PROVISION OF TYPE-II AND TYPE-III RESIDENTIAL ACCOMMODATION AT DEFENCE COLONY BALASORE

Amount

Lump Sum price worked out by the contractor for "Builidng Works" as listed in Schedule 'A' Section-I.

Lump Sum price worked out by the contractor for "Under Ground sump" as listed in Schedule 'A' Section-II.

Lump Sum amount worked out by the contractor for "Internal Water Supply" as listed in Schedule 'A' Section-III.

Lump Sum amount worked out by the contractor for "Internal Electric Supply" as listed in Schedule 'A' Section-IV.

Lump Sum amount worked out by the contractor for "Road Path, Hardstanding & Culverts" as listed in Schedule 'A' Section-V.

Lump Sum amount worked out by the contractor for "External Water Supply" as listed in Schedule 'A' Section-VI.

Lump Sum amount worked out by the contractor for "External Electricfication" as listed in Schedule 'A' Section-VII.

Lump Sum amount worked out by the contractor for "Sewage Disposal" as listed in Schedule 'A' Section-VIII

Lump Sum amount worked out by the contractor for "Area Drainage" as listed in Schedule 'A' Section-IX

Lump Sum amount worked out by the contractor for "Site clearance and Earthworks" as listed in Schedule 'A' Section-X.

SUB TOTAL OF SCH 'A' SEC-I TO X

Sch 'A' Sec-XI (MISC ITEMS OF WORKS) Note : This schedule is not pre-priced by MES. Contractor has to quote his own rates.

MCBs, 'C' Series, TP and N, 63 Amps, 415 Volts, 10 KA breaking capacity, IS-8828 marked and fixing in DBs (DBs catered separately in schedule 'A' Section IV). Note:- Make of the MCB should be the same as that of DB, catered under schedule 'A' Section-IV.

MCBs, 'C' series, SP, 6 to 32 Amps, 230/240 Volts, 10 KA breaking capacity, IS-8828 marked and fixing in DBs (DBs catered separately in schedule 'A' Section IV). Note:- Make of the MCB should be the same as that of DB, catered under schedule 'A' Section-III.

MCBs, 'C' series, SP and N 32 Amps, 230/240 Volts, 10 KA breaking capacity, IS-8828 marked and rating and fixing in DBs )DBs catered separately in schedule 'A' Section-IV. Note:- Make of the MCB should be the same as that of DB, catered under schedule 'A' Section-IV

MCBs, 'C' series, SP and N, 50 Amps, 230/240 Volts, 10 KA breaking capacity, IS-8828 marked and rating and fixing in DBs) DBs catered separately in schedule 'A' Section-IV). Note:- Make of the MCB should be the same as that of DB, catared under schedule 'A' Section-IV.

Supply only ceiling fans 1200 mm sweep, Fivestar (energy saving fan) white in colour of Aluminium blades (three numbers) and body, double ball bearing, down rod, fan motor, pair of canopy, shackle, assembly kit suitable for SP 230 to 250 Volts, 50 Hz, AC supply including five step high speed electronic regulator capacity 80 watt complete for fixing under schedule 'A' Section-IV. Note:- Fan shall of make Crompton Greaves, model HS-Plus or equivalent model of make specified in Appendix 'B' to Particular specifications.

Supply only exhaust fan 300 mm sweep, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery discharge 1710 cubic metre per hour suitable for SP, 230/250 Volts, 50Hz, AC supply with louvres shutter complete to fix in schedule 'A' Section-IV.. Note:- Fan shall of make Crompton , Cat REF: EXHD300-4-1 or equivalent model of make specified in Appendix 'B' to Particular specifications.

Supply, connecting and Testing 10 Watt, 230 Volts, LED bulk head Light surface mounted housing , high efficency with interated electronic driver including necessary connection complete. NOTE. Light fitting shall be make WIPRO : CAT NO :LL20-111-XXX-65-NE or equivalent model of make specified in Appendix 'B' to Particular specifications. Light fitting of other make specified in Appendix 'B' to Particular specifications of higher capacity may be provided without any extra cost to the department.

Supply, connecting and testing of 1x20 Watt, 230 Volts, LED Light surface mounted integrated batten T-5 with decorative end cap polycarbonate/Glass tube, integrated high effiency electronic driver including connecting complete. Note:- Light fitting shall be of make WIPRO : CAT NO :LL20-281-XXX-65-AL1 or equivalent model of make specified in Appendix 'B' to Particular specifications. Light fitting of other makespecified in Appendix 'B' to Particular specifications of higher capacity may be provided without any extra cost to the department..

Supply connecting and testing of 12 watt 230 Volts, LED Square Light surface mounted downlight with high efficiency electronic driver including necessary connection complete. Note:- Light fitting shall be of make WIPRO : CAT NO :LD80-101-XXX-60-SM or equivalent model of make specified in Appendix 'B' to Particular specifications. Light fitting of other make specified in Appendix 'B' to particular specifications of higher capacity may be provided without any extra cost to the department.

Supply, connecting, sealing and testing of digital type LED display electrical energy metre 10-40 Ampere, AC, 240 Volts housed in thermoplastic metre box including locking arrangement system complete.

Supply, connecting and testing of 1x10 Watt, 230 Volts, LED Surface mounted integrated batten T-5 with decorative and cap polycarbonated/Glass tube, integrated high efficiency electronic drive including necessary connection complete. Note:- Fitting shall be make WIPRO : CAT NO :LL20-111-XXX-65-NE or equivalent model of make specified in Appendix 'B' to Particular specifications. Light fitting of other make specified in Appendix 'B' to Particular specifications of higher capacity may be provided without any extra cost to the department.

M&L for fixing only street light brackets suitable for fixing of LED street light any type/size 1.2mtr long with bending,welding works include i.e. 50mm to 65mm dia. GI Pipe light grade with all fittings like, brackets, angles, nut,bolt all including with bending & welding works all as directed.

M&L for installation of LED type street light fittings of capacity - 45W LED with lens made from die cast aluminium housing , IP 66 protection completed all as specified and directed .Make Crompton Cat No.-LSTV-45-CDL OR equivalent

M&L for cable joint kit for 1.1KV (Earthed) grade cable for Indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable suitable for 70 Sqmm to 150 Sqmm sizes,complete all as specified and directed.

M&L for cable joint kit for 1.1KV (Earthed) grade cable for Indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable suitable for 16 Sqmm to 35 Sqmm sizes,complete all as specified and directed.

M&L for road cutting/PCC/Drain or under boring for passing of cables and correct the top surface as per ground requirement.

Supply and fixing of cable junction box of size 155x210x92 mm made of high grade thermoplastic halogen dust free and weather proof with metallic knock out for cable entry from all sides of boxes including terminals with protection grade IP-66 and suitable for 10 to 16 Sqmm LT/ Under ground cable including clamping material, Make : C&S,Hensel - cat No. KF 1616B or equivallent . Note: Box shall be fixed at 1 metre above ground level.

S&F LED type obstruction light at top of the water reserviour of cap 25,000 GL with all necessary electric connection complete all as directed, Cat Pt No- LTAL100 of C&S Make Bajaj, CG or Equivalent. (Fitting shoule be yellow painted die-cast aluminium alloy housing with 5 parallel circuits with accessories.)

Cable jointing kit for 1100 Volts (earthed) grade XLPE cable of size 4 core x 35 Sqmm for indoor termination cold shrinkable type complete including jointing materials

Cable jointing kit for 1100 Volts (earthed) grade XLPE cable of size 4 core x 35 Sqmm for indoor termination cold shrinkable type complete including jointing materials

Supply and fix Foot Valve conforming to IS 4038, 100 mm (4”) dia.

Supply and fix reflux Valve conforming to IS 4038, 100 mm (4”) dia.

Supply and installation of silent Diesel Engine driven generating set 20 KVA, 32 BHP ,1500 RPM, air cooled of 3 cylinder, 415 volts, 3 phase 4 wirw, engine as per IS 10001/10002 and alternator as per IS: 13364 complete and sound proof canopy as per CPCB norms with foundation complete all as specified and directed by Eng-in-Charge.

M&L for construction of valve pit chamber of size 900x900x900mm(Internal size) with 3-15mm thick MS sheet cover and angle iron 50x50x6mm frame embedded in 15cm thik, PCC coping with locking arrangement with two coats of synthetic enamel paint with internal and external surfaces over a coat of red oxide primer including necessary excavation, removal of surplus soil to a distance not exceed 50 mtr returning, filling in PCC 1:3:6 type C1 in copping plastering in cm (1:4) PCC 1:3:6 type C1 in copping plastering in cm 1:4 and 75mm thick hard core below foundation etc complete all as specified and directed

Supply, install, test and commission indoor panel board of size2100mm x 1100mm x 400mm with 2 mm thick CRCA Sheet of CPRI approved with all necessary frame work with angle iron of size 50 mm x 50 mm x 5 mm thick dust and vermin proof with IP-54 protection provision for bus bar chamber including 04 Nos Aluminium bus bar of 150 Amps for three phase and neutral having requirement in length, provison for fixing MCCB's, cover plate for covering MCCB's with openings for MCCB's knobs including two nos hinged doors, front and rear open, inclined top with locking arrangements,The cabinet and all accessories should be chemically treated with MSR solution for anticorrosive treatment. The panel should be suitable for 415 Volts, 50 Hz, 3 phase 4 wire system and shall be completed with solid aluminium TPN bus bar having 440 Volts grade sleaving and internal connection should be provided with pre-wired with suitable size of copper solid wire/strip for instrument/protecting devices and comprising the following items duly connected with other electrical acessories and marking of all incoming/outgoing feeders for identification of feeders by numerical PVC ring, danger notice board 440 Volts and painting with two coats of grey enamel paint over a coat of primer as directed by Engr-in-charge including mounting the complete panel on wll mounting with necessary bolts, nuts ,washer and PCC 1:2:4 etc complete. The Panel baord shall comprises of the following :-

M&L for construction of valve pit chamber of size 600x600x600mm(Internal size) with 3-15mm thick MS sheet cover and angle iron 50x50x6mm frame embedded in 15cm thik, PCC coping with locking arrangement with two coats of synthetic enamel paint with internal and external surfaces over a coat of red oxide primer including necessary excavation, removal of surplus soil to a distance not exceed 50 mtr returning, filling in PCC 1:3:6 type C1 in copping plastering in cm (1:4) PCC 1:3:6 type C1 in copping plastering in cm 1:4 and 75mm thick hard core below foundation etc complete all as specified and directed

M&L for premixed liquid seal coat applying evenly binder at 9.8 Kg per 10 Sqm, binding with 6.3 mm size stone chipping @ 0.90 Cum per 10 Sqm and rolled to a uniform smooth surface

SUB TOTAL OF SCH 'A' SEC-XI

SOOD ASSOCIATES PVT LTD

NARSINGH DEVELOPERS LLP

M P KHAITAN

BHOWMICK ENTERPRISES INDIA

MAA BHAGWATI ASSOCIATES

DNS CONSTRUCTION COMPANY

surendra infrastructure pvt ltd

D R STEEL CONSTRUCTION COMPANY PRIVATE LIMITED