Repair and renovation works of class room building and fabrication of student cycle stand works at thiruveeka hr sec school in ward 22

Amount

Dismantling, clearing away and carefully stacking materials Floor finish Tiles & dadooing wall Tiles with in cement mortar etc., complete.

Dismantling, clearing away and carefully stacking materials Doors and Windows including removal of frames, hingesand fastenings etc., complete.

Dismantling, clearing away and carefully stacking materials Pressed Tiles & Weathering Course etc., complete.

Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc..,complete(Rcc coloumn footing plinth beam and lintel sides etc., complete.

Supplying, erecting STEEL CENTERING for sides and soffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualar beams tee or el beams lintels , bed blocks staircase in all floors of any height (the retrived materials should be taken back by the contractor) the payment for cenetering shall be given by the concrete is laid (bottom only)

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar (1:5) 12mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) etc., complete.

Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Supply and Delivery Fabrication of MS windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. windows(1.20 m x0.90 m)

Supply and Delivery Fabrication of MS doors with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. (1.00 m x 2.10 m )

Supply and Delivery Fabrication of MS Steel Framed weldmesh grill using 32x32x6mm angle for outer frame with 25x5mm flats stiffness welded horizintally and vertically in both direction and using 3 " x 1" and 6 x10 gauge weldmesh with fly proof mesh netting etc. with necessary locking facilities and hinges including cost of red oxide primer (Weld Mesh 7.5 x 2.5cm 10 Gauge)

Manufacturing and fixing in position RCC precast slab in C.C.1:1.5:3, using 20mm HBGS machine crushed jelly of following thickness, excluding cost of reinforcement grill but including moulding, finishing, curing and fixing inposition etc. Complete

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Pointing with Cement Mortar(1:3) Slabs And Tiles to full depth of Tiles, (Marble slabs,Pressed Tiles, Ornamental tiles) -10 sqm

Fabriction supply and erection of tobulor post with Truss (100mm,80mm, 75mm The Rate shall be include the cost of tobulor post Truss members, labour charges for manufacturing and erection and Painting etc.,complete. as per departmental specification and drawings.

Supplying and fixing Roofing with Galvanised Coruugated Iron Sheet of 0.8mm thickness - 10 m2 etc., complete.

Paving the floor with design Rajasthan kotta tiles (colour and shade as directed)of size 610 mm x610 mmx 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand)20mm thick laid in-situ and pointed with same coloured cement etc., complete.

Supplying and fixing in position Cement based hydruali-cally pressed Anti-Skid tiles (pattern design)20mm thick in cement mortar 1:3-20mm thick & pointed with same colour of cement etc.,complete.as

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any airgap in the tiles neatly and fixing in position as per standard specification sand as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour lS etc in cement mortar 1:2 (one cement, two sand)over 10mm base layer plaster in and pointing with white cement neatly as directed.

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

White washing one coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed by departmental Enginners.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil)

Supply of 18W LED 3000K Square Type Recessed Fitting with LED Light of Higher End Philips / Havells / Equivalent etc., complete.

Add GST 18%

P SENTHILKUMAR (BID ID -1279221)