8890/E8

Amount

S&F galvanised iron snap grid frame work made from galvanised iron main /cross tee of size 38 mm x 24 mm x 0.32 mm weighing 0.28Kg/RM and 28 mm x 24 mm x 0.30 mm weighing 0.22 Kg/RM respectively for false ceiling of grid size 600 mm x 600 mm including necessary hanging arrangement comprising of 4 mm dia MS rod, 'J' bolts with necessary bolts, nuts and washer all as per manufacturer's instruction complete all as specified and as directed. The snap grid (main & cross section) shall supported at ends all along the wall with galvanised iron angle of size 22 mm x 22 mm x 0.40 mm weighing 0.15 Kg/RM complete as per manufacturer's instruction and as specified and directed. (Bhutan Board, Gypboard Anchorla, Anchor ceiling Tiles, Duratuff, Armstrong, Everest)

M&L for providing pre painted fiber cement board 6mm thick in ceiling fixed on GI snap grid as per manufacturer's instruction complete all as specified and as directed. (Bhutan Board, Gypboard Anchorla, Anchor ceiling Tiles, Duratuff, Armstrong, Everest)

M&L point wiring concealed type with 1.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable 1100 Volts grade drawn through with and including PVC conduit with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core FRLS copper cable as earth continuity wire connecting to common earth point including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC / Plastic laminated sheet. top cover, suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc complete for light point controlled by one way switches complete all as specified and directed. Note: Wiring wire color code i.e. Red/ Yellow /Blue for Phase, black for neutral and Green for earth shall be maintained.

M&L for LED recessed full open 2 ft x 2 ft tile, glare free uniform illumination with longer life and less maintenance, 24 W with minimum lumen capacity 100 lum/W complete all as specified and directed.Make : Crompton Greaves /Philips/Havells /Bajaj.

S & F switch piano, flush type, 5/6 Amps, 240 Volts, single pole, one way, conforming to IS complete all as specified and as directed.

S & F modular switch 6 Amps, 240 Volts, single pole, one way, single module conforming to IS complete all as specified and as directed.(Make-Legrand/ CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white cover plate with frame for Modular switch, 4 module complete all as specified and as directed. (Make-Legrand / CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white cover plate with frame for Modular switch, 6 module complete all as specified and as directed. (Make-Legrand / CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F Modular metal flush box, 4 module complete all as specified and as directed. (Make-Legrand 6890 09 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F Modular metal flush box, 6 module complete all as specified and as directed. (Make-Legrand 6890 10 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills, sunshades, shelves, lintels etc. in brick walls and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc. 20 cm girth complete all as specified & directed. (Note:- Disturbed surfaces of wall shall be make good by applying two coats of OBD over a coat of wall care putty over cement mortar plaster (1:3) where necessary to match with existing surface finish).

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills, sunshades, shelves, lintels etc. in brick walls and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth complete all as specified & directed. (Note:- Disturbed surfaces of wall shall be make good by applying two coats of OBD over a coat of wall care putty over cement mortar plaster (1:3) where necessary to match with existing surface finish).

SINHA ENTERPRISE

MS JYOTI INDUSTRIES

M/s Santosh Industrial Corporation

UJJAL ELECTRIC

R.K.TRADING CO. INDIA

JOY-EN-JOY

CHOWDHURY SMALL INDUSTRIES

M A ENTERPRISES