Construction of boundary wall at CT HG CD Kote Bhalwal Jammu

Amount

Earth work in excavation in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus be excavated soil within a lead of 50M from edge of cutting . disposed earth is to leveled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) including all carriages and cost of material involved.

Providing and laying in position cement concrete of specified grade excluding C/o centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 course sand : 6 stone agg. using 20mm nominal size) including curing complete including all carriages and cost of materials involved.

Providing and fixing up to floor five level c. Conc. Hollow blocks incl. Hosting and setting in position with 1:3 cement mix cost of required centering shuttering and finishing smooth with 6mm thick plaster in 1;3 mix on exposed surface complete in M-10 G using 20mm and below aggs. Including all carriage and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for foundation footings, bases of columns etc. for mass concrete.

Providing and fixing ‘Y’ shaped angle iron over the boundary wall by embedding in concrete block of size 30x30x45 cm of mix 1:2:4 and by using of M S angle (50x50x6) of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes up to 10 mm dia. etc complete including costs and carriages of all materials involved

Supplying, straining and fixing galvanized steel barbed wire (Type –A size 5 IS: 278-1978) mass per metre: 97g min) to post with GI binding wire tied to bar-nibs/ clips/ staples/ cutting of angle iron posts/ making holes length of the wire to be measured. Including all carriages and cost of materials involved.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats . including applying priming coat of approved brand and manufacture on steel work.

Nazir Hussain

MOHD AMIN SEH

Deepak Singh

Anil Gandotra

Chand Kumar Bhat

NIRMAL SINGH

PAWAN KUMAR

M/S DESIGN INFRATECH