801279/A PROVN OF EXTERNAL SERVICES TO CENTRAL SEWAGE DISPOSAL SCHEME IN DOMESTIC AREA AT AFS, YELAHANKA, BANAGALORE

Amount

GENERALSUMMARY NOTE: Schedule ‘A’ Part I to X are prepriced by MES under Ser No. 2.00 to11.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lump sum price worked out by the contractor for “BUILDING WORKS ” as listed in Sch ‘A’ Part I

Lump sum price worked out by the contractor for “SITE CLEARANCE” as listed in Sch ‘A’ Part II

Lump sum price worked out by the contractor for “INTERNAL WATER SUPPLY ” as listed in Sch ‘A’ Part III

Lump sum price worked out by the contractor for “INTERNAL ELECTRIFICATION ” as listed in Sch ‘A’ Part IV

Lump sum price worked out by the contractor for “ROAD/PATH/CULVERT/REPAIR WORKS IN CULVERT ” as listed in Sch ‘A’ Part V.

Lump sum price worked out by the contractor for “CHAIN LINK FENCING/STEEL GATE AND REPAIRS ” as listed in Sch ‘A’ Part VI.

Lump sum price worked out by the contractor for “SEWAGE DISPOSAL” as listed in Sch ‘A’ Part VII .

Lump sum price worked out by the contractor for “AREA DRAINAGE AND REPAIRS ” as listed in Sch ‘A’ Part VIII.

Lump sum price worked out by the contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part IX

Lump sum price worked out by the contractor for “EXTERNAL ELECTRIC SUPPLY” as listed in Schedule ‘A’ Part X .

Note:-Schedule ‘A’ Part XI is not prepriced by MES and prepriced rate indicated as 0.00 under Col.6 signifies this fact only. Bidder shall insert their rates in Green filed under Col-6.

SCHEDULE`A'PART-XI(MISCELLANEOUS ITEMS) S&F rungs formed out of MS rod of 16mm dia for steps(encapsulated with PVC) of 180x270mm, 130mm concealed with concrete and 140mm projected complete all as directed.

Material and labour for construction of valve chamber of internal size 600 x 600 x 600mm deep withone hollow block masonry in cement mortar 1:4 & PCC foundation in cement concrete 1:3:6 type D2 and cement sand mortar 1:4 for rendering/ plastering 15mm thick, 40mm thick PCC 1:2:4 type B1 coping, including angle iron frame using ISA 40x40x6 mm thick duly fixed at the top fabricated with 3 mm thick MS plate chamber cover with hinges to angle iron frame with necessary lock and key arrangement and MS frame and cover duly painted with two coats of synthetic enemel black paint over a primer coat of zinc chrome including necessary excavation and earth work in any type of soil etc including removal of surplus soil and rubbish n. exc 50m distance,including demolition of old valve chambers complete all as specified and as directed.

Material and labour for construction of valve chamber of internal size 900 x 900 x 900mm deep withone hollow block masonry in cement mortar 1:4 & PCC foundation in cement concrete 1:3:6 type D2 and cement sand mortar 1:4 for rendering/ plastering 15mm thick, 40mm thick PCC 1:2:4 type B1 coping, including angle iron frame using ISA 40x40x6 mm thick duly fixed at the top fabricated with 3 mm thick MS plate chamber cover with hinges to angle iron frame with necessary lock and key arrangement and MS frame and cover duly painted with two coats of synthetic enemel black paint over a primer coat of zinc chrome including necessary excavation and earth work in any type of soil etc including removal of surplus soil and rubbish n. exc 50m distance,including demolition of old valve chambers complete all as specified and as directed.

S&F SFRC heavy duty cover of dia 560mm(clear span) with frame 900mm outer to outer for manholes for following specification as per IS 12592(2002) ,Make high tech concrete complete all as directed:- (a) FI 90x1.35mm thick outer cover (b) 4mm TMT wire mesh(core wire) with hook 4mm (c) 8mm TMT bar@100mm C/C at bottom (d) 10mm TMt bar@100mmC/C at top (e) 16mm TMT bar for flushed handles (f) RCC M35 design mix concrete, outer cover/collar of metal sheet 1.4mm and width 90mm complete all as directed

Supply& apply Nitto bond solution for construction joints

S&F water bar in RCC joints for water retaining structures

M&L for construction of automatic flushing tanks of size 1100mmx1100mmx1200mm complete all as specified and as shown on drawing No AFB/TD/98 sheet 1/1 dated 30/03/1998

S&F Greese trap of medium size, 72litre capacity complete all as directed.

M & L for 150mm bore dia spigot and socket end reinforced cement concrete pipes class NP-3, manufactured with sulphate resistance cement, laid and jointed with flexible rubber ring confined gasket joints all as per IS:458-2003(second Reprint-2007) complete all as specified and directed

M & L for 200mm bore dia spigot and socket end reinforced cement concrete pipes class NP-3, manufactured with sulphate resistance cement, laid and jointed with flexible rubber ring confined gasket joints all as per IS:458-2003(second Reprint-2007) complete all as specified and directed

M & L for 250mm bore dia spigot and socket end reinforced cement concrete pipes class NP-3, manufactured with sulphate resistance cement, laid and jointed with flexible rubber ring confined gasket joints all as per IS:458-2003(second Reprint-2007) complete all as specified and directed

M & L for 300mm bore spigot and socket end reinforced cement concrete pipes class NP-3, manufactured with sulphate resistance cement, laid and jointed with flexible rubber ring confined gasket joints all as per IS:458-2003(second Reprint-2007) complete all as specified and directed

S & F 160mm dia PVC(SWR) pipe single socket in any length with rubber ring joints complete all as specified and directed

S&F 160mm dia PVC(SWR) bends any radius complete all as specified and directed

S&F 160mm dia PVC(SWR)junction single T equal or unequal complete all as specified and directed

Supply ,install, testing and commisioning of Non-clog submersible Pump set with Electric driven motor A/C,3 phase,415V IE-3 rating complete with electric connections,connected with delivery pipe line, suitable MS channel all as per OEM including required submersible electric cable from panel to pump set, of capacity of 5 HP 1000 LPM, 12 mtr head all as specified and directed by Engr-in-Charge

Supply ,install, testing and commisioning of Non-clog submersible Pump set with Electric driven motor A/C,3 phase,415V IE-3 rating complete with electric connections,connected with delivery pipe line, suitable MS channel all as per OEM including required submersible electric cable from panel to pump set, of capacity of 7.5 HP 1300 LPM, 12 mtr head including all fixing arrangements 3 phase star delta or fully automatic complete all as specified and directed by Engr-in-Charge

Supply ,install, testing and commisioning of Non-clog submersible Pump set with Electric driven motor A/C,3 phase,415V IE-3 rating complete with electric connections,connected with delivery pipe line, suitable MS channel all as per OEM including required submersible electric cable from panel to pump set, of capacity of 2 HP 300 LPM, 12 mtr head all as specified and directed by Engr-in-Charge

M&L for heavy duty chain pulley block of 1 ton capacity and a lift of 3 metre hand operated confirming to IS3832 with hand chain of grade 30 of IS2429, load chain grade 80 of IS6216 and load hook confirming to IS15560 for horizontal movement of pulley inside the pump house all as specified and as directed.

M & L for DI pipes with socket and spigot ends,class K-9, confirming to IS with inside cement mortar lining laid in trenches including jointing materials rubber tyton joints(Push on type) ISI marked of same make complete all as directed for size of 100 mm bore all as specified directed.Note: Necessary DI specials shall be measured and paid separately under relevant item of SchA Part-IX

M & L for DI pipes with socket and spigot ends,class K-9, confirming to IS with inside cement mortar lining laid in trenches including jointing materials rubber tyton joints(Push on type) ISI marked of same make complete all as directed for size of 200 mm bore all as specified directed.Note: Necessary DI specials shall be measured and paid separately under relevant item of SchA Part-IX

Supply, install and testing of butterfly valves 100mm dia with cast iron body and the resilient valve seat lining moulded black nitride rubber disc-SG iron to TS:1865 SG 400/14 Nylon coated which can handle a pressure upto .5 bar all as specified and as directed.

Supply, install and testing of butterfly valves 200mm dia with cast iron body and the resilient valve seat lining moulded black nitride rubber disc-SG iron to TS:1865 SG 400/14 Nylon coated which can handle a pressure upto 0.5 bar all as specified and as directed.

S&F check valve with flanged ends of any pattern with by pass arrangement,ISI marked including jointing materials and necessary joints and nut bolts with washers of size 100mm complete all as directed Make; Upadhya, Kirlosker, Kartar

S&F check valve with flanged ends of any pattern with by pass arrangement,ISI marked including jointing materials and necessary joints and nut bolts with washers of size 200mm complete all as directed Make; Upadhya, Kirlosker, Kartar

S&F check valve with flanged ends of any pattern with by pass arrangement,ISI marked including jointing materials and necessary joints and nut bolts with washers of size 80mm complete all as directed Make; Upadhya, Kirlosker, Kartar

S&F check valve with flanged ends of any pattern with by pass arrangement,ISI marked including jointing materials and necessary joints and nut bolts with washers of size 65mm complete all as directed Make; Upadhya, Kirlosker, Kartar

S&F check valve with flanged ends of any pattern with by pass arrangement,ISI marked including jointing materials and necessary joints and nut bolts with washers of size 50mm complete all as directed Make; Upadhya, Kirlosker, Kartar

M&L for sub main wiring complete with two runs of 4.0 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20mm dia rigid non metallic PVC conduit and conduit accessories concealed/ roof/wall all as specified and as directed

S&F pole mounted junction box (Street light box) front openable doors fits to base by means of MCB 6 Amps and busbar insulator - 04 Nos with nuts and bolts with fixing arrangment outdoor type of dismension 250 x 170 x 130 mm product code no GS-JB-2817 with suitable screen printed skull and bones for danger notice on middle and top cover of the box. Make - Sintex or equivalent model of other makes.

Supply and fix and connecting up ceiling fan of size 1200mm sweep complete including with,modular type fan step regulator 120W 2 module, cable 3 core of size 0.5 sqmm from ceiling rose to fan, including writing MES No 2cm height with synthetic enamel black paint complete all as specified and as directed Make: HAVELLS Rated 5 Star type : ES 50 Premium 5/ Orient Model - Smart saver 50/Crompton

Supply and fix and connecting up Heavy duty Exhaust fan of size 300mm sweep 1400 rpm complete,with cable 3 core of size 0.5 sqmm from ceiling rose to fan, provision of 3mm thick bakelite sheet cover including writing MES No 2cm height with synthetic enamel black paint all as specified Make HAVELLS type : Turbo force /Crompton/Orient heavy duty

Supply and fix MCB SP 6 to 32 Amps 240 volts 10 KA 50 HZ, C curve all as specified and as directed.

Supply and fix MCB SPN 6-32 Amps, 'B' curve 240 volts 10 KA 50 HZ all as specified and as directed.

M&L for Earthing complete with GI earth plate electrode 600x600x6.3mm thick buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of the plate at a depth not less than 1.5 m below ground level, connected to and including GI wire 4mm dia with GI protection pipe 15 mm dia light grade connected to and including by means of GI bolts, nuts, check nuts and washers all as shown in electric plate No 3 of SSR part I including neccesary excavation earth work in any strata. PCC 1:3:6, type C2 chamber, RCC 1:2:4, Type B1 cover slab 50mm thick with 8mm TMT bar 100mm centre to centre including 8mm dia handle and watering pipe medium grade 20mm bore, funnel, wire mesh, etc all as per plate No 3 of SSR Part-I and testing on completion all as specified and directed.

M&L for Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6.3mm thick buried directly under ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level connected to and including galvanised iron strip 32 X 6mm as earthing lead fixed by means of bolts, nuts, check nuts, washer of galvanized iron and connected to main switch and including GI pipe light grade 40mm bore protection pipe & necessary excavation and earth work in any strata, PCC chambers in PCC 1:3:6 type C1, RCC 1:2:4 type B1 cover slab, 50mm thick with 8mm dia TMT bars @ 100mm C/C both ways, with lifting handle, watering pipe of GI medium grade 20mm dia, wire mesh, funnel, lugs charcoal, salt etc all as applicable and as per plate No 3 of SSR Part-I and all as specified and directed..

Supplying, installing, connecting and testing of transformer step down,outdoor type complete with standard fittings, rated voltage HV side 11KV, LV side 433V-250V HV delta and LV star connection (at no load),AC, 3 phase, 50 c/s capacity 160 KVA, Double copper wound, oil immersed, C.R.GO Core type Naturally cooled, Built-up with class "A" insulation conforming to IS 1180(Part-I)2014 with latest amendment.Continuous Rating ; 160 KVA, No- Load voltage Ratio: 433V/11KV, Tapping on HV (%): +2.5% to-5% on HV in steps of 2.5%, Phase & Frequency: 3 Phase & 50 Hz, Vector Group: Dyn- 11, Cooling:ONAN , Type: Outdoor, BEE 5 star rated TERMINAL ARRANGEMENT: HV Side : Three Nos. Weather proof bare bushing type Terminals & one No. for Earthing including suitable compression gland LV Side; Quadfurcating cable box with suitable compression glands for PVC Cable, One additional neutral terminal will be brought out separately for earthing purpose (0) First filling of new and unused transformer oil IS-335/93 (fourth revision) marked,filtered and tested upto 50KV dielectric strength at 2.5mm air gap between testing electrodes

FITTING:(a) Externally Hand Operated Off - Circuit tap Switch with position indicator and locking arrangement device. (b)Conservator with oil gauge,filling hole with plug & drain hole with plug (c) Undercarriage with four plain rollers (d)Oil - Filling hole cum air release plug (e)Drain valve cum sampling valve (f)TOP Filter valve with plug (g)Rating plate with diagram plate (h)Lifting lugs for transformer (g)Lifting lugs for core (k)Earthing terminals (l)Thermometer Pockets (m)Silica Breather (n)Explosion Vent (o) 150mm Oil temperature indicator p) OLTC(Off load tap changer)Note: PCC foundation for transformer which is included in the above said item shall be as per IE rules and the rate for the same to be included in the quoted rate.

Supply, installing,testing and commisioning diesel engine driven generating set capacity 125 KVA with accostic enclouser complete with foundation as per manufacturer's recommendation ,micro processor based panel 415 V, 3 phase,4 wire comprising the following :- (A) DIESEL ENGINE: Diesel engine multi cyclinder water cooled suitable BHP by considering derating factor of Bangalore for 125KVA DG set at 1500 RPM and engine fitted with exhaust residential type silencer and exhaust manifold with steel flexible pipe dry air filter fuel and lub oil filter ,electric starting starter ,Alternator for battery charging with electronic governor speed variation ±1% ,voltage variation +1% for easy speed control mounted on sturdy channel section steel frame including PCC foundation,fdn bolts all as per manufactures instructions with following specification /accesories:- (b) Engine control panel,sheet metal fitted on engine for easy operation, ignition switch and key ,push button ,cutouts,lub oil,pressure guage ,water temperature guage. (c)RPM run hours meter with cable.(d) Batteries with battery leads.(f) Entire set duly coupled by suitable flexible coupling dynamically balanced .(g) Anti- vibration mounting pads (make:dunlop) (h)Fuel tank fabricated out of 14 guage CRCA sheet of suitable capacity with inlet,outlet and over flow pipe connections with fuel guage.

(j) Initial filling of engine oil as per specifications and manufacturer's recommendations (k) Protection against (i) high cyclinder head temperature (ii) low lub oil pressure(iii) over voltage/low voltage (iv) over speed (v) over current (l)Documents,maintenance and operation mannuals spare parts catalogues, maintananace chart, warranty certificate ,test certificate,panel schematic diagram etc shall be provided in set of 3 copies with tools and 2 years normal maintenance spares as per manufactures recommended list.(m) The acoustic enclosure shall be made out of special sheet metal fabricated on CNC machine and panel will be filled with special grade high density foam,canopy will be fabricated using pre formed section from 16/18 SWG CRCA sheet steel, siliencer, absorption type ,non resistence residential silencer insulated from inside with glass wool to surppress exhaust noise from the engine ,the enclosure is designed for reducing the sound level to enclosure is designed for reducing the sound level to 75dB (A) at 10 mtr from enclosure.

(n) Alternator: Alternator 160KVA at 0.8pf(lag) 50Hz AC, 3phase 4 wire system, 1500rpm and neutral copper wound self regulated through an AVR protected drip proof and self ventilated + 1% voltage regulation max in static condition IP 23 protection insulation H and permissible overload of 10% for 1 Hr in 12 hours complying to IS-8528 part 10 as per approved CPCB norms including all accessories Note : (i) Contractor shall carryout load testing of the DG set satisfactorily for 12 hours including run of 10 % overload for one hour under his own arrangement in presence of Engineer in chagre and officer nominated by the accepting officer. (ii) Fuel/Oil required for load testing of DG set is deemed to be included in the rate quoted by the contractor.

M&L for Returning,refilling in trenches,in two parts,(i) after riddling the excavated soil upto a depth of 30cm for cushioning of cable (ii) spreading ,levelling,watering and well ramming in layers in tranches not exceeding 25cm thick complete all as directed.

S& F Roadway luminaire 60 Watts LED 6000 K with high power LED 60 Watts as light source energy saving & envoironmental friendly, pressure die-cast aluminium top opening, separate driver compartment with 10KV built-in surge protection IP66, optics Asymmetric complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make: Havells ENDURA PEARL PLUSSL 60W LED757 SASYTOPC or equivalent make of CG/WIPRO/Phillips

Supply, Fixing and testing of 4ft LED surface & wall mounted batten LED luminaires , 18/20 Watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integral electronic driver fixed complete including all accessories and provision of PVC sheathed multistanded copper conductor for connection complete all as specified and directed. Make : Havells as per cat No ENDURALINEARNE OBS 20W LED830 SPCWH/ Wipro cat No LM34-251XXX-57DDGI/ Philips cat No BN150WLED20S-6500 PSCOD GR

Supply and fix security light fitting LED 1x25 watt with pressure die cast aluminum housing, with Control driver with efficiency 90 %,with heat resistant glass and IP 65 protection with Sleek pressure die cast aluminum housing,Heat resistant glass with better optics for uniform distribution,including necessary fixing arrengment of clamps,nut,bolts, etc..including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make : Wipro Cat Part No. LR02-291-XXX-57-XX or equivalent make of Philips/CG..

Supply and fix LED batten luminaire surface and wall mounted batten 2ft LED luminaires, 9 Watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integral electronic driver fixed complete including all accessories and provision of PVC sheathed multistranded copper conductor for connection complete all as specified and directed by Engr-in-Charge. Make : Bajaj Model No. LUMILINEBS9WLED865SPCWH or equivalent as per list of makes here-in-after

NOTE FOR ITEM NO 56 TO 59 : (i) The LED lights/luminaries supplied must meet the provision laid down in IS No.16101, 16102 Part I & II, 16103 Part I, 15885 Part II/ Sec 13, 16104, 16105, 16106, 16108:2012 and LM 70 (ii) All LED light products must have replacement warranty of 50,000 hours from the date of completion of the contract (iii) The product will replace free of cost in the following cases:- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1m) below 90% of claimed values of lumen (or lux at 1m) of the LED/Luminaries. (iv) The warranty will be provided on a case to case basis and shall be extended if above clause are included in contract agreement/supply order. (v) The firm must have all India foot print, its own R&D and should be a leading manufacturer of LED lights/luminaries.

(vi)The contractor shall submit the following certificates from the manufacturer for LED light fittings (both light and driver)(a) Surge protection certificate.(b) Type test certificate LM-79, LM-80 for all luminaries along with detailed technical Catalogue duly signed and sealed by the manufacturer. (vii) Owing to continuous innovation and improvements in LED light fittings by manufactures the contractor shall provide latest version of LED fittings with high lumens output and system efficacy which are available in the market during execution of works. (viii) For any change in product or change in catalogue number etc due to technological up gradation letter has to obtain from the lighting company on their letter head signed by an official of National level only. (ix) All the LED fittings shall be identified by printing or fixing stickers duly mentioned the CA number and date of completion. (x) Sample approval must be obtained for any type of LED Light fittings before incorporating in works

M&L for cable route indicator to show LT U/G cable 1100V and route of cable with arrow, made of GI in suitable circle shape 90mm dia and fixed in MS rod 12mm dia 70cm long(all word embossed) and embedded in PCC block of size 30x30x60cm in ground complete all as specified and directed.

M&L for cable route indicator to show LT U/G cable 11000V and route of cable with arrow, made of GI in suitable circle shape as per IS specification (all word embossed) and embedded in PCC block of size 30x30x60cm in ground complete all as specified and directed.

Supply and fixing 15mm dia angle cock,cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for pipe all as specified and directed.

Supply and fixing of Health faucet, 15mm bore, brass chromium plated with 1.2m long flexible PVC pipe & wall hook complete all as specified and as directed.

M/S Janak Raj Gumber

AFSON ENGINEERS & CONTRACTORS

C R R CONSTRUCTIONS

Shekhar Enterprises

ALCO ENGINEERSPVT LTD

RNR CONSTRUCTIONS

Baka Construction