EOR to Keshav Mahavidyalaya Pitampura, Delhi, during 2021-22. (SH- Providing and Fixing Vitrifed Floor Tiles in Hostel Room, Replacement of Damaged Rusted G.I. Water Supply Line with PVC Tank, Replacement of Paver Block,

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made bytable vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, allcomplete as per manufacturer's specifications & direction of Engineer in-Charge. 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern

Providing and fixing multi walled thermo clear glass type 10mm thick clear of required blue, brown or green colour etc. polycarbonate multi walled sheet of required brand such as GE of Polygal make or equivalent as per approved by Engineer-in-Charge. The sheet shall be fixed on tubular steel structure with 25 micron thick powder coated aluminiumAlcox or equivalent section of size 60x18x2mm and weight not less than 0.462kg/m and weather proof Neoprene or EPDM rubber gasket on both side of joints and top, so as to make the whole structure water tight as per approved design/drawings. The aluminium section shall be fixed on joints and both end of sheet to fixed the sheet rigidly on steel frame structure. The weather proof neoprene and aluminium profile shall be fixed and sealed with silicon scalene to make the joints fully water proof. The open over head end of polycarbonate sheet to be sealed with powder coated aluminium channel of 1Ox10x1.5mm thick and weight not less than 0.2kg/m. the polycarbonate sheet and profile shall be fixed with self-taping and self-drilling 50mm long screws fixed not more than 150mm center to center. The rate shall be inclusive of cost of all material involved such as polycarbonate sheet, aluminium profile, aluminium channel, EPDM gasket, self-taping screws, nut bolts, silicon sealant or any other material required for fixing the sheet but excluding the cost of steel structure which shall be aluminium profile. Hoisting in position etc. complete as per direction of Engineer-in-charge. The rate shall also include the cost of all T&P and safety precautions required during execution of the work. The work shall be completed in all respect as per design/drawing and direction of Engineer-in-charge. (Finished curved surface area of polycarbonate sheet end to end of roofing shall be measured in square meter for the purpose of the payment.

Attending day to day complaints to assist carpenter, plumber, mason and other misc. work for maintenance and repair job by engaging one no. beldar as per direction of engineer-in-Charge. (The duty hours of beldar shall be treated as 8 hours equal to one day job.)

Attending day to day complaints relating to plumbing work i/c necessary T & P required to carry out the job through one no. skilled plumber as per direction of Engineer-in-Charge complete. (Material will be provided by the department free of cost at Sewa Kender whichever is required to attend the complaints). (The duty hours of plumber shall be treated as 8 hours equal to one day job.)

Hiring of skilled operator for one shift from 9.00 A.M to 5.00 P.M for the existing system .Skilled operator shall be certified by the approved Mfr./supplier for smooth operation for the same. Before start the system certificate shall be submitted to the Engineer-in-charge.

Providing and fixing 10 mm thick toughened glass automatic sensor based sliding gate system door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper, automatic sensor etc. to be paid separately).

Credit on account of dismantled aluminium sections received after dismantling of doors/windows/ventilators/ partitions etc which shall be the property of contractor and nothing extra shall be paid on account of carriage etc as per the direction of engineer-in-charge

Credit on account of Dismantled material received after dismantling CI pipe/steel/GI pipe/MS angles/MS sheet/MS door frame/MS flushing cishren etc which be the property of the contractor and shall be removed from the site of work as per direction of Engineer-in-Charge (Nothing extra shall he paid an account of carriage.)

Supply , Installation , Testing & Commissioning of Automatic Sensor based Sliding Gate System made out of minimum 12 mm thick transparent toughened glass material with necessary frames , mountings i/c necessary accessories & control system i.e. Microprocessor pnael with suitable size motors, Motion Sensor-Receiver complete with providing & fixing top mounting rails of suitable size as per direction of Engineer-in-Charge complete as required at site.

Abhilekh Yadav