PROVN OF FENCING AND GATES AND ALLIED WORKS FOR 22KV VCB AT KHULEWADI AREA AT AFS PUNE UNDER GE AF LOHEGAON

Excavation in post holes (or similar holes) each n exc 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft rock complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (40 mm graded aggregate ) in foundations, filling and mass concrete for post holes complete all as specified and directed.

S&F mild steel work in post & struts, angles in fencing including cutting tips to shape as directed. drilling holes. notching for wire etc. including flat iron fillets for securing wire mesh etc including all necessary drilling bolting or riveting of and similar work conforming Fe-290 Gde E-165

M&L for rolled steel mild steel Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections conforming to Fe 410-W (Gde- E- 250) quality- A) complete all as specified and directed.

S&F for mild steel screw bolts (machine cut) with hexagonal or square heads at one end and srewed the other or screwed both ends each screwed end to be fitted wth washers and one hexagonal or square not exceeding 5 cm long and diameter of neck 5 to 10mm complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type fixed to post struts or steel members complete all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire all as specified and directed.

S&F Mild steel framed work as in gates ,doors , grills, gratings. gate etc with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars. barred iron doors of angle or other section with gasset plates. rails, complete drilled for fixing of steel sheeting or other covering. Door/gate to be prepared for hanging or sliding including steel sheeting and fittings etc complete. and similar work confirming to Fe 290 Gde E-165.

M&L for Preparation of new or previously untreated surface and applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces all as specified and directed.

Excavation in trenches n exc 1.5m deep and n exc 1.5m wide foundation etc getting out in hard/rock complete all as directed.

Removal of rocks to distance n exc, 50m and depositing where directed at a level n exc 1.50m above the starting point complete as directed.

S&F Punched tape concertina coil of 600 mm dia, 56 loops, 2.5 mm core wire, heavy galvanised (wire-275 GSM), tensile strength of wire 1450- 1500 N/Sqmm, (weight 15.20 Kg/Coil +/- 5%), stretchable length 15 m including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed.

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

Surface dressing n exc 15 cm deep in hard dense soil complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard dense soil complete all as specofied and directed.

M&L for hardcore of gauge n.exc 0.63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface of a broken stone or boulders complete all as specified and directed.

M&L for 75mm thick PCC type D-2 (1:4:8) using 40mm graded agg as in flooring in sub floor complete all as specified and directed .

M&L for 100mm thick PCC type B-1 (1:2:4) using 20mm graded agg as in flooring finished even and fair complete all as directed.

M& L for sand filling under for laying paver block.

M&L for machine pressed precast concrete interlocking paver block 60 mm thick rubber molded any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment over sand complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Please Enable Macros to View BoQ information