Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.4 LAccepted-AOC SR NO 281 3 7 ANAND NAGAR NEAR DHANORI JAKAT NAKA LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹13.4 L+₹2.0 L (17.8%)Rejected-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹13.5 L+₹2.1 L (18.2%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
25 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MH and RH KIRKEE
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Kirkee Pune 411003
COMPREHENSIVE MAINT OF BLDG IN OTM AND MD ACCN FOR DGQA UNDER GE MH AND RH KIRKEE
2022_MES_554978_1
8313/E8
Open Tender
Civil Works
Item Rate
180 days
GE MH and RH KIRKEE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH and RH KIRKEE
₹40,000
19 Nov 2022
28 Sept 2022
27 Oct 2022
28 Sept 2022
25 Oct 2022
13 Oct 2022
28 Sept 2022 - 18 Oct 2022
Amount
Hacking out old broken glass panes 3 mm thick from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including. necessary new oil putty or with existing metal beadings complete.
Hacking out old broken glass panes 3 mm thick from wooden framed shutters including, putty/wooden beading and supply and fix sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.5 sqm in each pane including necessary oil putty/wooden beads complete.
Supply and Fixing wooden beads of 1st class HW of sectional area n.exc. 3 Sqcm for glazing/gauzing beads for replacing of old decayed beads including painting the beads with two coats of synthetic enamel paint over a coat of pink primer to match with existing colour.
Taking down damaged putty with out taking out glass and applying new oil putty to hold the glass.
Supply and fix in repairs extruded aluminium alloy handle fabricated type anodised of size 100 mm complete, all as specified and directed.
Supply and fix in repairs extruded aluminium alloy handle fabricated type anodised of size 150 mm complete, all as specified and directed.
Supply and fix in repairs galvanized MS wire cloth, 0.63 mm nominal dia of wire & average width aperature 1.40 mm & fixed with tinned tacks or galvanized wire stapples
Supply and fix in repairs door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 140 mm. Note for Aluminium work : Thickness of anodising shall not be less than 10 microns for aluminium anodised fittings.
Supply and fix in repairs hydraulic door closer of designation No.3 Universal type cast iron body suitable for doors of weight between 61 to 80 Kg.
Taking down defective aluminium door with glass panes and repairing floor stopper, bearing alignment etc. including replacement of any item required for proper functioning and refixing in the same position.
Supply and fix in repairs double action floor spring aluminium body hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover , governing pivot made of brass, other parts made of MS heavy duty universal type conforming to relevant IS.
Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down
Supply and fix in repairs tubular towel rail aluminium anodised 20 mm dia 'D' type 60 cm long between flanges.
Supply and fix 0.50 mm thick aluminium sheet covering to bottom portion of toilet doors and verandah side fixed with aluminium alloy screws including taking down defective/broken sheet.
Supply and fix in repairs bracket for curtain rod as per sample approved by Engineer-in-charge.
Supply and fix in repairs 20 mm dia aluminium conduit for curtain rod.
Supply and fix in repairs 100mm long hinges medium weight cold rolled mild steel and fixed.
Supply and fix in repairs 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed.
Supply and fix in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed.
M&L for spot welding for repairing steel windows and ventilators hinges, brackets, steel handles etc all as specified and directed.
Resecuring or grinding and adjusting steel window shutter and greasing and oiling to the shutter for easy movement including any welding required to make good the shutter all as directed by the Engineer-in-Charge.
Supply and fix in repairs MS handle for steel window as per sample approved by Engineer-in-charge.
S & F in repairs MS steel window stays of size as per site requirement or as directed by Engineer-in-Charge
Supply and fix in repairs PVC flushing cistern 10 ltrs capacity valveless, syphonic action type including inlet, ball valve, float, handle and brackets etc.
Supply and fix in repairs plastic seat and cover superior quality closed pattern with flat bottom of heavy duty including necessary hinged devices, for EWC.
S&F in repairs wash hand basin vitreous china white flat back of size 550 x 400 mm including PVC flexible waste pipe 32 mm bore 450 mm long PVC connection pipe, chromium plated brass waste fittings 32 mm including 15 mm bore chromium plated pillar taps complete all as directed
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as directed.
S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm Make Nirali/Silver shine
Taking down existing pillar cock/ bib cock and fixing the same after repairs/ replacement of washers etc.
Taking down existing bib tap and refixing the same after repairs/replacement of washer and spindle etc.
Taking down existing stop cock and refixing the same after repairs/replacement of washer, defective parts etc.
Taking down existing wall mixer/sink mixer/basin mixer and refixing the same after repairs/replacement of washer, spindle defective parts etc.
Supply and fix in repairs mild steel purpose made bracket for supporting WHB / Sink etc.
S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor all as spfd and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, seat cover complete , all as specified and directed.
Supply and fix PVC waste pipes 40 mm dia with necessary fittings including taking existing 40 mm PVC waste pipes.
S & F in repair waste coupling 32 mm dia of PTMT (half or full threaded) minium weight 45 gram.
S&F in repair 75 mm bore PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints, fixed on walls complete all as specified.
S&F in repair 110 mm bore PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints, fixed on walls complete all as specified.
S & F in repairs 75 mm bore PVC (SWR) bends of any radius with access door
S & F in repairs 110 mm bore PVC (SWR) bends of any radius with access door
S&F in repair 75mm dia pipe PVC (SWR) branch piece, double (double Y), equal or unequal.
S&F in repair 110mm dia pipe PVC (SWR) branch piece, double (double Y), equal or unequal.
S&F 75mm dia PVC (SWR), junction single, (Single T) equal or unequal complete.
S&F 110mm dia PVC (SWR), junction single, (Single T) equal or unequal complete.
Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing for following bore of pipe, complete all as specified and directed by Engr-in-Charge.
Taking up or down steel tubing 20 mm dia and connection including cleaning for refixing for following bore of pipe, complete all as specified and directed by Engr-in-Charge.
Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and directed by Engr-in-Charge.
Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and directed by Engr-in-Charge.
Re-fixing 15mm bore old steel water tubing and connections in new or old position of walls, ceiling, floors etc complete. Note : Serviceable pipes & fiitings obtained shall be re-used
Re-fixing 20mm bore old steel water tubing and connections in new or old position of walls, ceiling, floors etc complete. Note : Serviceable pipes & fiitings obtained shall be re-used
Supply and fix in repairs PVC connection pipe 450 mm long heavy duty nylon thread reinforced suitable for 15 mm dia pipe.
S & F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle fancy type screwed down screwed for iron pipe or for brass ferrule and fixed complete for 15 mm bore
Supply and fix in repairs 15 mm dia CP pillar cocks to wash hand basin/sinks.
S & F in repair bib tap standard of PTMT any colour screwed for iron pipe and fixed,15 mm bore (minimum weight 90gms)
S & F in repair shower rose chromium plated 120 mm with or without swirel joints including fixing to steel pipe of 15 mm bore
S&F in repairs two way bib tap 15mm chromium plated Make : Jaquar Cat Part No CON-041 KN or equivalent in Grohe / Kohler
Supply & fixed in repairs 15mm bore angular Stop valves, cast copper alloy, fency type, chromium plated with long or short shank and cup ( concealed type) screwed down high pressure , screwed both ends for iron pipe or for unions.
S&F in repairs Health faucet brass chromium plated with 8mm Dia, 1 Meter Long Flexible Tube chromium finish spring type & Wall Hook fixing to 15 mm bore of pipe all as specified and directed. Make : Jaguar/ Grohe / Kohler
S&F in repairs 15mm Brass CP wall mixer tap including provision for overhead shower for mixing "Hot or Cold" water screwed down for iron pipe all as directed
Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.
Supply and fix 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.
Demolition of brick work, PCC block mansonry or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.
M&L for Pre-cast cement concrete block masonry of PCC 1:3:6 Type C1 using 20mm graded stone aggregate with solid blocks straight or curved on plan , exc 6m mean radius and exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note : Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to control efflorescence & fungal growth) as approved by GE.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
Taking down cement or cement lime plaster from brick walls etc including racking out joints, hacking for key scrubbing down with water etc, all as specified and directed.
Material and labour for rendering 15mm thick in CM 1:6 on brick surfaces or concrete surfaces & finishing the surface even & smooth without using extra cement all as specified
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified & directed.
Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to s tore and rubbish off the premises
M&L non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry to match the work using colour tiles over and including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified & directed.
M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified & directed.
All as per item No 74 above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering as in backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.
M&L glazed ceramic tiles (350x250x7mm or 450x300x7mm) colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over & including 10 mm rendering as in backing coat in CM 1:4, all as specified and directed.
M&L Coloured Non Skid ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 all as specified and directed.
Ditto all as per item No 77 above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering as in backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.
M&L for Pre polished Chequered rubburised and glossy finish cement tiles 30cmx30cmx 25 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 completed in all respect.
M&L for crushed sand filling under floor including consolidating for laying paver block all as specified and directed by Engr in Charge.
M&L for 80mm thick coloured machine pressed interlocking rubburised and glossy finish paver block any shape and size conforming to IS 15658-2006 of M-40 Grade laid all as specified and directed by Engineer-in Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.
M&L for 75mm thick PCC M-10 grade (nominal mix) using 40 mm graded stone aggregrate as in plinth protection, Path, floor construction joint after every 2 mtr interval and from wall will be filled by mastic of bitumin/Compound grade 'A' all as specified and directed.
M&L for cement concrete M-15 grade (nominal mix) using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc.
M&L for 18-20mm thick machine cut machine polished Kota stone slab flooring laid and jointed in neat cement slurry mixed with pigment to match the shade including cutting and polishing over and including 15 mm thick screed bed in CM 1:3 complete all as specified and directed by Engr-in-Charge.
All as item No 86 here in before but in one piece on vertical surface as skirting over and incl 10 mm thick rendering as in backing coat CM 1:3 to receive kota stone/slab etc all as specified and directed.
Racking out joints of tiles of any description and M&L for filling of white cement in joint of tiles in any size colour to match existing complete all as specified and directed.
Material and labour for grinding and polishing of terrazzo floor with machine complete all as specified & directed.
All as per item No 89 above but in skirting/dado (grinding/ polishing by hand)
M&L for polishing to old existing Kota stone flooring i.e, cutting, grinding, joints pigment filling and polishing to get mirror finish complete all as specified and directed.
All as per item No 91 above but in skirting/dado (grinding/ polishing by hand)
M&L for 18-20 mm thick Granite slab machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade including cutting with polshing, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1 :4 complete all as specified & directed.
M&L for 20-25mm thick machine cut cudappah stone slab over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1 :4 complete all as specified & directed.
M&L for preparation of old plastered surfaces of wall and applying one coat of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for preparation of old plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed.
M & L for applying one coat of white wash on wall including preparation of old surfaces with putty in hole or uneven surfaces complete all as specified and directed.
M & L for applying one coat of white wash on ceiling including preparation of old surfaces with putty in hole or uneven surfaces complete all as specified and directed.
M&L painting to wooden surfaces of any description over 10 cm width or girth incl prepration of new or untreated surface and applying two coat of synthetic enamel paint over one coat of pink primer all as specified.
M&L painting to old wooden surfaces of any description over 10 cm width or girth incl prepration and applying one coat of synthetic enamel paint all as specified.
Dismantling wall and ceiling boards (Fiber pulp, insulation etc or insulation boards any thickness including cover fillets.
Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.
S&F 19mm thick gypsum semi - perforated edge 60 x 60 cm as in ceiling board laid over GI grid all complete for all heights as per specifications and as directed by Engineer-in-charge.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws including dismantling old roof sheet CGI / PGI complete all as specified & directed by Engineer-in-Charge.
S&F in repair Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165
Supply and fixing in repairs CP soap dish holder complete all as specified and directed.
S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 20mm dia and fixed. (Minimum weight 20mm-210 gms complete as directed.
S&F in repairs brass CP Towel Ring (of approved pattern) complete all as specified and directed.
S&F in repair 2nd class hard wood plain, solid, straight chowkat, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in cupboards, almirah, door in any position including polish complete all as specified and directed.
S&F in repairs 18/19 mm Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as sepcified and directed.
S&F in repairs cup board knobs 40mm size with all fixing screws etc complete all as sepcified and directed.
S&F in repair Hasp and staple 100mm long, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws.
S&F aluminium louvered ventilators of section size 100mm x 25mm x 1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator all as directed by Engr-in-Charge. Note : 4 mm thick glazing & stainless steel wire mesh 0.56 mm dia with minimum aprature of 1.40 mm shall be deemed to be included in unit rate quoted.
M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer all as specified and directed by Engr-in-Charge.
S.R.M.K Enterprises
s.k.engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .