Repair/maint to certain miscellaneous B/R works including plastering, painting works in Zone B including OTM and EME line at Fort Cantt Allahabad.

Amount

Dismantling of AC corrugated or semi corrugated sheet including AC ridges as in roof or wall covering, complete all as specified and directed.

Asbestos cement corrugated or semi-corrugated sheet, 6 mm thick, fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed.

Asbestos cement corrugated or semi-corrugated sheet, 6 mm thick, fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed. [Expect sheet]

Asbestos cement two piece adjustable plain wing ridge, 6mm thick, fixed with ‘L’ type or ‘J’ type or cranked hook bolts, including taking down existing unserviceable ridge, complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Brickwork with sub class 'B' bricks (old size), straight or curved on plan exceeding 6metre mean radius, built in CM 1:6, complete all as specified and directed.

Rendering 15mm thick in CM 1:6, on brick work or concrete surfaces of walls, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion paint of approved colour over 1mm thick wall care putty, complete all as specifed and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Non - skid jointfree Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

Non skid jointfree ceramic coloured tiles 400mm x400mm x 7 to 8 mm thick, in skirting, dados, risers to steps, etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4), complete.all as specified and directed.

Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 300mm x 200mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.

Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 450mm x 300mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.

Vitrified homogenous tiles (light shade) 10 mm thick, size of tile 600mm x 600mm, in floors. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Vitrified homogenous tiles (light shade) 10 mm thick, size of tile 600mm x 600mm, in vertical surfaces such as skirting, dados, riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 10mm thick bedding in CM 1:4, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded in any mortar, complete all as specified and directed.

Machine cut mirror polished Kota stone slab 20 to 25mm thick, flooring over and including 20 mm thick screed bed in cement mortar 1:6, laid and jointed in grey cement slurry mixed with pigment to match slab including rubbing and polishing mirror finish, complete all as specified and directed.

Machine cut mirror polished kota stone 20 to 25 mm thick over 10 mm thick bedding layer CM (1:4) in riser of steps, skirting, pillar etc laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5sq.m but not exceeding 4 sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.

Taking down shutter of any description exceeding 1 sqm not exceeding 2 sqm each complete all as specified and directed..

Second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed.

Flush shutters 35 mm thick, factory made, kiln seasoned and ASCU treated, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Glazed and skeleton shutters, 35mm thick, second class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with plain, chamfered or rounded mitered beads for securing glass/gauge complete all as specified in SSR Pt- I, section 8, clause 8.24(a) and as directed. Note: Glass or wire cloth, etc. in panels or sash squares shall be measured separately.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed. MAKE:- Sintex / Rajshree plastic / Wood Forex, Indore

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and directed. MAKE:- Sintex / Rajshree plastic / Wood Forex, Indore / M/s Kumar Arch Tech Ltd.

Aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long, complete all as specified and directed.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100mm long, complete all as specified and directed.

Aluminium alloy handles, cast type, anodised, 125mm long, complete all as specified and directed.

Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, 200mm size, fixed in repair, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250mm long, complete all as specified and directed.

Steel windows factory made with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, inlcuding two coats of synthetic enamel paint over a coat of red oxide primer after preparation of the new steel surface, fixed in repair, complete all as specified and directed. Note: Red oxide primer shall be already cattered by the factory.

Steel windows factory made with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, inlcuding two coats of synthetic enamel paint over a coat of red oxide primer after preparation of the new steel surface, fixed in repair, complete all as specified and directed. Note: Red oxide primer shall be already cattered by the factory.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or supporting stand for desert coolers etc., and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

Sheet glass, 3mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specifed and direcetd.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in repair, complete all as specifed and direcetd.

Taking down aluminium door shutter from frame exceeding 1.0 Sqm but not exceeding 3.0 Sqm and re-fixing in same opening after repair of parts such as clip, easing, rubber beads, greasing/ oiling and including replacement of components i.e. middle rail, top rail and handle complete with locking arrangement, replacement of floor door spring for smooth functioning complete all as specified and directed NOTE: The unit quoted rate deemed to include all spare part for smooth functioning of door and any claim won't be entertained on this account.

Preparation of new wooden surfaces exc 10 cm width or girth with sand or emery paper & applying two coats of synthetic enamel paint over a coat of pink primer , complete all as specified and directed.

Preparation of new steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

E-board Make: Everest, Design "Lake and Hill" of size 605mm x 605mm x 4mm thick white prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section (White powder coated). The framework shall comprise of main runner made from 0.33mm thick GS sheet and of size 24mm x 32mm x 300mm and soaced at 1200mm maximum centres securely fixed to structural soffits with hangers of 2mm dia GI wire to be fixed with approved rawl plugs, adjusters and screws. Flush fitting of 1200mmm long cross Tee (with double stiching) to be interlocked between main runners at 600mm centre to form 1200mm x 1600 mm modules cross tee longer than 600mm to be supported independently. 600mm x 600mm doubles to be formed by fittings 600mm long cross tee centrally between the 1200mm cross tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19mm x 19 mm and 300mm long of white colour all as per manufacturers instructions, fixed in repair, complete all as specified and directed. Make of frame work: Armstrong or equivalent.

Mild steel tubing of 25mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings decorative holder and CP brackets, socket and knobs (wall to wall or flush to wall) for securing to curtain rod, fixed in repair, complete all as specified and directed.

Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms), fixed in repair, complete all as specified and directed.

Bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore, fixed in repair, complete all as specified and directed.

Kitchen sink without drainage board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified and directed.

Stainless steel plate rack / utensils rack of size 24" x 24" x 10", fixed to wall with brass screws including provision of necessary fittings / fixtures viz., nuts, bolts and washers of suitable size, fixed in repair, complete all as specified and directed. Make: Prayag Cat Part No P-310 or Blue star Model No KPR-310

Two way angle valve, cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, 15mm bore, screwed for iron pipe or for unions, fixed in repair, complete all as specified and directed.

Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, fancy type, screwed both ends for iron pipe or for unions and fixed, chromium plated with long shank and cup (concealed type), 15 mm bore, fixed in repair, complete all as specified and directed.

Bib taps (fancy type), cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15mm bore, fixed in repairs, complete all as specified and directed.

Health faucet of superior quality ABS body, with 8 mm dia 1.25 m long flexible tube and wall hook for fixing in 15mm dia pipe, fixed in repair, complete all as specified and as directed. .Make:- Jaquar/ Prayag/ Cera

PTMT grating round 150mm size with waste hole, fixed in repair, complete all as specified and as directed.

PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle, jointing with and including provision of 32mm dia 600mm long flush pipe and connections to pipes and fixing of chain and pull, or lever, if any, fixed in repairs, complete all as specified and directed.

PVC connection 15mm size with PTMT nuts on both ends of length 450mm, fixed in repair, complete all as specified and directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including provision of cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe, 'P' or 'S' trap 100mm bore of pipe, fixed in repair, complete all as specified and directed.

Vitreous china floor mounted WC size 755 x 365 x 655mm, white, with flushing cistern, S trap and seat cover including necessary connection, fixed in repair, complete all as specified and directed. Make: Jaquar Model No LYS-WHT-0204 or any techo-commercially equivalent model in any make as approved by GE.

Vitreous China wash hand basin white flat back of size 550 mm x 400mm fixed on cantilever brackets of mild steel angle 35mm x 35mm x 5mm, 32mm dia brass waste coupling, 32mm dia PVC waste pipe rigid quality and PVC connections 15mm bore 450mm long of PTMT, including fixing of taps, fixed in repairs, complete all as specified and directed.

Pillar taps, fancy type, cast copper alloy with capstan head chromium plated fancy type screwed down high pressure with or without lettered 'HOT' or 'COLD' letter with long screwed shank and fly nuts, screwed for iron pipe 15mm bore pipe, complete all as specified and directed.

Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms),complete all as specified and directed.

Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore, fixed in repair, complete all as specified and directed.

PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls including provision of necessary fixing clamps, fixed in repairs, complete all as specified and directed.

PVC (SWR) bends, ISI marked of any radius of 110 mm bore pipes jointed with rubber solvent, fixed in repairs, complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.

Demolition of mud/lime concrete in roofs, any thickness, including plastering, old water proofing membrane and and leeping including brick/brick tiles (whether full thickness removed or only a part thereof) and removing the rubbish from site for distance upto 500m, complete all as specified & directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including brushing neat cement slurry 3.0 kg/sqm, complete all as specified and directed.

Plain Cement concrete 1:2:4, type B-1 (20 mm crushed stone aggregate) as in roof kerb, mud stop, rounded or chamfered on edges, including necessary formwork, complete all as specified and directed.

Providing water proofing treatment over cleaned roof surface with APP modified bitumenous membrane weight not less than 3 kg per sq.m comprising of the following stages ;-: (a) 10 mm thick rendering or screed bed or bedding layer in cement sand mortar 1:4 mixed with water proofing compound @ 3% by weight of cement, finished surface even and smooth without using extra cement. (b) One coat of Bitumen primer confirming to IS-3384-1965 @ 0.3 ltr per sqm. (c) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS-702-1998 for water proofing membrane. (d) Providing APP modified polymeric water proofing membrane having weight not less than 3 kg per sq.m with 100 mm wide side or end lap and joint sealed with flamed torched pasted over full length. (e) Again Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS-702-1998 for water proofing membrane. (f) Spread coarse sand @0.5 kg/sqm over entire bitumen surafce. Note: Water proofing compound to be measured and paid separately.

Supply only integral water proofing compound, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Galvanised, corrugated mild steel sheeting, 0.63mm thick, with two corrugations side lap, fixed with ‘L’ type or ‘J’ type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed.

Galvanised, corrugated mild steel sheeting, 0.63mm thick, with two corrugations side lap, fixed with ‘L’ type or ‘J’ type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed. [Except sheet]

Plain, galvanised, mild steel sheeting, 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa, as in roof covering / cladding to wall fixed with welf tapping screws, fixed in repair, complete all as speified and directed .

Preparation of new steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint (camouflage colour shade) over a coat of red oxide primer, complete all as specified and directed.

Supply only gear box with complete accessories for rolling shutters while servicing the rolling shutter, complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash on wall surface, complete all as specified and directed.

Preparation of old decorated plastered surfaces of ceiling including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying one coat of white wash, complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of acrylic emulsion paint of approved colour, including washing of floor, cleaning of glass, joinery, electrical fittings, wires etc for drop and splash, complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint of approved colour, including washing of floor, cleaning of glass, joinery, electrical fittings, wires etc for drop and splash, complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coats of cement base paint of approved colour, complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of exterior weather paint [ACE of Asian Paint] of approved colour, including washing of floor, cleaning of glass, joinery, electrical fittings, wires etc for drop and splash, complete all as specified and directed.

Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of acrylic emulsion paint on walls surface, complete all as specified and directed.

Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of exterior weather paint [ACE of Asian Paint] on walls surface, complete all as specified and directed.

Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of white colour / approved colour, complete all as specified and directed.

Cleaning of new plastered surface with clean cloths or steel brushes and applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of acrylic emulsion paint on walls surface, complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of all rubbish off from the site, complete all as specified and directed.

Rendering 10mm thick in CM 1:6, on brick work or concrete surfaces of walls, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Rendering 10mm thick in CM 1:4, on concrete surfaces of ceilings, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying three coats of white wash, including washing of floor, cleaning of glass, joinery, electrical fittings, wires etc for drop and splash, complete all as specified and directed.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash, including washing of floor, cleaning of glass, joinery, electrical fittings, wires etc for drop and splash, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved colour over a coat of cement primer, complete all as specifed and directed.

shirdi sai builders

Shivagya Engineering

vs construction

ms shanti sons

M/S A P CONSTRUCTION

Airways Enterprises

Vibha Enterprises

M/S ATUL CONSTRUCTION