Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
31 Aug 2023, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aerospace Composites Division
HINDUSTAN AERONAUTICS LIMITED Aerospace Composites Division Marathahalli Post, Bangalore - 560 037
Storage OR Transport Box - Single Blade and four Blade
2574
HC/IMM/PUR3/MC3GS-1087/2/2023
IMM
Unknown (Unspecified Location)
31 Aug 2023
24 Aug 2023
24 Aug 2023
31 Aug 2023
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,
Address for correspondence:
* Mandatory Name & Address on which, The PO should be placed.
Contact details:
Contact person name
Designation
Mobile No.
Ph. No. with STD code
FAX No. with STD code
Email Id :
Unique Aadhar No (UAN).
MSE/SSI/MSME/SC/ST/Genaral (if applicable please furnish the certificate)
Registered Contractor
If Registered Contractor with HAL/ Other organisation
Registration No.
Category
GST No. * Mandatory
TIN NO.
PAN No.
Additional Note: A) Please provide duly filled ECS mandate form (Attached at Encl - 1), with sign and seal of the bank. The scanned copy of this form should uploaded along with your bid.
Aerospace Composites Division HINDUSTAN AERONAUTICS LIMITED Marathahalli Post Bangalore - 560 037 INDIA
PART II - COMMERCIAL TERMS AND CONDITIONS
Tender Ref No.: HC/IMM/PUR3/MC3GS-1087/2/2023
Name of the Vendor/ Firm:
Your Quotation Ref No.:
Nature of the contract: Supply of 02 Types of Transportation Packing Boxes as per scope of work enclosed at Annexure-I. The value quoted should be firm and fixed during the period of contract. Cost break up and Taxes/duties break up / other charges charges breakup if any to be provided separately. Price quoted should be on F.O.R. Destination basis, for delivery at HAL-ACD Stores inclusive of all charges including transit insurance, Inspection, testing & Transportation charges.
b) Tenderers should clearly mention whether the prices hold good when the full quantity of enquiry is not ordered but only a part of it. Unless otherwise mentioned, it would be assumed that the rates hold good even when lesser quantities than those enquired-of are ordered. Any increase in prices at a later date for ordering lesser quantities will not be agreed to.
Taxes : Rate of Goods and Service Tax and other taxes & duties chargeable should be clearly indicated in the offer / bid as inclusive in the price quoted or extra. If not indicated, HAL will assume that the rates quoted are inclusive of taxes.
Quantity : a) The quotation must be in the unit in which the quantity is indicated in the enquiry. If it is otherwise, conversion data must be furnished.
b) HAL reserves the right to order quantity less than indicated in the enquiry /quoted for by bidder, at the prices quoted, without any reference to the bidder.
Supply of Alternative Item : In case bidder is quoting for an alternative part, it should be confirmed that the offered part is fully interchangeable with the required part. HAL reserves the right to accept or reject the alternative items offered. Applicable descriptive literature/ catalogue if any may please be enclosed by the bidder with offer (at least two copies).
Validity of the Quotation : Price quoted should be net and unless otherwise specified should remain valid for our acceptance for a minimum of 180 days from the closing date of enquiry and the materials of offered should be kept under provisional reservation for this quotation.
Tender Due Date : Quote is to be submitted within the due date and time.
a. Any change in bid after the "Due Date & Time of Bid-Submission" of Tender is not allowed.
b. Bidders are advised, in their own interest, to ensure that their bids are submitted well before the "Due Date & Time of Bid-Submission" of the Tender. HAL shall not be responsible if bidder is not able to submit the bid on account of failure in network / internet connection at bidder's end.
Late Tender :
HAL reserves the right to reject late or incomplete offer (Not conforming to the technical and commercial requirements as per RFQ, leading to difficulty in evaluation of tenders due to insufficient information available to objectively evaluate the bid).
Tender Evaluation: a.Tender will be evaluated as per price bid Part III. All items mentioned in the RFQ will be considered in totality, quoting for only partial items will not be considered. i) In case of tenderers not agreeing for LD clause, the maximum LD amount / to the extent not agreed LD value, will be loaded in the Comparative Statement, to determine the L1 bidder. ii) In case, the bid is with Ex-works delivery without packing, 3% of quoted value shall be loaded for commercial evaluation and in case, the bid is with Ex-works delivery with packing, 1.5% of quoted value shall be loaded for commercial evaluation.
iii) In case of payment against delivery the loading factor considered for evaluation ((X/100)*Q*R/12)*0.02 (X% AGAINST DELIVERY), Q is quoted rate, R is Annual LIBOR/PLR/MCLR. iv) In case of advance payment terms,the loading factor considered for evaluation is [(Y/100)*Q*((R+2)/12)*T]*.02+((X/100)*Q*R/12)*0.02+ (%BC OR LC)/100*((X+Y)/100)*Q ; (Y% ADVANCE+ X%AGAISNT DELIVERY)% BANK CHARGES- BC; % LC CHARGES - LC; Q is quoted rate, R is Annual LIBOR/PLR/MCLR.
b. If two or more bidders quote the same price, HAL reserves the right to seek revised offer from the same bidders and placing order on revised L-1 offer. If same situation prevails then HAL reserve the right to place order on any of them.
c. Conditional discounts will not be considered in evaluation of tender.
d. Please indicate in your tender, whether stores newly manufactured are offered. Where newly manufactured stores are offered and on inspection it is found that reconditioned stores or parts have been used, such stores will be rejected at the contractor’s risk and expense.
e. Quotation should be free from correction, over-writing, using correcting fluid etc.
f. HAL is not bound to accept the lowest or any quotation and reserves the right of accepting the whole or any part of the quotation or part of the quantity offered and bidder must supply the same at the rate quoted.
g. Vendor shall not be entitled without HAL’s consent to assign or transfer to a third party all or part of the benefits or obligations under this contract.
Liquidated Damages : In the event of an order, HAL reserves the right to collect a sum of 0.5% per week or part thereof of the basic Purchase Order value of delayed portion of the purchase order, subject to a maximum of 10% of the basic value of undelivered/incomplete portion of the Purchase Order, towards liquidated damages.
Delivery : 1) Delivery schedule should be as per Scope of work enclosed at Annexure-IA & Please indicate the number of days/weeks/months required for completion of supply after intimation from Stores Dept. 2) Lead time quoted should be firm for contract period.
Earnest Money Deposit (EMD): a. An EMD amount of Rs. 75,000.00 (Indian Rupees Seventy Five Thousand only) to be submitted in any freely convertible currency of amount equivalent to the above EMD value, in form of original documents i.e. Demand Draft / Banker Cheque /Pay Order/Bank Guarantee/wire transfer drawn in favour of AEROSPACE COMPOSITES DIVISION,Hindustan Aeronautics Limited payable at Bangalore or Bank Guarantee (as per format at Annexure) is to be submitted through bank or wire transfer. EMD can also be paid through SWIFT / Wire Transfer. It may please be noted that wire transfer from one bank to another generally takes 3 to 4 days. It will be responsibility of the bidder to ensure money is credited to HAL account within the due date and time. All bank charges will be to bidders account. The details of EMD submitted via DD/PO/BC/BG/wire transfer, i.e. reference number, date and name of issuing bank along with the validity date (in case of BG, DD, etc.), & UTR no. in case of wire transfer, should be mentioned clearly in the technical bid. EMD should be submitted on or before the due date & time in a sealed cover with tender reference.
EMD should be submitted only in the specified formats as mentioned above to the following address: Chief Manager (IMM), Hindustan Aeronautics Limited, Aerospace Composites Division, Marathahalli post, Bangalore – 560 037 OR Alternatively the sealed cover with tender reference containing only the EMD should be dropped in the tender box of ACD-HAL, kept at Material / Main Gate of ARDC & ACD, on or before the tender due date and time specified in tender. HAL will not be responsible for any transit/postal delay or delay due to any other reasons in receipt of original form of EMD. b. EMD needs to be submitted by participating bidder. However, the EMD remittance document, either in Indian currency or any other convertible currency of the specified amount, can be arranged by the Indian subsidiary/branch office in India of a foreign bidder which shall be submitted along with a certificate confirming the relationship of subsidiary/branch office in the bidder’s offer. Offers not accompanied with requisite amount of EMD or EMD not submitted in the specified form or offers not having a valid certificate shall be summarily rejected.
c. Original EMD document / instruments should be submitted before the due date and time. Submission of original EMD document / instruments at later date is not acceptable. Without EMD , bid would be considered as unresponsive and rejected. d. In case EMD is submitted in the form of Bank Guarantee, the same is to be submitted in the form of Irrevocable Bank Guarantee from any Scheduled Bank or in case of foreign bidders, from Bank of international repute, directly to HAL’s bank, in the format attached. The Bank Guarantee should be valid for 28 days beyond the validity of the bid (180 days +28 days). e. The EMD will not carry any interest for the period it is retained with HAL. The EMD shall be forfeited if a Bidder withdraws, amends, impairs and/or derogates from tender within validity. f. The EMD amount will be refunded /Bank Guarantee will be returned to unsuccessful bidder(s) as per HAL guidelines. If the Original EMD Document is not received on or before the due date despite having submitted the scanned copy, the bid will be rejected in toto.
Bank Guarantee: a. BGs will not be accepted by the Divisions directly from the bidder. BGs should be sent to HAL directly by the issuing Bank . No confirmation of B.G. is required from issuing Bank, if the B .G. executed by Scheduled / Nationalized Banks is received in Banker's sealed envelope. However, in case of BG to be submitted in lieu of EMD, the original BG should be sent to HAL directly by issuing bank within the due date & time and the scanned BG should be submitted along with technical bid. b. In exceptional cases, where the BGs are received through the bidders, the issuing branch is required to immediately (within the due date and time of the tender) send by Registered Post (A.D.), an unstamped duplicate copy of the guarantee directly to HAL with a covering letter to compare with the original BGs and confirm that the same is in order. c. In order to have genuineness of the BG, the name, designation and code numbers of the Bank officer/officers signing the BGs should be incorporated under the signature(s) of the officials signing the BGs.
Force Majeure : (i) The Clearing Agent shall not be held liable for any delay in the delivery of the supplies of its performance of this services, which are subject of this Contract if such delays results from the event such as acts of god, act of war, blockades, embargo, sabotages, epidemics, revolution, strikes, lock-outs, flood, fire, major accidents, resulting in damages to the supplier, or any other event to the extent, it is beyond the Clearing Agent’s control or does not result from the Clearing Agent’s fault or negligence. (ii) The Clearing Agent shall inform M/s HAL in writing of the cause of any such delay within 14 days after such cause arises and of the necessary extensions within one month after the end of such case. The Clearing Agent shall make his best efforts to avoid or remove such causes of delay and continue performance as soon as such cause is removed.
Terms of Payment: In the event of an order, 100% payment will be made within 30 days after final acceptance at HAL, by RTGS or any other latest Electronic Payment remittance mode.
When counter terms and conditions have been offered by a tenderer, HAL shall not be deemed to be governed by such terms and conditions unless specific written acceptance thereof has been given by HAL.
Any terms & conditions which has not been the part of the bid or Purchase Order, if put forward in subsequent correspondence, shall not be considered by HAL.
BRIBES AND GIFTS: Any bribe, commission, gift or advantage given, promised or offered by or on behalf of the contractor or his parties, agent or servant or any one on his or their behalf to any officer, servant, representative or agent of HAL or any person on his or their behalf in relation to the obtaining or to the execution of this or any other contract with HAL shall in addition to any criminal liability which the contractor may incur, subject the contractor to the cancellation of this and all other contracts with HAL and also to payment of any loss or damage resulting from any such cancellation under clauses-8 and 10 thereof. Any question or dispute as to the commission of any offence under the present clause shall be settled by HAL in such manner and on such evidence or information as they may think fit and sufficient and their decision shall be final and conclusive.
CONFIDENTIALITY: The Supplier shall hold confidential technical data and information supplied by the Purchaser or on behalf of the Purchaser and shall not reproduce any such technical data or information or divulge the same to any third party without the prior written consent of the Purchaser. The Purchaser shall hold confidential technical data and information supplied by the Supplier or on behalf of the Supplier and shall not reproduce any such technical data or information or divulge the same to any third party without prior written consent of the Supplier except as far as may be necessary for either party to carry out its obligations under this Contract. In the development orders, where technical inputs/assistance is provided to the vendors, the Intellectual Proprietary Rights (IPR) will rest with HAL. Vendor will not directly deal with HAL’s customer for these items.
QUALITY & WORKMANSHIP Generally the stores shall be of the best quality and workmanship. Contractor shall comply with the contract in all respects be to the satisfaction of HAL. Where tenders are called for in accordance with ‘particulars’, the contractor’s tenders to supply in accordance with such `particulars’ shall be deemed to be an admission on his part that he has fully acquainted himself with the details thereof and no claim on his part which may arise on account of non-examination or insuffi cient examination of the ‘particulars’ will in any circumstances be considered. The contractor shall supply the stores in accordance with the ‘particulars’ unless any deviation is authorised as an exception expressly specified in the Purchase Order. The Stores/ Goods supplied shall conform to the standards, if mentioned in the Technical Specifications, or, where no applicable standard is mentioned, to the authoritative standards appropriate to the Goods’ country of origin. Such standards shall be the latest issued by the concerned institution.
EXTENSION OF TIME: If an extension is desired by the supplier, contractor shall apply for extension of time to HAL at least 15 days prior to the date of delivery without prejudice to the rights of HAL, mentioned in Clause-9, then HAL may grant extension of time for any cause which HAL may deem proper and the decision of HAL in this respect to be fi nal and binding and cannot be questioned in any manner whatsoever.
APPROPRIATION Whenever under this contract any sum of money is recoverable from any payable by the contractor, HAL shall be entitled to recover such sum by appropriating in part or whole by deducting any sum then due or which at any time thereafter may become due to the contractor in this or any other contract entered by HAL as a whole its Divisions and Branch Offices etc., held by him alone or in partnership with others. Should this sum be not sufficient to cover the full amount recoverable, the contractor shall pay to HAL on demand the remaining balance due.
ARBITRATION All disputes or differences whatsoever arising between the parties out of or relating to the construction meaning and operating or effect of this contract or the breach thereof shall be settled by arbitration in accordance with the rules of arbitration of the ICA/ICADR and the award made in pursuance thereof shall be binding on the parties.
WORK AND PAYMENT DURING ARBITRATION Work under the contract shall if reasonably possible continue by mutual agreement during the arbitration proceedings and no payment due to or payable by HAL will be withheld without reasonable cause and merely on account of the pendency of such proceedings.
JURISDICTION The Court at Bangalore, India only shall have jurisdiction to deal with and to decide any legal matter whatsoever arising out of this contract.
SUB-CONTRACT Neither of the parties of this contract shall be entitled without the other party's consent to assign or transfer to a third party all or part of the benefits or obligations of this contract.
FALL CLAUSE The price quoted shall be in no event exceed the lowest price at which you sell the stores or offer to sell stores of identical description to any person(s) / organization including the purchases by any department of the Govt. of India, the State Govt. or any statutory undertaking of the Govt. of India / State Govt., as the case may be during the period till the completion of the performance of the order placed and during currency of the order.If at any time during the said period, the contractor reduces the sales price, sells or offers to sell such stores to any person/organization including the purchaser or any department of Central Govt. or any Dept. of State Govt., or any statutory undertaking of the Central or State Govt., as the case may be at a price lower than the price chargeable under the contract, he shall forthwith notify such reduction/sale or offer to sale to the Hindustan Aeronautics Limited and the price payable under the contract for the stores supplied after the date of coming into force of such reduction or sale or offer to sale shall stand correspondingly reduced.
Agents / Agency Commission: The seller confirms and declares to the buyer that the seller is the original manufacturer or authorized distributor / stockiest of original manufacturer or Govt. Sponsored / Designated Export Agencies (applicable in case of countries where domestic laws do not permit direct export by OEMS) of the stores referred to in this offer / contract / Purchase order and has not engaged any individual or firm, whether Indian or Foreign whatsoever, to intercede, facilitate or in any way to recommend to Buyer or any of its functionaries, whether officially or unofficially, to the award of the contract / purchase order to the Seller; nor has any amount been paid, promised or intended to be paid to any such individual or firm in respect of any such intercession, facilitation or recommendation. The Seller agrees that if it is established at any time to the satisfaction of the Buyer that the present declaration is in any way incorrect or if at a later stage it is discovered by the Buyer that the Seller has engaged any such individual / firm, and paid or intended to pay any amount, gift, reward, fees, commission or consideration to such person, party, firm or institution, whether before or after the signing of this contract / purchase order, the Seller will be liable to refund that amount to the Buyer. The Seller will also be debarred from participating in any RFQ / Tender for new projects / program with Buyer for a minimum period of five years. The Buyer will also have a right to consider cancellation of the Contract / Purchase order either wholly or in part, without any entitlement or compensation to the Seller who shall in such event be liable to refund all payments made by the Buyer in terms of the Contract / Purchase order along with interest at the rate of 2% per annum above LIBOR (London Inter Bank Offer Rate) (for foreign vendors) and Base Rate of SBI (State Bank of India) plus 2% (for Indian vendors). The Buyer will also have the right to recover any such amount from any contracts / Purchase order concluded earlier with Buyer. Please submit an undertaking on your company letterhead, stating that "No agents/agency commission or Middleman in any capacity what-so-ever at any stage in connection with tender & resultant contract thereof is involved"
All correspondence between the parties, as well as all documentation, manuals, software listings and other writings, in connection with this Contract shall be in the English language.
Risk Purchase The Supplier will supply quality items as per approved sample and also the quantity intended by the concerned Division in full as per terms and conditions of respective orders. In case the Supplier fails to execute the order either in terms of quality or in quantity, HAL reserves the right to procure from elsewhere at the risk and cost of the Supplier and any extra expenditure incurred due to this purchase is payable by the Supplier.
Repeat order - Repeat order (single or multiple orders totaling to 100% value of this PO) can be placed by HAL, if required within one year of completion of all the obligations under the purchase order.
Exit Criteria: i. The contract/order may be terminated under the following circumstances: a. In the event of unsatisfactory performance by the vendor during the contract period, or any of the information provided by the supplier is found to be untrue, or supplier is found to have attempted to influence any person involved with the contract through unethical means, the contract shall be terminated with one month's advance notice without any financial implication to HAL. Notwithstanding the foregoing, in cases where it is found that a supplier is engaged in unethical practices, the same shall be barred from participating in the future contracts for a period indicated in the Purchase Manual. b. If there is change in the Customer requirement, contract shall be terminated with one month's advance notice. The liability of HAL in this case will be agreed mutually. c. The supplier is declared bankrupt or becomes insolvent. d. The delivery of material is delayed due to causes of Force Majeure by more than three months). e. Based on the decision of the Arbitration Tribunal. ii. In the event of termination of contract by either party the supplier shall ensure the following: a. IPRs are transferred to HAL to enable HAL to proceed on the work with other suppliers. Suppliers also will render all assistance till the other suppliers fully take over the balance work. b. Transfer title and deliver all or any part thereof of the supplies, materials, work-in-process, finished Products, Tooling, drawings and data produced or acquired by vendor specifically for the Product being terminated. c. Supplier shall ensure supply of products and its components / spares at least for a period of ten years from the date of such termination.
QUALITY ASSURANCE REQUIREMENTS: ================================ A) Quality System: The vendor shall establish, document, implement and maintain a Quality Management System in accordance with requirements of HAL and/or AS9100, ISO9001 or equivalent.
B) Requirements Flow down: Suppliers are responsible for compliance to all quality clauses. The supplier shall have a process for identifying and reviewing all HAL requirements, including the purchase order, all specifications and drawings, associated documents. Additionally, this includes approved sources for raw materials, processes, and requirements for delivery. The supplier shall be responsible for ensuring that appropriate requirements flow down to sub-tier suppliers.
C) Quality / Inspection System: The supplier shall maintain a quality / inspection system which is in conformance to AS9100 or ISO 9001 to include: Receiving Inspection, First Article Inspection, Manufacturing process inspection, required testing, final inspection, packing and dispatch.
D) Traceability: The supplier shall maintain a documented traceability system for the supplied items to track the details at all stages up to raw material stage.
E) Control of Non-conforming Products: Vendor shall ensure that product/services which does not conform to the requirements is identified, segregated and controlled to prevent its unintended use or delivery.
F) Corrective Action: The supplier shall perform, upon request from HAL, a corrective action investigation when discrepant material is received by HAL. A report will be submitted, within a period of five business days, which is specific and conclusive to prevent a recurrence of the discrepancy.
G) Counterfeit Parts Prevention: Supplier shall maintain a counterfeit parts / material prevention and control plan to ensure that counterfeit parts and materials are not delivered to HAL. Supplier shall give written communication to HAL-ACD if supplier becomes aware or suspects that it has supplied counterfeit parts within 24 hours. Any counterfeit or suspect counterfeit parts/ material delivered to HAL will be controlled by HAL to prevent re-entry into the supply chain. The counterfeit or suspect counterfeit parts / materials must be replaced with non-counterfeit parts. Supplier shall include this clause or equivalent provisions in lower tier supply chain for the parts / materials supplied to HAL.
H) Source Inspection: Acceptance of supplied parts / material is subject to inspection at HAL. Supply not conforming to the ordered specification will be rejected and information will be communicated.
I) Shipping, handling and storage: The supplier shall provide packing that maintains the quality of the product and prevents damage, deterioration or loss while in transit or while in long term storage.
J) Records retention: The supplier shall maintain records for a period of minimum of 15 years that provide objective evidence of compliance to the purchase order requirements and / or specifications. The records must be legible and must be retrievable within 48 hours of a request.
K) Our organization reserves the right of access by our representatives, our customers and any regulatory authorities to the applicable areas of the facilities, at any level of the supply chain, involved in the order and to all applicable records.
L) Our Organization reserves the right to require and request evidence for ensuring that vendor's personnel are aware of - Their contribution to product or service conformity; - Their contribution to product safety; - The importance of ethical behaviour.
HINDUSTAN AERONAUTICS LIMITED Aerospace Composites Division Marathahalli Post Bangalore - 560 037 INDIA
Part III - PRICE BID
Tender Ref No.: HC/IMM/PUR3/MC3GS-1087/2/2023
Name of the Vendor/ Firm:
Your Quotation Ref No.:
General Instructions: 1. The price bid should be complete in all respects and inline with the format given below. 2. Bidder has to quote compulsorily for all the prices below. 3. The sum total of all prices at ( Total Cost Q= (A1+A2) will be basis of evaluation.
Grand total Amount in Rs. (Q = A1+A2)
Other charges & taxes ., if any
Tax Details (Mandatory)
Applicable GST Taxes in Percentage (%) and other details
GST No
Any other comments
Name of Authorised signatory and Seal
Note:The evaluation will be based on Grand total amount "Q" and L1 will be arrived accordingly.
Aerospace Composites Division HINDUSTAN AERONAUTICS LIMITED Marathahalli Post Bangalore - 560 037. INDIA
Scope of work -Part 1
Tender Ref No.: HC/IMM/PUR3/MC3GS-1087/2/2023
Name of the Vendor/ Firm:
Quotation Ref. No.:
STORAGE/TRANSPORTATION BOX FOR ALH MRB – SINGLE BLADE Drg No: 201S 621H 2000 003 "F" / 005 "F" Tool Drawing No. DHT- 4142 ' A ' Qty: 80 Nos
STORAGE/TRANSPORTATION BOX- FOUR BLADES Drg No: 201S 621H 2000 001 / 201W 621H 2000 001 Tool Drawings No. DHT-4143 ' A ' Qty: 30 Nos
a) (40 No’s ARE TO BE DELIVERED YEAR 2023-2024 (AS AND WHEN REQUIRED).
b) (40 No’s ARE TO BE DELIVERED YEAR 2024-2025 (AS AND WHEN REQUIRED)
NOTE:- VENDOR HAS TO SUPPLY ONE(QTY-1NO) OF STORAGE/TRANSPORTATION BOX DHT-4142 ‘A’ WITHIN ONE WEEK FOR FIRST OFF PROVING AND REMAINING QTY AS STATED ABOVE BASED ON ACCEPTANCE OF FIRST ONE.
Refer notes in the drawing before fabrication of storage/transportation box for MRB
Arrange and cut all required raw materials mentioned in the bill of material to fabricate storage/transportation boxes as per drawing.
Assemble the item No. 1 to 20 and item no 41 by using commercial items (item no 44 to 51) and maintain the dimensions as per drg.
Fabricate contour blocks (item nos 31 to 38) by using lofts supplied by the HAL.
Assemble the item No 21 to 29 by using nails and maintain the dimensions as per drg.
Assemble the item nos 42 and 43 as per drg.
All joints to be glued, screwed, nailed properly as per standard practice and leak proof for sea water and rain water.
All joints to be glued, screwed, nailed properly as per standard practice and leak proof for sea water and rain water.
Cover inside the box with a layer of TAR sheet and above that with a layer of polythene sheet.
Apply NAPTHA all over before painting.
Paint the box with a grey colour over coat of primer.
Attach metal tag as per the note no: 5 as per drawing.
NOTE: 1) 40 No’s ARE TO BE DELIVERED YEAR 2023-2024 (AS AND WHEN REQUIRED).
2) 40 No’s ARE TO BE DELIVERED YEAR 2024-2025 (AS AND WHEN REQUIRED)
Finished storage boxes as per drawing DHT-4142 ‘A’.
Hard & soft copy of Inspection report for the finished storage/transportation box.
2D tool drawings and lofts supplied by HAL.
The raw materials required for fabrication of the storage and transportation boxes are to be arranged by the vendor and HAL will not supply any material
Strict adherence to drawing dimensions is necessary.
Strict adherence to delivery schedule is essential.
The storage and transportation boxes are acceptable subject to HAL inspection/user department.
The storage and transportation boxes after fabrication should be delivered to Receiving Stores, Aerospace Composite Division, Marathahalli Post, Bangalore-37.
Any rework if required to be carried out by the vendor free of cost.
Clarification if any required to be obtained from HAL.
No gauges or jigs or fixtures will be supplied by HAL to manufacture the above tools.
The raw materials used for manufacturing of these tools are to be IS standard or equivalent.
TOOL NO-DHT-4142 ‘A’
CHECK THE LINEAR DIMENISIONS AS PER THE TOOL DRAWING USING MEASUREING TAPE
CHECK THE CONTOUR FEATURE OF THE ITEMS USING THE GIVEN VELLUM
IDENTIFICATION TO BE DONE AS PER THE DRAWING
NAPTHA COATING TO BE DONE BEFORE PAINTING
DESICCANT BAGS TO BE PROVIDED FOR EACH BOX
b)(15 No’s ARE TO BE DELIVERED YEAR 2024-2025 (AS AND WHEN REQUIRED)
a. 2D Tool drawing.
b. Lofts.
Arrange and cut all required raw materials mentioned in the bill of material to fabricate storage/transportation boxes as per drawing.
Assemble the item nos 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20 item no 41 by using commercial items (item nos 44 to 51) and maintain the dimensions as per drg.
Fabricate contour blocks (item nos 31 to 38) by using lofts supplied by the HAL.
Vendor can use Plywood with felt in place of PU foam.
Assemble the item nos 21,22,23,24,25,26,27,28,29 by using nails and maintain the dimensions as per drg.
Assemble the item nos 42 and 43 as per drg.
All joints to be glued, screwed/nailed properly as per standard practice and leak proof for sea water and rain water.
Cover inside the box with a layer of TAR sheet and above that with a layer of polythene sheet.
Apply NAPTHA all over before painting.
Paint the box with a machine grey colour over coat of primer.
Attach metal tag as per the note no: 5 as per drawing.
Finished storage boxes as per drawing DHT-4143 ‘A’.
Hard copy of Inspection report for the finished storage/transportation box.
2D tool drawings and lofts supplied by HAL.
The raw materials required for fabrication of the storage and transportation boxes are to be arranged by the vendor and HAL will not supply any material
Strict adherence to drawing dimensions is necessary.
Strict adherence to delivery schedule is essential.
The storage and transportation boxes are acceptable subject to HAL inspection/user department.
The storage and transportation boxes after fabrication should be delivered to Receiving Stores, Aerospace Composite Division, Marathahalli Post, Bangalore-37.
Any rework if required to be carried out by the vendor free of cost.
Clarification if any required to be obtained from HAL.
No gauges or jigs or fixtures will be supplied by HAL to manufacture the above tools.
The raw materials used for manufacturing of these tools to be are IS standard or equivalent.
TOOL NO-DHT-4143 ‘A’
CHECK THE LINEAR DIMENISIONS AS PER THE TOOL DRAWING USING MEASUREING TAPE
CHECK THE CONTOUR FEATURE OF THE ITEMS USING THE GIVEN VELLUM
IDENTIFICATION TO BE DONE AS PER THE DRAWING
NAPTHA COATING TO BE DONE BEFORE PAINTING
DESICCANT BAGS TO BE PROVIDED FOR EACH BOX
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
DWGsforBoxes.pdf
TENDER_DOCUMENT • 6.92 MB
ECSMandate.pdf
TENDER_DOCUMENT • 0.01 MB
FormatofBankGuaranteetowardsEarnestMoney.pdf
TENDER_DOCUMENT • 0.02 MB
MC3GS1087Coveringletter.pdf
TENDER_DOCUMENT • 0.06 MB
MC3GS1087GeneralInfo.xls
TENDER_DOCUMENT • 0.18 MB
MC3GS1087PartIICommercialTermsnew.xls
TENDER_DOCUMENT • 0.07 MB
MC3GS1087PartIIIPriceBid.xls
TENDER_DOCUMENT • 0.03 MB
MC3GS1087PartITechnicalbid.xls
TENDER_DOCUMENT • 0.05 MB
OtherDocuments.pdf
TENDER_DOCUMENT • 1.09 MB
VendorRegistration.pdf
TENDER_DOCUMENT • 0.48 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .