SPECIAL REPAIRS BLDG TO ROOFING OF CERTAIN BUILDINGS P 87 P 88 AT MEANEE LINES MEG CENTRE TOILETS OF OTM ACCN TB I BLDG NO P 15 AT ADMC AND PROVN OF OVERHEAD SHED FOR BATHING POINT IN FRONT OF BLDG NO T 50 63 AND T 69 of 255 OF ARMY AVN A

Amount

B/R WORKS

Dismantling of single layer Mangalore pattern roofing tiles or similar tiles in roofing complete all as specified and directed.

Dismantling AC sheet (corrugated, semi corrugted etc) in roof covering complete all as specified and directed.

Dismantling wooden battens for tiles, shingles etc of any size including tiling fillets of spacing exc 15cm complete all as specified and directed.

Dismantling timber scantling of any section in framed work in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Pre painted 150 GSM galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick and of trapezoidal profile and cut to required length, one corrugation side overlapping of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws at an intervel of 0.5 m interval in a raw with washer all as specified and directed as Engineer in charge .

Pre-painted 150 GSM galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Rolled mild steel as in roof trusses (framed), trussed purlins crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc.,steel conforming to Fe 410-W (Gde-E- 250) quality-A all as specifeid and as directed.

Plain Cement Concrete as roof kerbs or mud stops and mass concrete, type C-2, (1:3:6), using 40 mm graded stone aggregate complete all as specified and as directed.

Demolition of brick work or stone / PCC /boulder masonry built in cement mortar or lime mortar including all quions, arches, pillars but excluding ashlar facing, dressed stone work of any description all as specified and directed.

Brick work with sub class 'B' bricks built in CM(1:6), straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and as directed.

10mm thick rendering on brick or concrete surface in cement mortar(1:6) and finishing the surface with even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer all as specified and as directed.

110mm bore PVC(SWR) pipes, type 'B' single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and directed.

Preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel over a coat of red oxide primer, complete all as specified and directed.

Taking down cement plaster on brick / stone / concrete surfaces and hacking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Prepartation of new or previously un treated wall surfaces of any description and applying three coats white wash complete all as specified and as directed.

Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and providing 50mm x 50mm coving at the corners with PMC mortar as above, applying prime coat with anti root primer consisting of Shali prime WP WB @ 400gm/sqm, first coat of water based UV resistent elastomeric modified PU liquide membrane consiting of Shaliurethane(R) BTD of STP @ 1 Kg/ Sqm, spreading the fibre glass net of 45 gsm over the entire area, second coat of Shaliurathene(R) BTD of STP @ 1 Kg/ Sqm for elastomeric seamless water proof membrane in two coats to a final DFT of 1.5mm thick having an elongation capacity of over 500% which conforms to ASTM C 836 and ASTM D 6083, complete all as specified and as directed.

E grid False ceiling with grid suspended system of size 600 x 600mm with standard sections consisting of main runner 29 x 24.7 x 0.8mm, cross tee 29 x 24.7 x 0.8mm and wall angle 22.2 x 22.2 x0.65mm, ceiling suspended with 3mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (main runner, cross tee & wall angle of MS galvanised with PPPCGS) including 4mm thick HPSC self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling including one coat of distemper complete including taking down old existing ceiling of any description complete all as specified and directed.

Dismantling floor hearth or wall tiling including including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and directed.

Taking down shutters only of any description area exc. 1 sqm but n.exc. 2 sqm each and removing from site complete all as specified and directed.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing or removal to store complete all as specified and directed

Taking up or down steel tubing 20 mm dia and connections including cleaning for refixing or removal to store complete all as specified and directed

20mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

25mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B-1 using 20 mm graded stone aggregate as in floors 25mm thick, as in sub base to floor complete all as specified and as directed.

Non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but n.exc. 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Glazed coloured ceramic tiles as in vertical surfaces 350 x 250x 7 mm/ 300 x 200 x 7 mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over rendering 10mm thick in CM (1:4) backing coat on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed to wall all as specified and as directed suitable for item above complete all as specified and directed.

Factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with wood free EPS and 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing complete all as specified and directed.

Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100 mm size, type C-21 complete all as specified and directed .

Aluminium handles 150 mm long, cast type, anodized complete all as specified and directed.

Aluminium anodized tower bolt 150mm size complete all as specified and directed.

Steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Rolled mild steel framed work as in brackets with angles cut to shape , drilled and counter shunk for screws including welding etc., of grade Fe 310-0 or Fe 290 n.exc. 10 Kg each complete all as specified and directed.

Pin headed glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Vitreous china bowl type urinal, flat back, size of 465x355x265mm (minimum) white, with grating and union for discharge pipe, waste coupling of PTMT (excluding flushing cistern, flush pipe and waste pipe complete all as specified and directed.

Vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC (SWR) P trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor, fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat, black, closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device etc complete of CERA model cat part No. 2008 including plastic EWC seat cover, coloured, closed pattern with flat bottom and cover of CERA model cat part 2308 and mild steel chromium plated or aluminised hinging device and PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity including brackets, PVC connection 15mm dia & Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs complete all as specified and directed.

110mm bore PVC (SWR) pipe, type 'B" single socketed in any length with rubber ring joints fixed to wall with PVC clamps including taking down existing old pipes complete all as specified and directed.

110mm bore PVC (SWR) pipe, type 'B" single socketed in any length with rubber ring joint laid in trenches or floor including taking down existing old pipes complete all as specified and directed.

75mm bore PVC (SWR) pipe, type 'B" single socketed in any length with rubber ring joints fixed to wall with PVC clamps including taking down existing old pipes complete all as specified and directed.

75mm bore PVC (SWR) pipe, type 'B" single socketed in any length with rubber ring joint laid in trenches or floor including taking down existing old pipes complete all as specified and directed.

75mm bore PVC (SWR) bends type 'B' with access door complete all as specified and directed.

110mm bore PVC (SWR) bends type 'B' with access door complete all as specified and directed.

110 mm bore PVC (SWR) branch piece type 'B' (double Y) equal or unequal with access door complete all as specified and directed

110 mm bore PVC (SWR) junction type 'B' single (single T) equal or unequal with access door complete all as specified and directed

PVC (SWR) multi floor trap 75mm dia type 'B' with grating including joint with solvent cement complete all as specified and directed

110 bore PVC (SWR) vent cowl type 'B' complete all as specified and directed

Taking down and refixing of shutters of any description area exc. 1 sqm and n.exc. 2 sqm each in same opening after necessary repairs complete all as specified and directed.

PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets. In repairs complete all as specified and directed

Bib taps of standard PTMT, any colour screwed for iron pipe and fixed 15mm dia fixed as in repairs complete all as specified and directed

Stop valve of PTMT any colour in screwed for iron pipe and fixed 15 mm dia fixed as inrepairs complete all as specified and directed

Providing and laying water proofing treatment to sunken portion of WCs, bathroom and kitchen etc by applying cement slurry mixed with two component elastomeric acrylic based polymer modified cementitious composite compound coating of make as approved in TI 5/2003 including demolition and removal of existing treatment of any type with the following procedure in sequence all as specified and as directed:- (i) Demolition of existing treatment of any type including cleaning and removal of debris from site. (ii) First layer of cement slurry @ 0.488 kg/sqm of cement mixed with acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm, the layer will be allowed to air cure for 4 hours. (iii) Second layer of cement slurry @ 0.242 kg/sqm of cement mixed with with acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm, the layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iv) 20mm thick screed in cement mortar (1:3) mixed with including supply of liquid water proofing compound as per manufacturers instructions. Contd.. 1.58

Contd. 1.057 (v) Ponding the treated portion atleast 48 hours, if any leakage / seepage observed the entire procedures will be repeated without any extra cost. (vi) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (vii) Sunken portion shall be filled with lean cement concrete(1:5:10), type E-2 using 40mm graded stone aggregate. NOTE :- (i) The sunken slab sloped towards outer face to drain the water in to GI spout pipe. (ii) Coving shall be provided at the junction of slab with the wall. (iii) Nahni trap shall be 10mm below finished floor level and drain pipe dia is larger than the nahni trap size. (iv) The outer end of the spout should be chamfered.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finishing plastered surface even and smooth without using extra cement complete all as specified and directed

Rendering 15 mm thick on fairfaces of brick work or concrete surfaces in cement mortar (1:4) mixed with and including liquide water proofing compound finishing the plastered surface even and smooth without using extra cement complete all as specified and directed.

Rendering 5 mm thick on concrete ceiling surfaces in cement mortar(1:3), finishing the plastered surfaces even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed

Preparation of newly plastered surface of wall and applying two coats of cement base paint over one coat of alkali resistant primer complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed complete all as specified and directed

Granite(of any type) tiles 20mm thick Machine cut, with edge rounded one side laid over 15mm thick cement mortar (1:6) screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 type C1 1:3:6 ( using 20 mm graded aggregate) complete all as specified and as directed.

Vitreous china wash hand basin, white, oval shape of size 560x410mm excluding chain and plug and porcelain stopper but including CI bracket. PTMT waste coupling of 32/40 mm dia, PVC waste pipe 1200 mm long and 15mm dia PVC connection etc complete fixed in repairs complete all as specified and directed.

Taking down and refixing the existing Vitreous china wash hand basin, white, oval shape of size 560x410mm excluding chain and plug and porcelain stopper but including CI bracket. PTMT waste coupling of 32/40 mm dia, PVC waste pipe 1200 mm long and 15mm dia PVC connection etc complete fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black, closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device etc., complete fixed in repairs complete all as specified and directed.

Urinal, flat back of size 465 x 355 x 265 mm white with grating and union for discharge pipe including connections to flushing pipe and waste pipes fixed in repairs complete all as specified and directed.

Urinal partitions of PVC moulded 18-20 mm thick sheets patten as approved complete all as specified and directed.

Bib taps 15mm dia, cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule fixed in repairs complete all as per Prayag Cat No. PIS-08H or techno commercially equivalent makes specified here in after all as specified and directed.

Pillars taps 15mm dia, fancy type, cast copper alloy chromium plated screwed down high pressure with lettered Hot or Cold with long screwed shanks, screwed for iron pipe or for brass ferrule fixed in repairs complete all as per Prayag Cat No. PIS-14H or techno commercially equivalent makes specified here in after all as specified and directed.

Stop valve 15mm dia, fancy type cast copper alloy chromium plated screwed down with long shank and cup concealed type screwed for iron pipe or for brass ferrule and fixed as in repairs complete all as per Prayag Cat No. PIS-18H or techno commercially equivalent makes specified here in after all as specified and directed.

Angle cock 15mm dia, chromium plated, cast copper alloy, screwed down high pressure with capstan head handle screwed both ends for iron pipe or for unions fixed in repairs etc complete all as per Prayag Cat No. PIS-10H or techno commercially equivalent makes specified here in after all as specified and directed.

Twin angle cock 15mm dia chromium plated cast copper alloy screwed down high pressure with capstan head handle screwed both ends for iron pipe or for unions fixed in repairs complete all as per Prayag Cat No. PIS-11H or techno commercially equivalent makes specified here in after all as specified and directed.

Chromium plated health faucet for pedestal patern water closet with chromium plated flexible pipe of length 900mm complete all as per Prayag Cat No. BEA-41 or techno commercially equivalent makes specified here in after all as specified and directed.

Soap dish fancy type of brass chromium plated complete fixed in repairs all as per Prayag Cat No. BA-45 or techno commercially equivalent makes specified here in after all as specified and directed.

Looking mirror 600x450mm with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as per Prayag Cat No. BLM-01 or techno commercially equivalent makes specified here in after all as specified and directed by Engr-in-Charge.

Shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats as in repairs complete all as specified and directed.

Towel rail 600 mm long chromium plated fixed to wall complete all as per Prayag Cat No. BA-01 or techno commercially equivalent makes specified here in after all as specified and directed.

PVC (SWR )floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

PVC (SWR) Gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

Chromium plated grating round/squre110 mm size fixed in floors with solvent cement complete all as specified and directed.

Rendering 10mm thick on stone masonry or surface of brick work/concrete surface in CM 1:6 finished even & smooth w/o using extra cement complete all as specified and directed.

Plain Cement Concrete (1:5:10), type E2, using 40mm graded stone aggregate as in foundation filling and mass concrete as in sunken floors complete all as specified and as directed.

15mm thick rendering in CM(1:4) mixed with Cebex or equivalent water proofing compound as per manufacturers instructions for laying floor finish/ tar felt complete all as specified and directed. NOTE :-Cebex will be measured and paid separately under relevent items.

Applying a coat of Brush bond RFX of FOSROC or equivalent as in sunken floors all as per manufacturers instructions complete all as specified and directed.

Suply only Cebex 100 of FOSROC or equivalent complete all as specified and directed.

Preparation of newly plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Taking down chowkat (without taking of shutter from the frame) area not exc. 1.5 sqm each including making good the disturbed surface in PCC(1:2:4) type B0 or CM (1:3) all as specified and refixing in the same opening complete all as specified and directed.

All as per Sl Item No. 1.091 but area exc. 1.5 sqm and n.exc. 4 sqm each complete all as specified and directed.

Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate, etc complete all as specified and directed.

Plain Cement Concrete (1:2:4), type B0, using 12.5mm graded stone aggregate as in copings, bed blocks, hold fasts etc., complete all as specified and directed.

Factory made second class hard wood plain framed panelled shutters 35mm thick with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle tone veneers, fixed to chowkhat complete all as specified and directed.

Aluminium, anodised, barrel tower bolt length of 200 mm, extruded section and fixed complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring fixed in floor complete all as specified and directed.

300mm long alluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc. 0.5 Cum, getting out ,returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering,and removing surplus soil to distance n.exc 50 mtr and making good surface complete all as specified and directed.

Plain Cement Concrete as in foundation filling and mass concrete, type D-2, (1:4:8), using 40 mm graded stone aggregate complete all as specified and as directed.

Rolled mild steel work as in tubular trusses, posts, purlins etc., including special shaped washers etc., complete using ERW or incduction butt weld tubes conforming to IS 1161-1979 Gde St-240 and painted with one shop coat of zinc chromate primer including preparation of surfaces at contractor's workshop before fabrication complete all as pecified and as directed.

Rolled mild steel work as in plates (plain or chequered) chanels, square cut or notched (ordinary and counter shunk) forming holes, with reveted,bolted or welded attachment grade Fe 410-W Gde E-250 quality-A complete all as specified and directed.

Brass chromium plated shower rose 125mm size with or without swivel joint including fixing to steel pipe or union complete all as specified and directed.

Vitreous china wash hand basin, white, flat back of size 550x400mm excluding chain and plug and porcelain stopper but including CI brackets, PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection, pillars taps fancy type cast copper alloy,stop valve fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia etc complete fixed in repairs complete all as specified and as directed.

PVC (SWR) pipes 75mm dia type 'B' single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

PVC (SWR) vent cowl 110mm dia type 'B' complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortor complete all as specified and directed.

Plain Cement Concrete, (1:3:6), type C2 using 40 mm graded stone aggregate as in bed to drain pipes including forming cradles for PVC(SWR) / RCC pipes after they are laid and tested suitable for 200mm dia bore pipe complete all as specified and as directed.

Reinforced Cement Concrete pipes, class NP3, of 200mm dia laid in trenches and jointed complete with collars all as specified and directed.

Excavating in over areas and n.exc. 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sq m on plan and n exc. 1.5m in depth and getting out in hard /dense soil complete all as specified and directed.

Hard core of guage n.exc. 63mm deposited, spread, levelled and laid in layers n.exc. 15cm thick, watered and well rammed to a true surface of broken boulders complete all as specified and directed.

Reinforced cement concrete, M-25(Design mix) as in foundation for footings complete all as specified and as directed.

Reinforced cement concrete, M-25(Design mix) as in columns complete all as specified and directed.

Reinforced cement concrete, M-25(Design mix) as in beams and slabs complete all as specified and directed.

Reinforced cement concrete, M-25(Design mix) as in cantilevers, bressumers, lintels over 1.5m span complete all as specified and directed.

Reinforced cement concrete, M-25(Design mix) as in chajjas complete all as specified and directed.

Form work to sides of footings and plinth beams complete all as specified and directed.

Form work to sides of columns complete all as specified and directed.

Form work to sides of lintels tie beams, roof slabs and chajja complete all as specified and directed.

Returning, filling in, including spreading leveling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed.

Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Plain Cement Concrete (1:2:4), type B-1 using 20 mm graded stone aggregate as in floors 40mm thick, as in sub base to floor complete all as specified and as directed.

TMT steel bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

TMT steel bars 8mm dia bars, cut to length bent to shape required as in stirrups including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Rotational moulded polythene water storage tank of capacity 500 ltrs (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position with inlet and outlet including dismantling of old water tank of any discription complete all as specified in SSR part I and as directed.

Gun metal globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Cutting into existing manholes for connecting new drains by cutting out existing benching for and forming branch, channel (1/2 round or ¾ section) in cement concrete (1:2:4)type B-1 smooth finishing & making good to pipe as per existing by rendering & reforming benching as reqd for 200mm bore pipe complete all as specified and directed.

PVC (SWR) multi floor trap 110mm dia type 'B' with grating including joint with solvent cement complete all as specified and directed

Plain Cement Concrete, (1:3:6), type C2 using 40 mm graded stone aggregate as in bed to drain pipes including forming cradles for PVC(SWR) / RCC pipes after they are laid and tested suitable for 110mm dia bore pipe complete all as specified and as directed.

Supply only intergral liquid water proofing compound complete all as specified and directed.

Providing plain cement concrete 1:3:6 type C-1, 75mm thick using 40mm graded stone aggregate as in plinth protection/path finising the surface even and smooth without using extra cement complete all as specified and directed.

Push taps 15mm dia, cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule fixed in repairs complete all as specified and directed.

E/M Works

Point wiring complete with 1.5 sq.mm single core PVC insulated unsheathed cable 1100 volt grade, with multi stranded copper conductor conforming to IS-694 drawn through and including non-metallic rigid PVC conduit, with necessary fittings and conduit accessories surface type/ concealed run on walls /ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets , fan regulators etc., including provision of 1.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly all as specified and as directed suitable for:- (a) one light/fan point controlled by one switch complete

As per Item No 2.001 here-in-before but for 3 pin socket out let 5 Amps on independent board.

Exhaust fan 230Volts, SP, 300 mm sweep, metalic body with BEE five star rating,high speed, heavy duty complete with Louvers, clamps with screws nut and bolts, including wire connections from ceiling rose to Exhaust fan complete with all accessories including writing of MES No with Unit Name on Exhaust fans using stencil with synthetic enamel paint all as specified and as directed.

As per Item No 2.001 here-in-before but wiring complete with 2.5 sq.mm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn on independent board including provision of 2.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Note for Item No 2.001 & 2.004 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring.

Switch Piano, flush type, 5 Amps, 240 Volts single pole with ISI marked complete all as specified and as directed.

Switch socket combination 3 & 2 pin, 5 Amps, 240 volts, flush type multi purpose controlled by one switch all as specified and as directed.

Switch socket combination 2 in 1, 3 pin and 2 pin, 5 and 15 Amps flush type, universal complete all as specified and as directed

MCB single pole 240 Volts, 5 to 40 Amps complete all as specified and as directed.

Ceiling rose, surface bakelite type, 65 x 50 mm, 2 to 3 terminals all as specified and as directed.

LED tube light fittings, 20 watts, 6000K, (4 feet long), wall mounted with extruded aluminium heat sink provision, efficient heat dissipation and integrated electronic driver, industrial batten type, powder coated top cover, with bipin holders,connector block etc., complete all accessories internally pre wired all as per Havells cat No. LHEWEBP7IN1W020 or techno commercially equivalent including connecting up twin core twisted flexible copper conductor cable all as specified and directed.

MCB DB, SPN 4 ways, 240 Volts with 200 Amps rated busbar, double door for housing MCBs all as specified and as directed.

SANDIPA TRADING CO.

Shanmuga Constructions

OM CONSTRUCTIONS

K. VENKATESH NAIDU