all as specified & directed.

Material and labour for strata sample box of suitable size, made out of second class hard wood with openable shutter of transparent glass, having not less than 20 compartments capable of holding 400 to 500 gms of strata sample in transparent plastic containers duly marked with strata depth, including painting with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Collection of water sample from bore well and testing in Govt laboratory for water analysis for physical, chemical, heavy metal tests to check potability/purification complete all as specified and directed.

Supplying and fixing CI Air Release valve with 02 air outlets conforming to IS 14845 , size 150 mm dia bore for fixing with DI / CI water mains of 150 mm dia bore including all jointing material such as nuts, bolts, washers, rubber gasket etc complete all as specfied and directed.

Supplying and fixing Cl Non return valve / Reflux Valve PN-1.6 grade, 150mm bore including all jointing material such as nuts, bolts, washers, rubber gasket etc complete all as specfied and directed.

Supplying and fixing Cl Sluice Valve, ISI Marked, 150mm bore, flanged class PN-1.6 having spindle made out of gun metal, operating wheel, nuts, bolts, packing complete all as specfied and directed.

Supply, lowering and fixing MS heavy duty flanged pipe 5.4mm thick, 150 mm dia bore (length of each pipe not less than 3 mtr each), MS flange not less than 15mm thick on both sides with drilled holes and welded to MS pipe including jointing with necessary MS bolts, nuts, washers and packing material etc complete all as specified and directed.

Supply, laying, jointing and testing in trenches 100mm bore ductile iron pipes with spigot and socketed ends class ‘K-9’ in any length all as per IS 8329/2000 including rubber gasket joints including testing all as specified and as directed. Note :- (i) Excavation, Earth work and DI fittings shall be measured and paid for separately under respective items. (ii) Cost of Rubber tyton joints is included in rate quoted (iii) Standard length of pipe shall be 5.50 metre or 6.0 metre as available (iv) The measurement of pipes shall be net as fixed between the fittings including short lengths without any allowance for cutting and wastage and for the portion entering in the sockets of pipes and fittings. (v) Pre despatch factory inspection of DI pipe shall be carried out by representive of Accepting Officer. The cost of same shall be deemed to be included in rate quoted.

Supply and fixing of CI/DI fittings for required for laying of DI pipe of Bend (any type, redious and angle) tapers any type, (straight, bend, incresasing, decreasing or double socket etc.) Tee pieces single branch Y junction, double branch cross (all sockets or socket and spigot collars, caps and plugs) all as specified and directed by Engineer in charge

Material and labour for construction of brick masonry valve pit of size 900 x 900 x 900mm (internal size) with mild steel sheet cover 6mm thick and frame of angle iron of size 40x40x 6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including excavation and earth work,150mm thick PCC (1:4:8) type D-2 as in foundation,brick work in cement mortar (1:6), locking arrangement, and all inner size of pit shall be plastered 15mm thick in cement mortar (1:4) and coping in PCC (1:2:4) type B-1 over brick wall complete all as shown in Drg No CEJZ/TD-1060/08 Sh 1/3 to 3/3.

Material and labour for construction of brick masonry valve pit of size 600 x 600 x 600mm (internal size) with mild steel sheet cover 6mm thick and frame of angle iron of size 40x40x 6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including excavation and earth work,150mm thick PCC (1:4:8) type D-2 as in foundation,brick work in cement mortar (1:6), locking arrangement, and all inner size of pit shall be plastered 15mm thick in cement mortar (1:4) and coping in PCC (1:2:4) type B-1 over brick wall complete all as shown in Drg No CEJZ/TD-1060/08 Sh 1/3 to 3/3.

Supply, laying, jointing and testing in trenches 100mm bore ductile iron pipes with spigot and socketed ends class ‘K-7’ in any length all as per IS 8329/2000 with all necessary DI fitting including rubber gasket joints including testing all as specified and as directed. Note :- (i) Excavation, Earth work and DI fittings shall be measured and paid for separately under respective items. (ii) Cost of Rubber tyton joints is included in rate quoted (iii) Standard length of pipe shall be 5.50 metre or 6.0 metre as available (iv) The measurement of pipes shall be net as fixed between the fittings including short lengths without any allowance for cutting and wastage and for the portion entering in the sockets of pipes and fittings. (v) Pre despatch factory inspection of DI pipe shall be carried out by referesenive of Accepting Officer. The cost of same shall be deemed to be included in rate quoted.

“Supply, install, connecting, testing and commissioning of dozing/ chlorination equipment with high pressure single head adjustable by GE of the following specifications :- Adjustable high pressure 5 Kg/Sqcm, power input single phase 230V, 50 Hz, 40 RPM 1/30 fractional Horse power, Max out put 10 Ltr/ hr with mandatory accessories like lead tubing, connecting ferrules, check valves etc. Accessories must include following :- Preparation tank of net capacity 100 ltrs. FRP dosing tank dia 650 x net height 375 + conical 300. Gross height with stand 1000mm consisting of water inlet line, outlet with strainer. Drain overflow conical bottom for sludge deposition pot hole with cover, level gauge. Agitator 120 watt 900 RPM single phase flanged mounted motor with plastic shaft and impeller. Service tank dia 480 x height 575 net capacity 100 ltrs consisting of water inlet, dosing pump inlet arrangement, drain overflow level gauge inspection port. Agitator 120 watt 900 RPM single phase flange mounted motor with plastic shaft and impeller. Provision of mounting on lid/ wall complete all as specified by Engineer-in-Charge. Note :- Rate incl of necessary sub main wiring from main DB/ Panel incl provision of switch/ socket 5/15 Amp rated, connected pipe line, NRV, Valves and other connected accessories complete for connecting dosing system to CI/DI/MS pumping line including drilling and clamping etc complete for making dosing system fully functional as per site requirement. The chemical required will be measured separately. .

Supplying, lowering, installing, commissioning and testing of multistage submersible pumping set of discharge capacity not less than 550 LPM at 80 metre head with outlet size of 100mm dia bore including electric motor AC 3 Phase, 400-440 volt, 50 C/S submersible suitable capacity with the following accessories:- (a) Submersible cable PVC of copper conductor of size 16 Sqmm 3 core of required length from panell to star delta starter and 40 metre below ground level all as specified and directed

Supplying only of multistage submersible pumping set of discharge capacity not less than 550 LPM at 80 metre head with outlet size of 100mm dia bore including electric motor AC 3 Phase, 400-440 volt, 50 C/S submersible type suitable capacity.

FIRE FIGHTING AND FIRE ALARM WORKS

Supply & fixing 2 core x 1.5 sqmm stranded copper conductor armoured cable XLPE insulated with GI steel wire round/strip armoured PVC outer sheated complete all as specified and directed by Engineer in Charge

Supply & fixing 4 core x 1.5 sqmm stranded copper conductor armoured cable XLPE insulated with GI steel wire round/strip armoured PVC outer sheated complete all as Specified and directed by Engineer in Charge

Supply, Installation and testing of rechargeble maintenance free 24 Volts, sealed lead acid batteries, sufficient for 24 hours normal working & then be capable of operating the system for 24 hours during an emergency conditions as required. Volts and backup of life shall not be less than 3 years in suitable MS box complete all as specified and directed.

Supply of dual zone module. Model No. CF-CHQ-DZM Make- Cease Fire.

Supply of Repeater Panel. Model No. CF-FIRELINE AR Make- Cease Fire.

Supply and fix Automatic air release valve 50mm dia suitable for domestic water with 50mm gun metal stop valve complete all as specified and directed.

LIGHTENING PROTECTION WORKS

Supply and fixing aviation obstruction light LED based with minimum 300 Nos red colour LED housed in LM-6 die cast aluminium housing covered with red colour polycarbonate dome with endless (for each Hangar - 02 Nos & OHT - 01 No.)

STREET LIGHT WORKS

Supply and fixing energy efficient LED street light fiiting 60W with pressure die cast aluminium housing with toughened glass having IP-66 degree protection, individual LEDs must have secondary lenses for better throw across and along the road, with sysytem efficiency ≥ 100 lumen/watt, colour rendering index(CRI) of ≥ 70, corelated colour temperature CCT of 4000K appx (Warm White). The luminaire should have surge protection upto 5KV and have an addtional surge protection of 10KV for driver, PF ≥ 0.9 and TD ≤ 10%, operating temperature range from 140 to 270V with the potted driver. the potted driver used shall be of constant voltage type and ISI marked all as per BIS-15885 Part-2, section 13 with efficiency ≥ 85%. The make of driver shall be same as the make of Luminaire fixture, complete all as specified and directed.

All as per srl item No. 13.01 above but LED flood light of 120 watt IP 65 complete all as specified.

Supply & fixing nature switch with sensor for switching on-off along with 10/16 Amp single pole MCB enclosed in Sintex make SMC enclosure conforming to IP 54 for the street lights all as directed by Engineer in Charge.

Supply & fixing junctiion box poly corbonate with glass fibre reinforced , environment friendly recycable, UV resistant , halogan and silicon free anti acid and anti corrosive IP 66/67 in accirdance of with IE rule internally ammbeded gasket, junction box including 3 phase 415 volt alluminium bus bar and one No. MCB SP 6A 10KA to control the street light including necessary clamps, nuts bolts to fix the junction box with poles all specified and directed.

SUMMER APPLIANCES WORKS

Supply and fixing voltage stabilizer for automatic operation,single phase naturally air cooled indoor type with copper wound, designed for input voltage between 170 volts to 250 volts with output voltage stabilized at 230 volt with accuracy of + 2.5% and of capacity 4 KVA with low and high voltage cut off for 2 to 3 minute time relay complete all as specified and directed.

Supply and fixing of Air Cooled Floor mounted package type AC with motor, hermatically sealed scrool fitted compressors, filter, blower section with motor and drive, air cooled air condenser, intial charge of gas and oil, internal regrigerant piping thermostic controls. All the items shall be encased in a sheet metal cabiner of nominal capacity 11 TR all as directed by Engineer in charge (01 Working & 01 Standby) complete all as specified and directed.

Installation, commissioning and testing including initial charging of Eco Friendly refrigerant complete all as specified and directed.

Supply, fixing and testing of refrigerant copper piping with insulation complete all as specified and directed.

Supply and fixing of uninsulated GSS ducting complete of 22 Gauge including screwing and fixing arrangement on angle iron channels of suitable size complete all as specified and directed.

Supply and fixing of uninsulated GSS ducting complete of 24 Gauge including screwing and fixing arrangement on angle iron channels of suitable size complete all as specified and directed.

Supply and fixing of thermal insulation of GSS duct with 6mm thick Nitril insulation complete all as specified and directed.

Supply, fixing and testing of electrical communication cabling between indoor and outdoor unit complete all as specified

Supply, fixing and testing of aluminium powder coated supply air grill with fire dumper all as specified and directed.

Supply, fixing and testing of aluminium powder coated return air grill without fire dumper complete all as specified and directed.

Supply and fixing of double canvas flexible connection complete all as specified and directed.

Supply and fixing voltage stabilizer for automatic operation,single phase naturally air cooled indoor type with copper wound, designed for input voltage between 170 volts to 250 volts with output voltage stabilized at 230 volt with accuracy of + 2.5% and of capacity 1 KVA with low and high voltage cut off for 2 to 3 minute time dealy relay complete all as specified and directed.

Supply and fixing evaporative desert cooler electric driven (single phase) of capacity 5000 cum/hr steel 1500 RPM 230 volt body made out of sheet 18SWG for main body and 22 SWG for side covers duly super enamelled painted with two coats of hammer tone paint Ist quality over a coat of red oxide primer complete inner and outer sides with front grill made out of steel (heavy duty) propeller cooler fan (aluminum blades) 500mm sweep dia with heavy duty motor,AC single phase 230 Volts,50c/s,copper wound with submersible pump complete all as specified.

STNADBY DG SET WORKS

Supply, install, testing and commissioning of diesel engine driven Generating set with acoustic enclsoure (Silent Version) conforming to latest CPCB Norms of 200 KVA or next higher capacity, radiator water cooled, Diesel engine driven developing 326 BHP at 1500 RPM coupled with alternator of capacity 200 KVA delivering out put Voltage 415 Volts +/- 1.0% at set value of 415 V at a frequency 50HZ +/- 0.5% with suitable AVR control panel, all mounted in acoustic enclosure and AMF Logic panel all as per manufacturers design and specification as per CPCB norms confirming to the detailed specifications appended below :- Make : KIRLOSKAR GREEN / CUMMINS/GREAVES COTTON/STAMFORD (i) ENGINE :- (a) General: Suitable for four stroke compressed ignition, radiator water cooled, continuous duty with 10% overload capacity for any one hour in 12 hours running, 50°C intake air temperature. The prime mover provided should be as per IS specifications. (b) Air intake system : Should comprise of dry type intake air filter mounted on engine, one in number vacuum indicator mounted on intake piping. (c) Exhaust System: Should comprise of one exhaust manifold, dry type, mounted on engine, one exhaust silencer which should be positioned in such a way that the exhaust gas is not sucked by the fan on the radiator, thereby affecting the cooling system. The silencer should cater to the noise level tolerance prescribed in the relevant IS/BS. The silencer should be provided with flaps with a provision so that it will open only when the generator is running. The complete exhaust system shall be properly supported so that entire load of the exhaust system shall not fall on the DG Set. A sufficient length of straight pipe shall be provided after the exhaust silencer to leave the gases at sufficient height above the engine and outside the room.

(d) Fuel System: Should comprise of disposal type element fuel filter, pressure type fuel pump mounted on engine, non return check valve in fuel supply and drain lines, wire braided hose between filter and pump, The fuel tank must have proper locking arrangement. (e) Cooling System: Should comprise of radiator with 7 PSI pressure cap mounted on base rail. The thermostat installed in the engine coolant outlet, fresh water pump mounted on engine, fan and fan hub mounted on engine. '(f) Lubricating System: Should comprise of lubricating oil sump mounted on engine, gear driven lub oil pump mounted on engine, lubricating oil cooler-fresh water cooled integral with engine cool out circuit mounted on engine, oil filter lubricating with cap and lubricating oil dip stick for oil level check mounted on engine. The system should be capable of feeding lube oil to the main end & large end bearings, cam shaft, valve rocker gear and all moving parts. (g) Starting System: Should comprise of suitable voltage DC electrical starter mounted on engine, with suitable size and maintenance free battery with in built battery charger to be mounted in trays (having rubber insulation) on the main frame made out of angle iron of 40x40x5mm with in-built charging unit. It should have the provision to charge the battery from external sources during static condition and while running of the generator. (ii) ALTERNATOR: AC alterator shall be horizontal and foot mounted, 200 KVA, 415 Volts, 3 phase, 4 wire, 0.8 PF, 50 HZ, self excited, self regulated, brushless AC generator, suitable for an ambient temperature of 50° C with IP-23 enclosure class H insulation and temperature rise limited to class H as per following technical details.

All as per Srl Item No. 15.01 above but capacity 160 KVA

All as per Srl Item No. 15.01 above but capacity 25 KVA

EOT CRANE WORKS

Supplying installing testing & commissioning of 05 ton capacity EOT Crane double girder box type class-II with a span required for 50.0 mtr cross travel, electrically operated through pendant push button station floor operated type having hook height upto 5.5 mtr approx, trolley with frame, crab, buffers, gears with gear boxes, shafts, rope drum, rope sheaves, wire rope, wheels, lifting hook, platform on one side of the crane, brakes, motors, limit switches, control panel, pendant push button station, micro speed arrangements, wiring etc. complete all as specified & comprises with the following- 1. Capacity 05 Tons (5000 Kgs) 2. Overload Capacity 25% 3. Class Duty II indoor type 4. Lift 5.5 mtrs from floor level 5. Hoisting Speed (Faster) 3 Mtrs per Min Approx 6. Hoisting Speed (Slow) 0.3 Mtrs per Min Approx (Achieved through AC drive) 7. Cross traverse Speed 09 Mtrs per Min Approx creep=3.6 mtrs/min. 8. Longitudinal traverse Speed 09 Mtrs per Min Approx creep=3.6 mtrs/min. 9. Operation Pendant Push Button from floor 10. All electric Motors shall be squirrel cage type: Crane duty 11. Wire Rope 16 mm x 4 fails, 6 x36 construction, fiber core, ungalvanized, Usha Martin 12. Longitudinal traverse Motor twin drive 1 HP each with gear box 13. Cross traverse Motor 1.5 HP 14. Hoisting Motor 7.5 HP 15. Main Girder box type for traverse movement of EOT crane

LIFT WORKS

Supply, insallation testing and commissioning of passenger lift (Less Machine Room ) suitable for 06 Persons (408 Kg) G+04 upper floors complete as specified with following details:- (a) Speed (MPS)- 1.0 MPS (b) Capacity (Kgs)- 408 Kg 06 Persons (c ) Rise - G + 04 Upper floors (16 Mtrs) (d) Stops- 5 Stops with all opening on the same side (e) Controller Type - ACD3-MRL (f) Drive - VF regenerative (closed loop) (g) Power Supply - 400 / 415 Volts, 3 Phase AC (h) Operation - Full collective operation (j) Car Group - One Car (Simplex) (k) Machine - PM Gearless (located in shaft on Top of guide rails) (l) Traction Media - Gflat coated steel belt (m) Car Finish - Rear Mid Panels - Stainless Steel Rear corner Panels - Stainless Steel Side Mid Panels - Stainless Steel Side corner Panels - Stainless Steel Front Panels - Stainless Steel '(n) False Ceiling Type - CD-41 (o) False ceiling Finish - Stainless Steel Hairline Finish (p) Ventilation - Cross flow fan (q) Hand Rails - Stainless Steel Mirror Finish Hand rails on rear car panels (r ) Flooring - Vinyl Tiles

(s) Car door finish - stainless steel t) Pit depth - 1350mm (u) Overhead - 4200mm (v) Hoistway Dimensions required (W x D) - 1600mm W x 1500 MM D (w) Car Dimesnsions - W-1100mm, D-1300mm, H-2200mm (x) Car & Hoistway Door type - Central opening (CO) doors (y) Door opeining - W-700MM x H-2000mm (z) Door operator - DC door operator (aa) COP - COP for stops less than or equal to 12 (950mm in Stainless Steel) (ab) Car Position indicator - Monochrome LCD- Blue back ground & white font Dot matrix (LED) Scroliing Display (ac) Hall fixtures - 02000 Pan Type fixture (ad) Hall fixture face Plate - Stainless Steel (ae) Hall Button arrangement - LCD Monochrome type (af) Standard Features - Anti-nuisance Car Call protection, Independent service (for Duplex only) Overload Device, Nudging, Emergency firemen's Serivce, Emergency Car light Unit, Infrared Curtain door protection, Door time protection, Emergency Alarm Button, Door Open / Close Button, Automatic and Manual Rescue Operation, Belt inspection Drive, Auto Fan cut off. (ag) Options Included- Automatic Rescue operation, intercom, voice synthesizer

RUNWAY AND TAXI TRACK

Providing approved earth (earth and cement to be got approved from GE before laying) obtained from excavation at site, laying and spreading soil 500mm (compacted thickness) below top of sub grade level in two layers (spreading & consolidating each layer with 8 to 12 tonne power roller), pulverising, blending of cement with soil stablization by mixing as per the designed soil mix (to be carried out by NIT/ Govt. College). The composition of layers shall be as under:- (a) Bottom 200mm layer: Spreading, levelling, watering, ramming, pulverising, blending of cement, compacted at OMC in-situ with rotavator & motor grader (quantity of cement to be decided as per approved designed soil mix) and compacted in layers such that each layer shall not be less than 100mm thick & not more than 200mm thick and rolled with 8 to 12 tonne power roller to achieve the desired K value as mentioned in Note below. (b) Top 300mm layer: Soil blended with cement and OMC in WMM plant (quantity of cement to be decided as per approved designed soil mix) and then spread at site, levelled with motor grader, compacted in layers such that each layer shall not be less than 100mm thick & not more than 200mm thick and rolled with 8 to 12 tonne power roller to achieve the desired K value as mentioned in Note below. Note:- The above shall be executed to achieve the desired K value of 5 Kg/ cm²/cm as per relevant paras of Chapter 4 of IRC:SP:89-2010 for cement stabilization complete all as specified and directed by Engineer-in-Charge. (Cement to be used shall be OPC 43 Gde and shall be measured & paid as “Supply Only” rate vide Srl item No. 04 of Sch ‘A’ Part-XVIII). Runway-20250, Taxi Track-19781.25

Material and labour for 150mm thick (compacted thickness) granular sub base course (GSB) grade V compacted in a single layer (specification as per TI 09/2018) over compacted subgrade with stone aggregate by using motor grader, spreading, levelling and rolling with static roller of capacity 80-100 KN (for layers upto 100mm thick only/ vibratory roller of capacity 80-100KN static weight (for layers more than 100mm thick) and consolidation to required gradient and camber complete all as specified. (Runway - 4050 Taxi Track- 3956.25)

Material and labour for 150mm thick (compacted thickness, in two layer layers of 75mm) Wet Mix Macadam (WMM) manufacturerd in WMM plant. Each layer compacted separatwely (specifications as per TI 09/2018), with crushed stone aggregates of specified grading, spreading using sensor paver and consolidated to reqd gradient and camber ocmplete all as specified and directed. Note 18.01 to 18.04:- If the water absorption value of coarse aggregates is greater than 2%, the soundness test shall be carried out on the material delivered at site complete all as specified and directed by GE before execution of this item. (Runway - 4050, Taxi Track - 3956.25)

Providing and laying Dry Lean Concrete (DLC) 150mm thick having compressive strength not less than 7 Mpa at 7 days for each consecutive group of 5 cubes, individual strength of each cube must not be less than 5.5 MPs at 7 days (Para 4.1 IRC:SP:49-2014). (Grading and other parameters as per Table 1 (IRC:SP:40-2014). Minimum cement content must not be less than 140 Kg/cu.m. (Para 4.2 IRC:SP:49-2014) mixed in batching plant, transported to site and laid by sensor paver including spreading and compacting using double drum smooth wheeled rollers with 80-100KN of static/ vibratory capacity including necessary formwork, finishing etc compelte all as specified and directed. Note: Cement to be used shall be OPC-43 Gde. (Runway - 6075 Taxi Track- 5934.38)

Material and labour for 210mm thick Pavement Quality Concrete (PQC) of minimum field Flexural Strength fo 4.5 Mpa Lower Control Limit (LCL) at 28 days in pavement slab using minimum 360 kg of cement per cu.m. as per IRC 44 (only 43 grade OPC must be used in PQC) mixed with non-circular synthetic fibre (as per generic specification given by E-in-C's Br) by mechanical means at the rate of 0.25% by weight of cement per cu.m. of PQC. The max size of aggregate in PQC must be 31.5mm and gradation as per IRC 44-2017 laid spread and compacted with slip-form paver. Curing by mechanical equipment, Texturing-cum-curing machine (TCM) including finishing of surfaces compelte all as specified and directed. (Runway - 8505, Taxi Track- 8308.13)

Supplying and laying 400 micron thick HDPE sheet (Virgin Quality) having minimum weight 390 gm/sqm over sand cushion as specified in the design with overlap between adjacent strips as minim,um 100mm and tranverse joints at ends as minimum 150mm etc complete as specified and directed. Note:- (No addl payment for overlap will be made & contractor shall note this aspect while quoting the rate) (Runway - 40500, Taxi Track- 39562.50)

Material & labour for forming 20mm wide expansion joints 210mm deep for quality concrete slab filled with preformed bitumen joints filler with polyurethane joint sealant for 55mm depth over provision of closed cell polyrthylene rod of 22mm dia sealed with (29mm depth minimum above polyethylene rod )complying with BS 5212 & BS 4254 and EN- 141875 - 2003 (for hydrolysis/ water resistance test) priming the sides and minimum MAF 30%( with TEN years performance guarantee) and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing the masking tape after the application of sealant all as specified. Note:- Sketch showing dimension and sequence/ method shall be provided by GE before execution. (Runway - 190.35, Taxi Track- 185.94)

Material & labour for forming construction joints 10 mm wide and 30 mm deep for quality concrete slabs , cutting with diamond cutter to a depth of 30mm and 10 mm wide to accommodate polythylene rod and sealant 10mm wide , provision of closed cell polyrthylene rod of 10mm dia sealed with (10mm depth minimum above polyethylene rod )Poly urethane sealant complying with BS 5212 & BS 4254 and EN- 141875 - 2003 (for hydrolysis/ water resistance test) priming the sides and minimum MAF + 30% (with Ten years performance guarantee) and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing the masking tape after the application of sealant all as specified and as shown on drg. (Runway - 291.60, Taxi Track- 284.85)

Material & labour for forming contraction (dummy) joints cutting with diamond cutter to a depth of 60mm and 3 mm wide initially and top 23mm portion cut to 6mm wide to accommodate polythylene rod and sealant 6mm wide , provision of closed cell polyrthylene rod of 8mm dia sealed with (10mm depth minimum above polyethylene rod )Poly urethane sealant complying with BS 5212 & BS 4254 and EN- 141875 - 2003 (for hydrolysis/ water resistance test) priming the sides and minimum MAF + 30%( with Ten years performance guarantee) and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing the masking tape after the application of sealant all as specified and as shown on drg. Note:- Sketch showing dimension and sequence/ method shall be provided by GE before execution. (Runway - 1364.85, Taxi Track- 1333.26)

SARAOGI BUILDERS LIMITED