112 H(F)(W)/2024-25

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

Top Channel Holding Clamp

Dropper Holding Clamp

11 KV F Clamp

Guarding Angle Clamp

Danger Board

Holding Clamp for Dropper /T-off/Top

Stone Pad

nut and Bolt

Aluminum lug 250 KVA T/F

Eye Hook with Clamp

L.T. Clamp

LT Shackle Insulator

Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 70 Kms. (distance approx)

PCC Pole 8.5 Mtr. Long

ST Pole 11 Mtr. Long

AB Cable 3x50

AB Cable 3x95

AB Cable 3x120

Distribution Box

XLPE Cable 3.5x240 sqmm

Transformer 16 KVA

Transformer 25 KVA

Transformer 63 KVA

Transformer 250 KVA

Transformer 400 KVA

Line Isolator 800 A 33 KV

11 KV VCB I/C CTR 600/300/5A 350 MVA 24 Volt (1250 AMP)

11 KV VCB O/G CTR 200/100/5A 350 MVA (1250 AMP)

11 KV XLPE Cable 3x185 sqmm

11 KV Cable Jointing kit 3x185 sqmm indoor

11 KV Cable Jointing kit 3x185 sqmm outdoor

ACSR Weasel Conductor

Other matching Materials

Dragging of PCC Pole from dump site to pit site

Dragging of ST Pole from dump site to pit site

Fabrication and Errection of Double Pole Support on PCC/ST Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Errection of Single Pole Support on PCC/ST Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Stringing, Sagging, Binding and jumpering of AB Conductor (3x50) as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of AB Conductor (3x95) as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of AB Conductor (3x120) as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of ACSR Weasel Conductor as per RESSPO Norms

Grouting and Binding of Stay with in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Mounting of 16 KVA Transformer as per RESSPO Norms.

Mounting of 25 KVA Transformer as per RESSPO Norms.

Mounting of 63 KVA Transformer as per RESSPO Norms.

Mounting of 250 KVA Transformer as per RESSPO Norms.

Mounting of 400 KVA Transformer as per RESSPO Norms.

Connection of L.T. XLPE Cable Different Size & Different Places

Laying of underground 11 KV 3x185 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x185 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Indoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Construction of Transformer Plinth size 2x2x1.5 including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Installation of Line Isolator 800 A 33 KV

Installation of 11 KV VCB I/C CTR 600/300/5A 350 MVA 24 Volt (1250 AMP)

Installation of 11 KV VCB O/G CTR 200/100/5A 350 MVA (1250 AMP)

Erection & Commissioning of of 3 Phase/Single Phase Distribution Box with help of clamps (Cost of clamp & Bolt & Nuts shall be borne by contactor ) as per Norms.

Rect. Back old and used 10 KVA T/F

Rect. Back old and used 16 KVA T/F

Rect. Back old and used 100 KVA T/F

Rect. Back old and used 250 KVA T/F

Hindustan Electric Work (BID ID -4829751)