PROVN OF SHED, STORAGE ACCN, ACCN FOR NIGHT PICKET AND OTHER SANCTIONED WORKS AT AMRITSAR CANTT

Amount

B/R PORTION M&L for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watring, and removing surplus soil to a distance n.exc 50 m and making good surface

S&F mild steel Gde Fe-410-W as in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces , cleats etc.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L PCC (1:2:4) type B1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in benching for manholes, bands, coping, bed plate etc including slightly chamfered or rounded angles including including necessary form work, if required, and finishing exposed surface even and smooth using extra cement complete.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep in soft/loose soil and getting out.

M & L cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation concrete.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as concrete bed, laid to falls in trenches in any depth including packing under, and haunching against the sides of SGSW pipes 150mm bore, after the pipes have been laid and tested including complete all as specified and directed

M&L for Reinforced cement concrete M-25(20 mm graded aggregate) as in foundations,including rafts,footings,foundation beams,plinth beams,bases for columns etc complete all as specified and directed.

M&L for reinforced cement concrete M-25(20 mm graded aggregate) as in RCC columns, Pillars,Piers,Posts and struts etc complete all as specified and directed.

M/L for RCC M-25 (20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves etc all as specified and directed.

M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in beams.

M&L for RCC M-25 (20mm graded aggregates) as in Beams,cantilevers,lintels over 1.5 m span complete all as specified and directed.

M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in chajja and fascia

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; laid flat, and similar work; vertical or to batter

Use and waste formwork to sides of Columns, for fair finished surfaces of concrete, complete all as specified.

Use and waste formwork for Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions.

Use and waste of formwork to sides and soffits of floor or roof beams,including supports,Overhangs etc complete all as specified and directed.

Use and waste formwork for Fair finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.

Use and waste formwork to soffits of suspended slabs such as roof slabs,landings and similar work not exceeding 200mm thick complete all as specified and directed.

Use and waste formwork for Fair finished flat Form work to chajjas and similar items including edges

M&L for mild steel TMT bars 10mm dia and over,cut to length,bent to shape ,including cranking,bending spirally for hooping for columns,hooking ends and binding with the including mild steel wire(annealed) not less than 0.9mm dia wire all as specified and directed conforming to Fe-410.

M&L TMT bars 8mm to 10mm dia and over cut to length bent to shape required including crancking spirally for hooking ends and binding with and including MS wire annealed n.less than 0.9mm dia complete all as specified.

Material and labour for TMT bar 6 to 8mm dia and cut to length bent to shape,including cranking,bending spirally for hooping for columns,hooking ends and binding with the including mild steel wire(annealed) not less than 0.9mm dia wire all as specified and directed conforming to Fe-410.

Returning, filling in, including spreading, levelling watering and well ramming in layers, each layer not exceeding 25 cm thick complete all as specified.

Removing surplus spoil to a distance exceeding 250 meter and nexc 500m and depositing where directed.

M&L Hardcore of broken stone gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 75mm thick PCC Type C-2 (1:3:6) as in sub base complete all as specified and directed.

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors as specified.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerb or mud stops,rounded or chamfered on edges and like including weathering slight rounded and throating complete all as specified and directed.

M&L for 40mm thick Cement concrete type B-1,(1:2:4) 20mm graded aggregate as in flooring complete all as specified.

M&L 4mm thick AC sheet as in dividing strip all as specified and directed.

M&L for 15mm thick cement plaster on brick/Concrete surfaces in CM(1:4) finished even and smooth w/o extra cement complete all as specified and directed.

M&L for 5mm thick cement plaster on ceiling surface in CM(1:3) complete all as specified and directed.

M&L for 5mm thick cement plaster on concrete surface in CM(1:3) complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and directed.

M & L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm at 180 degree temperature in each layer ( first layer below APP membrane and second layer above APP membrane) on 0.40 kg/sqm bitumen primer surfaces including cleaning surfaces etc complete all as specified and directed

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified.

M&L for 10mm thick cement plaster on Concrete surfaces over roof in CM(1:4) finished even and smooth w/o extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceiling and applying two coats of white wash to match the existing surface complete all as specified and directed.

M&L for preparation of newly plastered surfacesof walls and applying two coats of white wash on walls complete all as specified and directed.

Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of alkali resistant primer all as specified and directed.

M&L for one coat of white wash on plaster surface of ceiling including prepration of old decorated surface.

M&L for one coat of white wash on old decorated surfaces of wall including prepration of surface.

S&F framed stairs including stringers,treads,landings,balusters,hand rails etc,including cleats,brackets etc (Fe-410-W(Gde-E-250) quality complete.

Supply and laying or fixing or passing through pipe,1100 volt grade heavy duty cable with pvc insulated aluminium solid conductor served with an inner sheathing of PVC of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm nominal cross section in service connections.

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 10 sqmm 2 core with cable gland including taking down old unserviceble cable complete all as specified and directed by Engineer-in-Charge.Make Havells, Finolex/polycab /Havells

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 6 sqmm 2 core with cable gland complete all as specified and directed by Engineer-in-Charge.Make Polycap/Havells/Finolex

Demolition of brick work built in cement mrtar complete all as specified and directed.

Demolition of Cement Concrete (Re-inforced) as in RCC Slabs, beams etc

Dismantling of brick tiles single layer on roof, jointed and grouted/pointed in cement mortar including cleaning serviceable tiles and stacking properly for reuse, disposal of unserviceable tiles and debries/rubbles from site complete all as specified and directed

Demolition of mud in roofs, any thickness including plastering and leaping etc complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or simla pattern roof coverings

Dismantling asbestus cement (corrugated, semicorrugate, etc.) sheets in roof covering

Demolition of PVC Water storage water tanks exc 250 ltrs and not exc 500 ltrs

Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) nxc 1.50 sqm each all as specified and directed.

Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 sqm and n exc 4.00 sqm each all as specified and directed.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

Taking down G.I tubing 15mm bore including connections & clearing for re-fixing or removal to store.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling of structural steel including doors gates ant the like but excluding framed truss etc

Dismantling Timber Fillet of any shape and size, bolted, riveted or pinned together

Dismantling Timber Fillet of any shape and size embeded in brickwork or concrete

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete.

M & L for 100 mm thick, PCC 1:3:6, Type C-2, using 40mm graded aggregate as in Sub base for flooring complete all as specified and as directed.

M & L Brick work built CM 1:6 subclass B brick straight or curved or plan exc 6m mean radius.

M & L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement.

M&L for preparation of newly plstered wall surface and applying two coats of cement Base all as specified as directed by Engr-in-Charge.

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of Primer to match the existing treatment complete all as specified and as directed .

M&L for ATT, Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M&L for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:6.

All as per item No 72 but CM 1:4, 10 mm thick on skirting all as specified and directed

M& L for Box type steel window double (glazed & gauged) emade of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame comprise glazed skelton shutter door frame of ERW tube P-section size 50 mm x 20 mm with two Nos openable leaf cnsisting of two Nos of sash bar of T-sec 20 mm x 3 mm welded to frame with one No vertcale mullion of ERW of ERW box type T-section size of 60 mm x25 mm FI 2 mm thick welded / screwed to frame for fixing of wire guage/glass including fixture and fitting like as handle, tower bolt stopper , cleat, pintal hinges, holdfast primer etc, all as shown on drg No.CEJZ/TD-06/07 and CEJZ/TD/07/07 complete.

Material and labour for Box type steel window made of ERW tube P-section of size 60mmX25mm double frame, comprises of glazed Skelton & gauzed shutter of ERW tube P-section size 50mmX20mm with one/two Nos openable leaf consisting of two nos sash bar of T-section 20mmX3mm welded to frame with one No vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixtures like Handle, Tower bolts, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD 1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1 complete all as specified and directed. (a)Hold fast,150mm long of 12mmX3mm MS flat-04Nos per window (b) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (c) MS Tower bolt 150mm long-02 Nos/leaf (d) Z Section stopper 20mmX25mm,100mm long -01 No per leaf (e) Cleat 55mm long of hollow square 15mmX12mm-02 Nos per leaf Note:- 1. Wire guage, Sheet glass, guard bar and painting shall be measured and paid separetely. 2. Mode of measurement for this item shall be for window portion only excluding ventilator portion where ever shown in drawing.

S/F framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete.

M&L for PCC 1:3:6 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed

S & F factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels.

S&F butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised type C-21 all as specified.

S&F extruded aluminium alloy handles, fabricated type, anodised all as specified of size 150mm long

S&F extruded Aluminium alloy handles fabricated type size 125mm.

S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or ectruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed.

S&F butt hinges medium weight cold rolled mild steel complete size 100mm

Supply only butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed

S&F 200mm long aluminum anodized barrel tower bolt of extruded section and fixed all as spd and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section all as specified of size 150mm long

S & F frame work such as grills/guard bars grating etc with ends of bars complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed nails including hacking at old glass complete all as specified and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanized wire staples.

Preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red/zinc oxide primere.

M&L two coats of synthetic enamel paint over a coat of pink primer over wooden surfaces including preparation fo surfaces complete all as specified.

M&L 80mm thick average consolidated thickness, mud phuska on flat roofs including 25mm thick mud plaster and 3 mm thick leeping plaster

M & L 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Hard / Dense soil complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5mtr wide and not exceeding 1.5 mtr in depth and not excceding 10 sqm on plan, getting out etc complete all as specified.

M&L for glazed ceramic coloured tiles 350x250x7mm/450x350x7mm thick as in dado/skirting set and jointed in neat cement slury and pointed in coloured cement to match over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and as directed.

S&F glazed ceramic dark coloured tiles 300x450mmx6-7mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 15mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

M/L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in CM (1:4) all as specified.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

S&F PVC valveless , syphonic action flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve , float and handle including brackets and PVC flush pipe complete all as specified.

S&F rotational moulded polythyene 500 litrs water storage tanks cylindrical vertical with closed top hoisted and fixed in position incl. 20mm dia float valve brass fitting. All as specified and directed

S & F Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe and 600mm long PVC connector 15mm) all as specified & directed by Engineer-in-charge.

S & F Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap & Provision of concrete bedding and making good to floor all as specified & directed by Engineer-in-charge.

S&F Vitreous China urinals, halfstal type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;

S&F Stop valve of PTMT for 20 mm bore of pipe any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm92gms)

S&F Angle stop valve of PTMT for 15 mm bore of pipe any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms

S&F in repair for 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed

S&F concealed Stop valve of PTMT any colour high pressure with long shank and cup (concealed type), (Minimum weight 15mm-110gms/20mm112 gms) screwed for iron pipe and fixed.

S & F Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms).

S&F in repair Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed, fancy type.

S & F swivel Shower of PTMT any colour for fixing with 15mm pipe(min weight 40 grm) . Including shower arm

S&F in repair shower of PTMT any colour of with or without swivel joints,any size including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms

S&F PVC connections 15mm size with PTMT nuts of length 600mm

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F PVC (SWR) floor trap 110mm bore.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 110 mm bore PVC (SWR) bends of any radius.

S&F 110mm bore PVC (SWR) bends any radius With access door

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door.

S & F 110 mm bore PVC (SWR) Vent Cowl

Supply and Fix 15mm bore water tubing medium grade galavanised with all fittings and is fixed complete to walls and ceiling or laid in floors.

S & F mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 primer coated complete all as spd.

S&F IInd class hardwood, panelled shutters 35mm thick (any number of panels) with panel of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.

S/F 35 mm thick glazed and Skelton shutters IInd class hard wood open rebated prepared to receive in SSR part-I class 8 (R) glass gage dividing in squares size of member as per specified

S&F IInd class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply on both faces. (The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated) complete all as specified and directed

S & F Solid PVC door frame of size 50mmx47mm made out of 5mm colour PVC sheet, edges will be painted to match with colour sheet, reinforced with MS square tube & fixing in opening.

S & F Factory Made Solid Panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS Tubes for top & bottom rails, MS frame shall be covered with heat moulded colour PVC sheet and 5mm thick x 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm used instead of exposed portion of PVC sheet beading.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face &2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing.

S&F MS 300mm long ordinary Helical mild steel stove enameled black door springs including rollers and roller plate Complete.

M&L SGSW drain pipes 150mm bore laid in trenches and jointed incl demolition and breaking up drain pipes ( salt glazed ware, AC or Reinforced concrete ) set in cement mortar. as specified and directed. Incl deomlition of existing line

Removing excavated soil to a distance not exc 50m away and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

All as per Srl item No 67 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 50 shall be reused after necessary cleaning of mortar)

M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as cover slab for manhole and similar work etc complete all as specified and directed.

Cutting into exisiting manholes for connecting new drains, making good to pipe and rendering ,cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished , and reforming benching as required for 150mm/200mm/300mm bore of pipe.

M&L for Machine pressed pre-cast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment

M&L Providing, cement concrete Type C1, 1:3:6 ((20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed .

M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces

Supply only Flush pipe of polythylene of low or high density or PVC,32mm dia for low level cistern.

Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr and S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

Taking down or up steel tubing 15mm bore and connections and supplying, fixing and testing galvanised steel tubing 15mm bore “medium grade” with all fittings complete fixed to wall/ ceiling or laid in floors complete all as specified and directed

All as per Srl item No 147 above but 20mm bore of pipe

Taking down or up galvanised steel tubing 15mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and directed

All as per Srl item No 149 above but 20mm bore of pipe

S&F in repairs chromium plated angle valve 15mm bore fancy type screwed down for high pressure complete all as specified and directed.

S & F Grating doom 100mm dia with wast hole of PTMT (Min weight 25 gms).

S&F in repairs 100mm dia CP grating with or without hinge type or hole type complete all specified and directed.

Dismantling of 100mm bore cast iron drain pipes, jointed in cement mortar and taking out of trenches , if required

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement with WPC complete all as specified and directed. Note:- WPC shall be meausred and paid separetly.

Supply only integral water proofing compound.

M&L for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc. and Brushing neat cement slurry with 3.0 Kg of cement per Sqm.

All as per srl Item No 159 here-in-before but as skirting/dado over rendering 15mm thick in CM 1:4.

M&L Plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling as mass concrete complete all as specified.

S&F Post and struts in fencing including cutting top to shape as directed, drilling holes, notching for wire etc, flat iron fillets (For securing wiremesh) including all necessary drilling, boulting, or reveting etc and similar work confirming to FE-290 Gde E165

Supply only Chain link MS Galvanised fencing any size or type

Fixing only chain link fencing including line wires , any mesh any size, and type to any type. Of standard, rails, streightning bolts etc, including provision of binding wire

S&F 5 to 10mm dia of neck, MS Screws bolts (Machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but n.exc 15cm long

S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge Make:-supremo,Finolex,Jyoti.

Ditto but laid in trench or in floor

S&F PVC (SWR) branch (double Y) 110mm bore any radius with access door.

S&F in Repair Galvanised iron two strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs @ 75mm c/c spacing and straining and fixing to any type of standard rail, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, stapples or steel pin, complete all as specified. Note : Each line of wire to be measured.

Cutting holes in brick walls built in CM for inserting hold fast of depth n exc half brick thick from the face of the jamb into wall and making good dismantled portion in cement concretre 1:2:4 type B-1 as reqd

M & L for PCC 1:5:10, Type E2, (40 mm graded aggregate) as in foundations, filling and mass concrete

M&L for 38 mm wide Glass dividing strips , 3 mm thick and inserted in position to conform to design

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick walls built in CM 1:4

M&L for 25 mm sand filling under/over floor in foundations includings watering and consolidation

E/M PORTION M & L Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including conceled conduit concealed/ fixed on wall / ceiling with suitable clamps, screws, etc or concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-Make of wire :- Finolex /Polycab/RR Kabel (a) One light point/Bell/Fan point controlled by one switch.

All as per Srl item No 175 above but for One 3 pin 5 amps switch socket on independent board.

All as per Srl item No 175 above but for One 3 pin 5 amps switch socket on same board.

All as per item No 175 herein before but with cable 2.5 sqmm (nominal area) multistranded copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continous earth wirte PVC insulated 1.5 sqmm copper multistranded conductor connecting to common earth and earth dolly complete all as specified and directed Note for items Nos 2&3 :- (a) The wiring shall be done in proper colour coding using red,yellow and blue for phase,black for neutral and green for earth leads.Make of wire :- Finolex /Polycab/RR Kabel

Supply and fix Socket outlet 2 in 1, 3 pin 5 Amps Flush type. Make Anchor/SSK/Plaza

Supply and fix Switch outlet 2 in 1, 3 pin15 Amps Flush type. Make Anchor/Plaza/SSK

Supply and fix stepped type electronic fan regulator flush type all as specified and directed. Make Anchor/SSK/Plaza

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant/batten fittings complete all as specified and directed. Make Anchor/SSK/Plaza

S & F in repair MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make Schneider/Siemens/Legrand

Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed. Make Anchor/SSK/Plaza

S&F Exhaust fan 300 mm sweep including cutting of walls , louvers nut and bolts etc including connection complete all as specified and directed.Make Havells/CG/Bajaj

S & F 5 Star rated Ceiling fan 1200 mm sweep complete with including fitting and fixtures as per site requirement and complete accessories 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor all as specified and directed. Make Havells ES-50 or equivalent in crompton/Orient

Supply and fix in replacement of security light fitting LED 25 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed. Make Philips/Wipro/CG

S& F GI bracket light grade GI Pipe 1.2 mtr Length for fixing of street light fitting 36/40 Watt including connection all as specified and directed.

Removal of surplus soil to a distance n.exc 50 mtr & depositing where directed at a level n. exc. 1.5mtr above the starting point complete all as specified & directed.

M&L for sand cushioning with layer of sand 8 cm thick before laying of cable and 15 cm after lying of calbe in trenches complete all as specified & directed.

S & F Tubes, 'Medium grade'galvanised of size 20 mm dia with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed including making connection from existing line.

Supply and Fix 20mm bore water tubing medium grade galavanised with all fittings and is fixed complete to walls and ceiling or laid in floors.

S & F PP-R Gate valves (brass insert) OF SIZE 20 mm dia including connection complete all as specified and directed.

Taking down carefully the existing aluminium point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings any type etc by unscrewing and taken away from site complete. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit.

Supply and fix switch piano one way 5 A, SP, 230 Volts.Make Anchor/Plaza/SSK

Supply and fix wall/ceing mounting LED 18 Watt PC Diffuser tube light fitting complet with all aceesories 1x18W LED suitable for domestic application 240Volts 50HZ including one tube rode and internally pre-wired with 1.5 sqmm twin twisted flexible copper conductor and complete Make Havells/ Wipro /Philips

S&F energy saving new generation 10 watt LED, 6000k bulk head luminaire with opal diffuser light fitting complete with all acessories and connection complete. Make : Havells/ Philips/Bajaj

Supply and fixing sleek LED Mirror light fitting provided with high output difuser in 2 ft version complete with all accessories and making all electric connection complete all as specified and directed Make : Havells/ Philips/Bajaj

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 1 runs of 6 sqmm including 1 run of 4sqmm and 1 run of 2.5 sq mm single core multistranded copper conductor PVC insulated cables as neutral continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed including taking down all sub main wiring . Note : 1 Run of 6 sqmm, 1 run of 4 sqmm,1 Run of 2.5 sq mm and 1 run of PVC conduit as mesuared as 1 unit Make of wire RR Kabel/Poly cab/Havells

Supply and fix in replacement of security light fitting LED 36 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed Make : Havells/ Philips/Halonix

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified.Make Schneider/Siemens/Legrand (Note : cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate)

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as specified. (Note : cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) Make Schneider/Legrand/Siemens

S&F MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09 protection with and incl 100 amp 36 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100% complete all as specified.(Note : The cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) Make Schneider/Siemens/Legrand

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified. Make Schneider/Siemens/Legrand

S&F ceiling fan 1200 mm sweep 5 star rated including connecton and fixing arrangement complete all as specified and directed.Make Havells Model No ES-50 or uquivalent in Cromopton /Orient

Supply and fixing ceiling rose surface bakelite 3 terminals 65x32mm complete all as specified Make Anchor/Plaza/SSK

S & F in repair MCB double pole, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make Legrand(Dx3)/Schneider (Acti-9)/Siemens(Betaguard)

S & F in repair MCB double pole, 240 volts, 16 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make Schneider/Siemens/Legrand

S & F in repair MCB double pole, 240 volts, 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make Schneider/Legrand/Siemens

M & L for brick protection to cable using old size sub class 'B' bricks, laidflat, dry butt jointed, laid lengthwise perpendicular to the axis of cable all as specified & directed.

Supply and fixing /laying galvanised pipe 25 mm bore medium grade fixed to pole with clamps nuts, bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed.

Saini Constructions

ESS KAY BUILDER