Providing Power Distribution Board compound lighting and Misc electrical work NIA

Amount

SHI: Power Distribution Board and MCCB

Supplying and fixing of Following way, Vertical type TPN (Three phase and Neutral), sheet steel,Ready to use MCCB submain power distribution board (SMDB) with MCCB as incomer and MCCBs as outgoing devices, 415 volts, Conforms to IEC 61439-2, IP 43 Ingress protection ,on surface or existing frame, complete with following accessories, metal door, tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCCBs and accessories)

8 Way MCCB submain distribution board suitable for 250 Amp MCCB as incomer and 100 Amp MCCB as Outgoing. (Make: L&T SMDB - TN250D, O/G 100A 8ways Cat DA20D1084CZZO as or similar superior Make)

Metering Extension box for above submain distribution board

Side Cabling box (Left and Right) for above submain distribution board

Corner Cabling box for above submain distribution board

Mounting box for above submain distribution board

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders/ Metering devices in existing cubicle panel/ MCCB submain distribution board including making connections, etc. as required

100 Amp rating, Three pole, MCCB with variable Thermal-Magnetic Release, (Release Range 25-32,50-63) breaking capacity 25KA at 415V, 50HZ, AC Supply and Conforms to IS/IEC 60947-2 (Make and Model ,M/s L&T DN0-100C or equivalent similar superior make) with (Ics = 100% Icu)

200 Amp rating, Three pole, MCCB with variable Thermal-Magnetic Release, (Release Range 160-200A) breaking capacity 25KA at 415V, 50HZ, AC Supply and Conforms to IS/IEC 60947-2 (Make and Model ,M/s L&T DN1-250C or equivalent similar superior make) with (Ics = 100% Icu)

Three phase LCD Multifunction meter indicating V, A, F, pf, Power, Energy (M/s L&T MM 4410 CD eter Cl 1 or equivalent similar superior make with C.T's--- 1 Set.

Supplying of following capacity/Rating and Poles, Change Over Switch, with sheet Steel enclouser and front operating handle,suitable for operation on 415V, 50Hz, Three Phase, AC supply, Installation the same on wall or existing frame , making interconnections with suitable size wires , testing, commissioning etc. as required at site .

On Load ,200 Amp rating ,Four Pole, AC 23 Category,with advance neutral, conforms to IS/IEC:60947-3

Providing, laying and fixing following dia uPVC pipe (Class-3) in ground complete with uPVC Fittings for laying of Cables , including cutting the Cement Concrete flooring ,making / trenching (75 cm deep)and re-filling Cement concrete etc as required at site

75 mm size including fittings

63 mm size including fittings

40 mm size including fittings

Providing and fixing one no, 530 x 450 x 175 mm (nominal inner dimensions /size) all weather, Poly carbonate , SMC Meter Box, with IP54 protection, side hinged openable door and suitable for outdoor installation complete with DIN rail, & pole clamps , fixing the same on the existing pole/wall making interconnection etc. complete as required. (with out MCB )

Supplying Installation, testing and commissioning of following pre-wired,surface / recess mounted LED light fixture of all types, complete with all accessories, with integrated electronic driver , and lamps etc.,suitable for operation on 230 Volts, 50Hz, Single Phase, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

1200mmx300mm (Nominal dimension), 36 Watts (+/- 2 Watts), Surface mounted Type, energy efficient LED cool white luminaire along with all accessories and driver suitable for operation on 230 Volts, 50 Hz Single Phase AC Supply complete as required. (M/s. Havells model no.PLANOSUR4X1PLS36WLED857S0720 or similar make).

10 W,6500K, LED, energy efficient Batton with extruded polycarbonate (for mirror light) ( M/s HAVELLS model LUMILINEBS10WLED865SPCWH or similar superior model of preferred make)

Providing and fixing M.S. Angle iron Stand /bracket for installtion of Electrical equipment, fixture and switchgear, fabricated out of the followings , including cutting, welding, painting and fixing the same on wall /floor, making good the damage,minor civil work etc as reqd at site.

40x40x5mm angle

Supplying of one number of following sizes XLPE insulated PVC inner sheathed Aluminium conductor Armoured cable of 650/1100V grade conforming to IS: 7098(Part 1) 1988 WITH UPTO DATE AMENDMENTS , etc as required at site (ISI marked).

3.5 Core x70 Sq.mm. Aluminium Conductor Armoured Cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 70 sq. mm (32mm)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Above 35 sq. mm and upto 95sq. Mm (clamped with 25x3mm MS Flat Clamp)

SHII: Compound Lighting

SITC of 70 Watt ,LED street light luminaire in a single piece, powder coated , pressure die cast aluminium housing with high efficient LED with minimum luminous efficacy 140 Lm/w as lighting source , thermal shock and High impact resistance toughned Glass cover in front, IP66 Protection , pole mountable , maintenance free , duly wired complete with associated accessories ,LED driver and suitable for operation on 230 volts, 50 Hz AC supply i/c connections etc. as reqd. (M/S Havells model ENDURA OMNIPLUS Cat No ENDURAOMNIPLUSSL70WLED757SASYTOPC or equivalent similar superior make)

Providing and fixing Energy efficient, with IP65 Protection,25W,6500K, LEDs Post Top Lantern ,for symmetrical light distribution , with spun aluminium landscape and with high power LED ,suitable for installation on pole of Dia up to 70mm i/c Providing and fixing GI pipe Bracket/suitable Arrangement for installation and connection with 1.5sqmm copper conductor FRLS PVC cable testing commissioning etc complete as required at site. (Havells CORALPT25WLED757PSYMTOPC or equivalent similar superior make)

Supplying Installation Testing and Commissioning of following wattage,5700 K and System Luminous Efficacy with lm/ W >105, LED Flood Light Luminaire with following Features 1) Epoxy powder coated pressure die-cast aluminium housing (ADC12) with heat sink 2) High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >140 lm/W and viewing angle of 120° 3)Wall or surface mounting using adjustable MS cradle with SS angular dial for precise angular mounting of luminaire 4) Operating voltage range: 140 V-300 V AC 5) Operating temperature: -10°C to+45°C 6) No harmful UV & IR radiations and Environment friendly 7)High quality toughened glass cover fixed to housing.

8)PC modular lens plate for better uniformity of light distribution 9)Independent non potted ,IP67 electronic LED driver with APFC, control gear for better thermal management with complete internal wiring 10) Out door heavy duty Aluminium Pressure die Cast body control gear box housing prewired with built-in, isolated electronic LED driver with APFC (SMPS based constant current supply) with lower THD, Output Short / Open Circuit protection, Over Voltage protection, Surge Voltage protection up to 10 kV with SPD & other reliability test as per IS 15885 Part-2/Sec 13 capable of remote installation and easy maintenance. ( Make M/S Havells ,Philips/ Bajaj)

100W (M/S Havells JETAIRISFL100WLED757ARWBLTG with integral Control Gear Assembly or similar superior make of Philips/ Bajaj)

Providing and fixing one no, 250x200x105mm (nominal inner dimensions /size) all weather, Poly carbonate , SMC junction Box, with IP54 protection, side hinged openable door and suitable for outdoor installation complete with DIN rail, & pole clamps , fixing the same on the existing pole/wall making interconnection etc. complete as required. (with out MCB )

Supplying and fixing following way, Horizontal/Vertical type SPN / TPN, sheet steel, MCB distribution board, 240/ 415 volts, on surface/ recess, complete with metal door, tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)

12 Way SPN Double Door

Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

5 amps to 32 amps, 240 volts Single pole.

5 amps to 32 amps, 240 volts Single pole and Neutral .

Supplying and fixing of G.I bracket for mounting of LED street light fitting on wall fabricated out of 40mm dia G.I pipe (medium class) of 1.2 Meter length having suitable machine made curve with suitable size of reducers/ 40mmx3mm flat iron clamp and shall be painted with two coats of red oxide and two coats of aluminium paint including numbering complete as required.

Supplying of one number of following sizes XLPE insulated PVC inner sheathed Aluminium conductor Armoured cable of 650/1100V grade conforming to IS: 7098(Part 1) 1988 WITH UPTO DATE AMENDMENTS , etc as required at site (ISI marked).

2x6 Sq.mm. Aluminium Conductor Armoured Cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

2 X 6 sq. mm (19mm)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Providing and fixing 8 SWG dia G.I.wire on surface or in recess for loop earthing along with existing surface / recessed conduit /submain wiring /cable as required.

Supplying and laying 3X2.5 sqmm copper conductor round flexible multistrand unarmoured pvc insulated and PVC sheathed copper cable in air for electrical connection of the existing street light fitting etc.as reqd. cable.

Supplying and embedding 32mm dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.