8852/2021-22/E8

Amount

M&L for LED display glow sign PVC board for main office dalhousie and inside the board moulded letter for writing 150/250 mm hight illuminated after provide to power supply for the board and letters are display on the board for " ASSISTANT GARRISON ENGINEER (I) DALHOUSIE " on top of the board and ''(MES)'' at the bottom of the board with both side MES Logo on the board complete with fixing arrangement of the board in the gate coloums with suitable size Angle iron frame and should be fixed to the main gate of office on the top of two vertical coloums with complete grouting and fixing arrangement by using of anchor fastner including testing after fixing of glow sign board complete with PCC work including taking down old board complete all as specified and directed by Engineer-in-Charge.

M&L for LED display glow sign PVC board for Bakloh office of dalhousie and inside the borad moulded letter for writing 150/250 mm hight illuminated after provide to power supply for the board and letters are display on the board for " ASSISTANT GARRISON ENGINEER (I) DALHOUSIE " on top of the board and ''(MES BAKLOH)'' at the bottom of the board with both side MES Logo on the board complete with fixing arrangement of the board in the gate coloums with suitable size Angle iron frame and should be fixed to the main gate of office on the top of two vertical coloums with complete grouting and fixing arrangement by using of anchor fastner including testing after fixing of glow sign board complete with PCC work including taking down old board complete all as specified and directed by Engineer-in-Charge.

M&L for Glow sign PVC board at dalhousie and inside the borad reflector letter for writing 150/250 mm hight and reflected at night for the board and letters are display on the board for " MES IB " on top of the board and ''(MES DALHOUSIE)'' at the bottom of the board with one side MES Logo and another side div sign on the board completewith fixing arrangement of the board in the ground with suitable size Angle iron frame and should be min.1.5mtr above ground level and 100mm bleow ground level with proper grouting by using of PCC work including exc. and removel of soil with taking down old board complete all as specified and directed by Engineer-in-Charge.

M&L for LED display glow sign PVC board for Bakloh cantt main Electic supply installtion and inside the borad moulded letter for writing 150/250 mm hight illuminated after provide to power supply for the board and letters are display on the board for " AGE (I) DALHOUSIE ''(11KV/440V ELECTRICAL SUB STATION NO-2 ) " on top of the board and ''(MES BAKLOH)'' at the bottom of the boardwith both side MES Logo on the board complete with fixing arrangement of the board in the wall surface with suitable size Angle iron frame with proper grouting of anchor fastner, nut , bolt, washer etc fixing arrangement with complete testing after fixing of glow sign board and including taking down old U/S board complete all as specified and directed by Engineer-in-Charge.

M&L for LED display glow sign PVC board for Bakloh cantt main Electic supply installtion and inside the borad moulded letter for writing 150/250 mm hight illuminated after provide to power supply for the board and letters are display on the board for " AGE (I) DALHOUSIE ''(11KV/440V ELECTRICAL SUB STATION NO-3 ) " on top of the board and ''(MES BAKLOH)'' at the bottom of the boardwith both side MES Logo on the board complete with fixing arrangement of the board in the ground with suitable size Angle iron frame and should be min.1.5mtr above ground level and 100mm bleow ground level with proper grouting by using of PCC work including exc. and removel of soil complete with testing after fixing of glow sing board including taking down old U/S board complete all as specified and directed by Engineer-in-Charge.

M&L for Glow sign PVC board at dalhousie and inside the borad reflector letter for writing 150/250 mm hight and reflected at night for the board and letters are display on the board for " AGE (I) DALHOUSIE ''(11KV/440V ELECTRICAL SUB STATION NO-4 ) " on top of the board and ''(MES BAKLOH)'' at the bottom of the board with both side MES Logo on the board complete with fixing arrangement of the board in the ground with suitable size Angle iron frame and should be min.1.5mtr above ground level and 100mm bleow ground level with proper grouting by using of PCC work including exc. and removel of soil complete all as specified and directed by Engineer-in-Charge.

M&L for LED display glow sign PVC board for Bakloh cantt main Electic supply installtion and inside the borad moulded letter for writing 150/250 mm hight illuminated after provide to power supply for the board and letters are display on the board for " AGE (I) DALHOUSIE ''(11KV/440V ELECTRICAL SUB STATION NO-5 ) " on top of the board and ''(MES BAKLOH)'' at the bottom of the boardwith both side MES Logo on the board complete with fixing arrangement of the board in the ground with suitable size Angle iron frame and should be min.1.5mtr above ground level and 100mm bleow ground level with proper grouting by using of PCC work including exc. and removel of soil complete all as specified and directed by Engineer-in-Charge.

M&L for LED display golw sign PVC board for Bakloh cantt main water supply installtion and inside the borad moulded letter for writing 150/250 mm hight illuminated after provide to power supply for the board and letters are display on the board for " AGE (I) DALHOUSIE '' (MAIN WATER SUPPLY INSTALLATION BAKLOH CANTT ) " on top of the board and ''(MES BAKLOH)'' at the bottom of the board with both side MES Logo on the board complete with fixing arrangement of the board in the gate coloums with suitable size Angle iron frame and should be fixed to the main gate of office on the top of two vertical coloums with complete grouting and fixing arrangement by using of anchor fastner including testing after fixing of glow sign board complete with PCC work including taking down old board complete all as specified and directed by Engineer-in-Charge.

M&L Rolled mild steel in compound girders and stanchions lattice girders, arial masts, staging and the like including caps , bases, splices etc. built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners, gusset plates,wire mesh etc. conforming to Fe 410-W (Gde-E-250) quality -A, for fancing anglework /MS fabrication work painting of surface for one coat of primer and two coat of enamenled paint all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed

M&L 15mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces complete all as specified and directed

Applying two coats of white wash on new wall surface including preparation of surface complete all as specified and directed

M&L for preparation of new distampered surfaces of walls and applying two finsishing coat of oil bound distamper (oil emulsion ) on walls, incl 3mm thick wall care putty, complete all as specified and directed

Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed

M&L 75mm thick PCC type C-2 (1:3:6) using 40mm graded stone aggregate as in sub-base complete all as sprecified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in & raming earth/ briken rubble mixed with earth around, in layers n. exc. 25 cm watering, & removing surplus soil to a distance n exc 50m & making good surface in Hard/ldense soil. complete all as specified and directed.

S & F mild steel security chain link fancing 60mm x 60mm with PVC coated mesh made out of 3mm dia MS wire and 1.00mm thick PVC coating including binding wire complete all as specified and directed

M&L 75mm thick PCC type B-2 (1:2:4) using 40mm graded stone aggregate as in sub floor, sub, floors and pavings etc complete all as sprecified and directed

M&L for chequred cement concrete tiles 20cm x20cmx25mm thick set, joined and pointed in neat cement slurry in floors with grey cement and pigment including 15 mm thick screed bed in CM 1:6 including taking down old surface complete all as specified and directed

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tilesto store and rubbish off permises

M&L for non-skid ceramic coloured tiles 7 to 8mm thick (sqare/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface over ciment screed bed 15 mm thick in CM 1:4 base complete all as specifued abd directed.

Supply & fixing Building street light luminaire, LED street light 30/35 watt, IP66 Powder coated pressure die cast aluminium compact High Power LED Street light with heat resistant toughened glass complete all as specified and directed by Engineer-in-Charge.

Supply and fixing street light bracket made out of 32 mm dia light grade GI pipe 1.5 mtr long bent in shape required fixed to pole/wall with two Nos MS clamp made suitable size of flat including nuts, bolts and washer etc complete for fixing of street light fitting all as specified and directed by Engineer-in Charge.

Supplying, fixing, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / ducts /on wall surface as in repairs/replacement of old unserviceable cable of following sizes all as specified and directed.

(a) 2 core 10 Sqmm

(b) 2 core 6 Sqmm

M&L for sand cushioning for cable protection 8 cm below the cable and 15 cm above the cable complete all as specified and directed

Supply and lay burnt bricks sub class `B’ of size 230x115x75mm laid dry over sand cushioning in trenches as protection on the cable all as directed

Excavation in trenches in any type of soil n. exc 1.5mtr wide and n. exc 1.5mtr depth for GI tubing/LT cable and getting out in Hard/dense soil all as specified.

M&L for returning, filling in including sperading, leveling watering and well ramming in layers n. exc 25 cm thick each layers in soil all as specified and directed.

M&L for removal of surplus soil to a distance not exceeding 50 mtr and deposting where directed and at a level not exceeding 1.5 mtr above the starting point all as specified and directed by Engr-in-Charge.

Supply and fix LED post top lantern 25 W made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP65 protection complete with all accessories complete all as specified and directed by Engr-in-charge including replcement of u/s fitting. MAKE -Havells Cat pt No-RUBYPT25WLED757PSYMTOPC or equivalent in CG/C&S

S&F in Test point terminal block made of gun metal or phosphorus bronze size 75x75x5mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. head screw complete all as specified and directed by Engr-in-Charge.

S & F in replacement aluminium strip of size 25 x 3.15 mm fixed with porcelain/PVC saddles and fixing screws etc minimum tow number saddles with screws on and including PVC guttis in each one mtr of length for roof conductors and down conductor above ground complete all as specified and directed

S&F in replacement of air termination single pointed aluminium rod 12 mm dia and 300 mm long and fixed including taking out old ari termination rod complete all as specified and directed.

Material and Labour for Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground any type of soil including rock soil alos (earth pit not less than 2.25 Mtr below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25 x 4 mm as earthing lead by means of bolts, nuts, check nuts, as earth lead complete including 40mm bore dia protection pipe GI medium grade upto 7.5 mtr length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work in any type of soil including rocky soil also, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part-I and connected to earthing test point, main board including testing on completion all as specified and as directed by Engr-in-charge.

M & L for GI pipe Medium grade 40 mm bore with all fittings complete laid in trenches all as specified and directed.

M/s Shakti Electric Works

m/S Varun Gupta