PERIOCIAL SERVICES INCLUDING REPARI TO BRICK WORK AND PLASTERING, CHHAJJA REPAIR FOR MD ACCN UNDER AGE B/R-I GE KAMPEE

Amount

M&L for brooming down surfaces of any description and applying one coat of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as specified and directed.

M&L for brooming down surfaces of any description and applying two coat of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as specified and directed.

M&L for brooming down surfaces of any description and applying one coat of white wash on old decorated surfaces of ceiling including preparation of old surfaces & filling cracks and holes etc complete all as specified and directed.

M&L for preparation of old decorated surface of wall and applying one coat of Oil bound distemper complete all as specified and directed.

All as per item No 4 above but two coats of Oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over coat of primer and 2-3mm thick wall care putty complete all as specified and directed.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint on surfaces of walls by roller.

M&L for complete removal of existing treatment of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint).

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,and applying two coats of aluminium paint over and including one coat of aluminium red oxide primer complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed at any height incuding necessary scaffolding.

Material and labour for waterproof/weather proof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces. Note :- (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).

Material and labour for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed at any height incuding necessary scaffolding.

Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint after complete removal of existing surface/plastered surfaces.complete all as directed. Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height incuding necessary scaffolding.

Material and labour for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint after complete removal of existing surface/plastered surfaces as per manufacturer instructions complete all as directed at any height incuding necessary scaffolding. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).

Material and labour for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and directed.

Material and labour for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and directed.

Material and labour for repair to crack including cutting V groove along cracks removing all dust and loosely laid particles using a blower wetting the crack using water and filling the crack using crack seal compound paste as per manufactures instructions and finishing using putty blade complete all as specified and directed at any height incuding necessary scaffolding. Make : Fosroc renderoc CS/ Sika cracksil/ Pidilite Dr fixit 217 Crack x Shrinkfree.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of luster paint with roller finishes on surfaces of wallsincluding scafolding at any height complete all as specified and directed

M&L for preparation of surfaces of roof at any height and applying one coat of tile guard of approved shed including required scaffolding etc.

M&L for preparation of surfaces of floor and applying one coat of floor guard of approved shed to paver tile,blocks,kerb stone etc .

M&L for application of one coat of exterior emulsion paint colour as approved as GE, using ultra clean paint or Dulax ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over the old decorated wall surfaces, edges of slab, roof/chajja projection ana column etc., after necessary preparation all as specified and as directed.

NOTES FOR ITEM NO. 12 to 24 :- (a) The work pertaining to smart periodical services shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding etc of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill.

Demolition of brick work built in cement mortar including all quions arches, pillar etc but excluding ashalar facing dressed stone and pre-cast concrete articles.

M&L for brick work with fly ash bricks old size , straight or curved on plan exc 6 m mean radius , built in cement mortar 1:6 complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed .

M&L rendering 15 mm thick in CM 1:4 using water proofing compound on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .Note : Water proofing liquid compound shall l be measured and paid separately.

Supply only liquid water proofing admixture of make-pidilite or equivalent as per manufacturer instructions complete all as specified and directed.

Material & labour for Rendering 10 mm thick on brick or concrete surfaces in CM 1:6, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation for new surfaces of wall applying two coat of cement base paint on wall over chalk whiting etc complete all as specified and directed.

M & L Preparing New plaster surfaces of wall applying two coats of oil bound distemper over a coat of cement Primer/chalk whiting complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specifed and directed

M&L for preparation of new plastered surfaces of walls and applying two coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1 mm th. white putty even and smooth complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of weather proof paint (Apex) over a coat of primer in any tint complete all as specified and directed .

M & L for PCC 1:2:4, Type B0 (using 12.5 mm graded stone aggregate) 25 mm thick as in sunken floor using liquid integral WPC @ 200 ML/50Kg of cement (WPC shall be measured and paid separately.) complete all as specified and directed

Material & labour for Rendering 15 mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished ven & smooth without using extra cement complete all specified and directed

M & L for two coats of brush bond liquid compound of make fosroc or its equvalent water proofing coating over plastered surfaces of sunken portion (Fosroc chemical Ltd) complete all as per manufacturer instructions and directed by Engr-in-charge.

M&L for PCC type E2 1:5:10 (40 mm graded aggreate) in foundation, filling and mass concrete complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 incl 25mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished rough to receive floor/screed incl demolition of cement concrete floor 40mm thick complete all as specified and directed

M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250 x7mm / 450 x 350x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar 1:4 incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed

S&F for 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 15 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chauging in wall/floor complete in all respect as specified

All as above item No 43 above but fixing only tubes 15mm any grade to walls and ceiling or laying in floors

S&F for 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 20 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chauging in wall/floor complete in all respect as specified

All as above item No. 45 above but fixing only tubes 20 mm any grade to walls and ceiling or laying in floors

S&F in repair rotational moulded PVC water storage tank two layers cylinderical, vertical with closed top of 1000ltrs capacity, hoisted and fixed in position with and including PTMT float valve 20mm dia and making connections for inlet and outlet complete all as specified and directed .

S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed

S&F in repair 110mm bore PVC (SWR) junction single (single T) equal or unequal with oval access door 110mm dia, jointed with approved adhesive complete all as specified and directed

S&F in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed

S&F in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed

S&F in repair 75mm bore PVC (SWR) junction single (single T) equal or unequal with oval access door 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed

S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed

Cutting chases, pinning in making good to facing where required and pointing in cement mortar (1:3) to end or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing etc and making good, cutting n.exc 10 cm width or girth complete all as specified and directed.

Hacking out old broken glass any thickness size and quality from wooden/steel frames etc complete all as specified and directed

S & F sheet glass ordinary quality, 3 mm thick and glazing with oil putty in square n. exc. 0.50 Sqm in each pane complete all as specified and directed

S&F 3mm thick figured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm each pane

S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 6525.00]

DIVESH HARISH SIRIAH (BID ID -3317103)