SPECIAL REPAIR TO BLDG NO E-14 OF FD HOSPITAL ,ADDN/ALTN TO TOILET BLOCK OF BLDG NO P-384 OF 20 BIHAR , PROVISION OF UTENSIL RACK AT MD ACCN OF 13 PUNJAB AND PROVN OF 6 SPLIT TYPE AC 2TR CAPACITY AT MH UNDER GE GOLCONDA

Amount

Dismantling Asbestos cement sheet (Corrugated/Semi-corrugated etc.) in roof covering complete all as specified and as directed.

Dismantling timber scatling not excedding 40 Sqcm complete all as specified and as directed.

Dismantling timber scatling 40 Sqcm nd over in section, in any position complete all as specified and as directed.

S & F for Rolled mild steel framed, trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, Square section etc ) including distance pieces, cleats, Fe 410-W (Gde-E-250) quality-B,etc complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

M & L for 2nd class hard wood, clean sawn, in scantiling timber fixed with nails complete all as specified and as directed.

Providing and fixing false ceiling at all heights with Aluminium false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as pe IS8225:1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanised @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspened from ceiling using galvaized mild steel items ( galvanizing @ 80 grams per sqm) i..e 50mm long, 8mm outer diameter M-6 dash fastener 6mm dia fully threaded hanger rod upto 1000mm length and L-swhape level adjuster of size 85x25 x 2mm galvanised iron permieter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm ceneter to centre and 50mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge.

Dismantling of stone slab and tiles of any description or thickness in floors, approns laid , bedded and pointed any mortar complete all as specified and as directed.

M & L for Mirror polished 20-25 mm thick machine cut kota stone flooring laid over 20mm thick cement screed in CM 1:6 joint in grey cement slurry complete all as specified and as directed.

M & L Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4 screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed.

Demolition of PCC in ground floor or paving of any description n.exc. 15cm thickness (Un re-inforced) below or above GL complete all as specified and directed by Engr-in-Charge.

M & L 75 mm thick PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) in sub bases, floors and pavings etc.,complete all as specified and as directed.

Demolition of Brickwork masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed.

M & L brick work with fly ash bricks built in CM 1:6 with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius complete all as specified and as directed.

Taking down cement plaster on brick wall/stone wall, ceilings, sunken floors etc, racking out joints, hacking for key & scrubbing with water completelycomplete all as specified and as directed.

M&L rendering 15 mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surface fair and even and smooth complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:4 with WPC on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cement complete all as specified and as directed. (NOTE : - WPC will be measured and paid separately)

Supply only Integral Liquid Water Proofing Compound complete all as specified and as directed.

M&L for providing and applying plaster of paris putty over newly plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Taking down,Chowkhats or frames not exc. 1.5 sq. m each,etc complete all as specified and as directed.

Taking down chowkats or frames with shutters ( without taking of shutter) from frame area exc 1.5 but n.exc 4 Sqm each complete all as specified and as directed.

S & F for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,one soap coat of primer, Filling hollow of frame with plain cement concrete etc., size of frame 125 x 60 mm complete all as specified and as directed.

M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm thick particle board with commercial face veneers on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated etc complete all as specified and as directed.

S & F 35 mm thick IInd class hard wood factory made glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc. complete all as specified and as directed.

S&F Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills, fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap, Glazed Shutter section cut to length and mitre joint with corner bracket having lipping to cover the corners. Elixir, NCL or equivalent stay, handles, 2nos of heavy duty stain less steel pivot hinges, 2no’s towerbolts shall be provided per shutter. The windows should be paneled with 4mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work complete all as specified and as directed.

S&F of Butt hinges medium weight cold rolled mild steel and fixed in 125 mm complete all as specified and as directed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specified and as directed.

S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S & F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified ( short type, fighter jet aeroplane shape type)

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire staples fixed complete all as specified and as directed.

M&L for painting wood and wood based new surfaces of any description, not otherwise described over 10cm width or girth, one priming coat of pink primer on preparation new surface and two coats of synthetic enamel paint on pink primer surfaces complete all as specified and as directed.

S& F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, etc complete all as specified and as directed.

M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, finished even and smooth w/o using extra cement complete all as specified and as directed.

M & L treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, etc complete all as specified and directed.

M & L treating the soil along with the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron., etc complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cm x 30 cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cememnt and pigment including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L PCC M-10 ,1:3:6 (using 40mm graded stone aggregate) as in side of path , finish even & smooth without using extra cement complete all as specified and as directed.

Supply and fix stainless steel kitchen plat rack (non magnetic type) made of 0.85mm thick sheet of size 31" x 36" x 10" complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M & L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms, Wall cading ,over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all as specified and as directed.

M&L non skid coloured ceramic tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.11 sqm but n'exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:3),complete all as specified and as directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match , laid over and including 10mm thick rendering in cement mortar(1:3) as backing coat, complete all as specified and as directed.

M&L Vitrified dark shade ceramic tiles 10 mm thick (square/ rectanglar ) polished, area of each tile not exceding 0.36 sqm , in floor/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:3),complete all as specified and as directed.

M & L for Mirror polished 20-25 mm thick machine cut kota stone flooring laid over 20mm thick cement screed in CM 1:6 joint in grey cement slurry complete all as specified and as directed.

M & L Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4 screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed.

M&L for Reinforced cement concteteType B1, 1:2:4 (20 mm graded stone aggregate) in slabs supported on walls, beams, landings, balconies, canopies, deck slabs and, shelves and similar works etc complete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, inlcuding cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work as flat finishing to rough finished surface of concrete complete all as specified and as directed.

Demolition of brick work or stone masonary, built in cement mortar complete all as specified and as directed.

M&L brick work with class B Bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified and as directed.

M&L for brick work with sub class B brick half brick thick size straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete all as specified and as directed.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc complete all as specified and as directed.

S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable both side Prelam PVC sheet Stile and rails feathered at edges beading and jointed together with solvent cement all as per manufacture instruction complete all as specified and as directed.

S&F of Butt hinges medium weight cold rolled mild steel and fixed in 125 mm complete all as specified and as directed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specified and as directed.

S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F in repairs PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed complete all as specified and as directed.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top )of 1000ltr capecity hoisted and fixed in position all as specified including dismantling old tank complete all as specified.

S & F in repairs 25mm dia CPVC ball valves, screwed both ends for cpvc pipe and fixed complete all as specified and directed.

S & F in repairs 25mm Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule and fixed in repairs complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

S & F 20 mm dia GI tube, 'medium grade', galvanised, with all fitting; laid in trenches, etc complete all as specified and as directed.

M&L 20 mm dia CPVC pipe with all fitting fixed to wall and ceiling in floor complete as specified including taking down existing u/s GI pipe line complete all as specified and as directed.

S & F 15 mm dia GI tube, 'medium grade', galvanised, with all fitting; laid in trenches, etc including removal of U/S GI tubing complete all as specified and as directed.

S & F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and as directed.

S&F in repairs White glazed fine clay sink 750x450x250mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, complete all as specified and as directed.

S&F in reapirs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F in reapirs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S & F in repairs plastic water closet seat , black, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and as directed.

S&F in repairs 15 mm bore two way Bib taps chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule Branded Make complete all as specified and as directed.

S & F in repairs of ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipecomplete all as specified and as directed.

S&F in repairs 15 mm bore stop valve chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule Branded Make complete all as specified and as directed.

S & F in repairs waste coupling of PTMT (half or full threaded), minimum weight 45gms, suitable for discharge pipe of 32mm bore dia complete all as specified and as directed.

S&F in repairs of PTMT towel rail 600mm long fixed with and including Chromium plated brass screws and wooden/ plastic cleats complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised Width of flaps (when open) in 40mm complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg in plinth protection, finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate in sub base of floor , finished even & fair without using extra cement complete all as specified and as directed.

M&L rendering 5mm thick in CM 1:3 on fair faces of brick surfaces of ceiling finished the surface fair and even complete all as specified and as directed.

M&L for providing and applying plaster of paris putty over newly plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper complete all as specified and directed by Engr-in-Charge.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.complete all as specified and as directed.

M&L for 3 coats of white wash on newly plastered ceiling surfaces including preperation complete all as specified and as directed.

M & L Preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Demolition of cement concrete on roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding finished even and smooth using extra cement with WPC complete all as specified and as directed. (NOTE : Supply of WPC will be paid under the respective Item)

M&L priming plastered roof surfaces with bituminous primer @ 0.3 Kg/sqm as per IS-3384 and providing water proofing treatment by applying mineral finish 3.5 Kg/sqm actatic poly propylene (advanced App torch membrane with fiber glass and finished on top with fiber glass mineral states torch incistern of thickness 3 mm by torch bonding complete over and including rendering 10 mm thick in CM 1:4 on concrete surfaces of roofs parapet etc, finishing to surfaces even and smooth with out using extra cement and providing necessary slope incl using WPC @ 3% or as per manufacturer instructions complete all as specified and as directed.

Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.

Dismantling of cast iron/AC/PVC pipes 75 mm dia, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.

PVC(SWR) 75 mm bore pipe single socketed,in any length with rubber ring joints,laid or fixed in any position complete all as specified and as directed.

PVC(SWR) 110 mm bore pipe single socketed,in any length with rubber ring joints,laid or fixed in any position complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 110 mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75 mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 110 mm dia with door access complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75 mm dia with access door complete all as specified and as directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal any radious 110 mm dia with access door complete all as specified and as directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal any radious 75 mm dia with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) Vent cowl 110mm dia complete all as specified and as directed.

Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as specified and as directed.

M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on stone/brick, masonary walls, roof etc including modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site for:- one light controlled by one switch.

All as per Serial item No.106 but for one ceiling fan controlled by one switch & regulator

All as per Serial item No.106 but for one 3 pin socket 6 Amp on independent board.

All as per Serial item No.106 but for one 3 pin socket 6 Amp on same board.

All as per item No. 106 but for One 3 pin 15 Amps switch socket outlet point on independent board with 4.0 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable all as specified and directed.

Supply and fix Modular switch, single pole, one way, 6 Amps one module complete all as specified and as directed.

Supply and fix Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and as directed.

Supply and fix Modular switch, single pole, one way, 16 Amps one module complete all as specified and as directed.

Supply and fix Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed.

Supply and fix Ceiling rose surface bakelite three terminal / PVC / Polycarbonate / isolated body 65x50 mm, terminals 240 volts complete all as specified and as directed.

Supply and fix lamp holder insulated body with back plate complete all as specified and as directed.

Supply and fix modular stepped type electronic fan regulator 220 volts, 100Watt complete all as specified and as directed.

Supply and fix LED lights fitting 1x 40W, 220V, AC decorative box type with powdered coated aluminium housing & integrated electronic driver with THD<10%, 4KV surge protection and 130 lumen/watt including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fix 35W energy saving and environmental friendly long life LED building security street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08, 10KV surge protection and having 130 lumen/watt including connection with twin twisted unsheathed PVC copper cable of suitable size alongwith suitable brackets with clamps, nuts and bolts complete all as specified and as directed.

Supply & fix reading light 6 Watt with touch based on/off switch, touch sensor to change the brightness, night light function and adjustable lamp shade complete all as specified and as directed.

S&F in repair Factory made TPN 4 ways distribution board in sheet steel enclosure double door with suitable rated bus bar, 440 Volts suitable for housing TPN MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed.

Supply and fix Sheet metal enclosure IP-43 double door for DBs(where MCBs are reqd) SPN 240 V, for 8 ways, complete all as specified and as directed.

Supply and fix MCB SP 06 to 32 Amp, 240 volts complete all as specified and as directed.

Supply and fix RCBOs SPN 32 Amp, 240 volts 50Hz AC supply, complete all specified and as directed.

Supply and fix RCBOs TPN 63 Amp, 440 volts 50Hz AC supply, complete all specified and as directed.

M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade with all fittings suitable for concealed type and including taking down old submain wiring complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and as directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store and refixing of ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

M&L fabricated of iron bands,straps,supports or stays for rain water ,ventilating pipes including bolts if required hooks(stay) heavy for large gates ,hook and pintle hinges,large hasps and staples ,chains,hand made slidings bolts clamps hold fasts,wall ties hook for hanging fans,plain angles cleats for securing purlins to wood trusses or rafters ,knee piece inserts two way and three way straps plate washers and similar small articles conforming to Fe 290 Gde E-165, including clamps nuts,bold,fixing and old one complete all as specified and as directed

M&L fabricated ceilling fans down rod both side hole and fixing clamps arrangement size of 15mm heavy duty GI pipe of three feet including taking down old one and fixng complete all complete all as specified and as directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for foundation, laying of poles, cables in trenches and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick complete all as specified and as directed.

Removal of surplus soil to a distance no exceeding 50 mtrs and depositing where directed at a lvevel not exceeding 1.5 mtrs above from the starting point complete all as specified and as directed.

Supply and spread approved dry river sand for cushioning of cable including watering and consolidation, laid in trenches complete all as specified and directed. Note:- Punned thickness shall be measured for payment purpose

M&L brick protection with common burnt bricks sub class ‘B’ of size 230 x 113 x 75mm for cable protection complete all as specified and as directed.

Supply and fix LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in repair Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 4 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and as directed.

S&F in repair 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply and install testing and commissioning of 2 Ton capacity wall mounted split AC 5 star rating with cordless remote control unit, with filters fitted with hermetically sealed compressor operation on 230V +- 10%, 50 Hz AC supply with evaporator and condensing unit made of copper tubes with aluminium fins, MS outdoor stand duly painted, comprising of following complete as per requirement. (a) Insulated copper pipeline for liquid and suction line (upto 3 Mtr) as per site requirement. (b) Flexible copper cable between indoor, stabilizer and outdoor unit of suitable size and length as per manufacturer's recommendations/site requirments (c) Drain pipe with suitable length (d) Suitable size of insulation for covering of refrigerant lines.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and as directed.

S&F in repair single pole and neutral enclosure with a two pin and earth AC plug and socket complete with one single pole 20 Amps MCB complete all as specified and as directed.

S&F XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100volts grade cross sectional area 50 sqmm 3.5 core complete all as specified and as directed.

S&F in repair Isolator, Four pole, 415 volts, 100 Amps complete all as specified and as directed.

NAYANA CONSTRUCTIONS (BID ID -3409778)

harshraj and co (BID ID -3403893)

NAVANAND ENTERPRISES (BID ID -3408550)

BUILDWEL (BID ID -3413783)