REPAIR AND MAINT OF FLOORING, HARDSTANDING, PATH, PLINTH PAVEMENTS, TOILETS BATHROOMS, SANITARY ITEMS AND MISC B/R WORKS AT CHCC AND OTHER AREA OF AGE E/M HOSP UNDER GE E/M LUCKNOW.

Amount

Taking down chowkhat with shutter without taking off shutter from frame n.exc 1.5 sqm each complete all as specified & directed.

Taking down shutter only exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified & directed.

Taking down shutter only n. exc 1.0 sqm each complete all as specified & directed.

Taking down chowkhat with shutter exc 1.5 sqm but n.exc 4 sqm each and removing from site complete all as specified & directed.

S&F 2nd class Hard wood in plain, solid, straight chowkhats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified.

S&F bands, straps, clamps, hold fasts; wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified & directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications & drawing complete as directed by Engineer-In-Charge.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS, supplying and fixing in frame at site as per specification and drawings shown in section 8 of SSR part -II complete all as directed.

M&L 30mm thick 2nd class hard wood glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified.

M&L 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified & directed.

S&F 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified & directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified & directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified & directed.

S&F 150mm size Aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified.

S&F 100mm size Aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified.

S&F Aluminium alloy, anodized, sliding door bolt (ISI marked) of 300mm with hasp & staple (Bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed.

M&L preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified & directed.

S&F 2nd class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to Store complete all as specified & directed.

S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & directed.

S&F in repair aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & directed.

Hacking out old broken glass panes of any thickness, size, quality or description from wooden frames , glazed with putty or fixed with beads in repairs.

S&F glass pane ordinary quality 3mm thick and glazing with oil putty/ wooden beads in square n. exc 0.5 m each pane complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15 cm thick (above or below ground level) compelte all as specified and directed.

M&L 75mm th PCC 1:3:6 type C-2 as in sub base, paving, plinth protection, finished even and fair complete all as specified and directed.

M&L non-skid coloured ceramic tiles 300 x 300 x 7 mm in flooring, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick screed in CM 1:3 complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M&L for 30mm thick PCC 1:2:4 type B-0 using (12.5mm graded stone aggregate ) as in sunken floor mixed water proofing compound finished surface even and smooth with using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured separately.

M & L rendering 15mm thick cement plaster in cement mortar 1:3 as in brick /concrete surface of sunken portion using water proofing compound complete all as specified and directed. Note : water proofing compound shall be measured & paid seperatly

M & L wire brushing and cleaning top surface of cement concrete including flashings and junction of parapet etc. and surface painting with a layers of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m. blinded with grit or pea size gravel @ 0.006 cu.m. per sqm and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and directed.

M & L Cement concrete 1:5:10 type E2 using 40mm graded stone concrete as in sunken floor, foundations, filling and mass-concrete finished surface fair and even complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

All as per item no 34 above but on ceiling surfaces.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 10mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 10mm thick on ceiling in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and directed.

M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.

Taking up or down steel water tubing 15 mm bore and connections of following descriptions :-

All as per item No 41 above but 20 mm bore

Mild steel galvanized steel tubing medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floors complete of following descriptions :-

All as per item No 43 above but 20 mm bore

All as per the description of above item here in before but re-fixing old steel tubing of 15 mm bore descriptions:-

All as per item No 45 above but 20 mm bore

S & F 20mm dia unplasticised PVC pipes of pressure rating 10 kgf /cm2 with all fittings and fixed complete to walls and ceilings or laid in floors including taking down of pipe complete all as specified & directed.

S & F 15mm dia unplasticised PVC pipes of pressure rating 10 kgf / cm2 with all fittings and fixed complete to walls and ceilings or laid in floors including taking down of pipe complete all as specified & directed.

S & F in repair 15 mm dia bib tap cast copper alloy (fancy type), chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed.

S & F in repairs stop valve, cast copper alloy, fancy type, chromium plated screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed.

S & F in repair brass chromium plated shower rose 125mm size with swivel joints, suitable for 15mm dia GI pipe complete all as specified & directed.

S & F in repairs vitreous china water closet (squat pan) orrisa pattern 580x440 mm white, with front or back inlet with integral foot rests including connections to trap, and to flushing pipe, antisyphonage pipe, etc (excluding flushing cistern and flush pipe) complete including making good to floor all as specified and directed.

S & F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as specified & directed.

S & F CI 'P' or 'S' trap of 100mm size complete all as specified & directed.

S & F in repairs vitreous china urinals, flat back of size 465mm X 355mm X 265mm, white with grating and union for discharge pipe complete all as specified and directed.

S & F in repair vitreous china, white, wash hand basin, flat back size 550 x 400 mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe complete all as specified and directed.

S & F 32mm dia waste pipe of polythelene, flexible, for wash hand basin or urinals complete all as specified and directed.

S & F waste coupling of PTMT (half or full threaded) for 32/40mm dia complete all as specified and directed.

S & F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed.

S & F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed.

All as per Item No. 60 above but fixed to walls

S & F 110mm bore PVC (SWR) bends any radius complete all as specified & directed.

All as per Item No. 62 above but with access door.

S & F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed.

All as per Item No. 64 above but fixed to walls

S & F 75mm bore PVC (SWR) bends any radius complete all as specified & directed.

All as per Item No. 66 above but with access door

M/L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed.

S & F stack clamps made out from 50x5mm size flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to walls or roof for 100mm bore of pipe etc complete all as specified and directed.

Taking down cement plaster brick/stone wall, ceiling / facia (as in patch work) etc including racking out joint, hacking for key, scrubbing down with water complete including M & L for rendering plaster 10mm thick in cement mortar 1:3 on concrete surface of wall/ceiling / facia including one bonding coat with pedilite chemical and making good to match the adjacent surface all as specified and directed.

Dismantling PVC water tanks exc 250 ltr but n. exc 500 ltr capacity and removing to store complete all as specified & directed.

Dismantling PVC water tanks exc 500 ltr but n. exc 1000 ltr capacity and removing to store complete all as specified & directed.

S & F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed.

S & F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed.

S & F 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC OHT tanks all as directed.

S & F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube complete all as specified & directed.

M & L Plain Cement concrete Type B-0, 1:2:4 (12.50mm graded aggregate), 25 mm thick as in sub-base of floors complete all as specified & directed.

M & L 18-20mm thick machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and complete and 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L 18-20mm thick machine cut kota stone slab as in skirting/riser over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and complete and 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed by Engineer -in-Charge

M & L for brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6.0 m mean radius built in cement sand mortar 1:6 complete all as specified and as directed by Engineer -in-Charge

M & L for Non skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour complete all as specified and as directed by Engineer -in-Charge.

M & L for providing precast cement concrete with type B0 PCC 1:2:4 (using 12.5 mm graded stone aggregate) set in CM 1:4 louvres and jallies, 35 mm thick (measured solid), including all mouldings but excluding frame complete all as specified and as directed by Engineer -in-Charge.

M & L for RCC M-25 Nominal Mix using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floor, roof, landing etc complete all as specified & directed.

M & L Formwork to soffits of suspended slabs such as roof slabs floor slabs, landing and similar work for fair finished surface complete all as specified and directed.

M & L for form work to edges of concrete flats, treads, break in floors, window cills, horizontal or sloping and similar exc 10cm but not exceeding 20 cm wide for fair finished surface complete all as specified and directed.

S & F mild steel TMT bars 8mm dia and over, cut to length , bent to shape required, including cranking , bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L 18-20 mm thick granite stone slab ( Black colour) , bedded over screed bed and jointed in cement mortar to match the colour of slab as in flooring , polishing and grinding complete all as specified.( Screeding bed shall be measured and paid separately complete all as specified & directed.

S & F 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed.

S & F in repair CP Angle stop cock ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for all forming branch channel (1/2) round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching complete all as specified & directed.

M & L for concrete bed for 150 mm bore pipe in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M & L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed.

S & F vitreous china Europeon Water Closet (one piece) of specified make with flushing cistern & white seat cover complete all as specified & directed.

S & F in repair CP angle cock (two way) complete all as specified.

S & F health faucet CP with 15 mm dia. complete all as specified & directed.

S & F white toilet paper holder of vitreous china (specified make) fixed to walls with chromium plated (CP) brass screws complete all as specified.

S & F in repairs pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified & directed.

S & F in repair CP Angle stop cock ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified.

M & L for PCC 1:5:10 type D2 (using 40 mm graded stone agrregate) as in foundations, filling & mass concrete etc all as specified and directed.

M & L for PCC 1:2:4 type D2 (using 20 mm graded stone agrregate) as in foundation, filling & mass concrete, for hard standing etc all as specified and directed.

M & L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection and the like all as specified and directed.

M & L for filling joints between two panels with mix of 85/25 bitumen and sand in 1:3 complete all as specified & directed.

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in cement mortar complete all as specified & directed.

M & L 60 mm thick PCC intrelocking tiles (rubber laminated finish ) of size and shape as approved , laid dry on sand not less than 40 mm thick, interstices filled in floors/ pathway complete all as specified.( Sand cushion shall not be measured and paid seperately.)

M & L 60 mm thick PCC intrelocking tiles of size and shape as approved , laid dry on sand not less than 40 mm thick, interstices filled in floors/ pathway complete all as specified.( Sand cushion shall not be measured and paid seperatelly.)

M & L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping,padding and bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified & directed.

M & L chequered cement concrete coloured tiles 20 cm x 20cm x 20 mm thick with coloured cement and no pigment , set, jointed and pointed in neat cement slurry over 20mm thick screed bed in CM 1:4 as in floors complete all as specified.( (Note : Screed bed will not be measured and paid separately)

M & L for non skid ceramic (coloured) tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 15mm thick screed CM1:6 (Note : Screed bed will not be measured and paid separately)

M & L for non skid ceramic (coloured) tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 15mm thick screed CM1:6 (Note : Screed bed will not be measured and paid separately)

M & L vitrified ceramic tiles (Dark Shade) 10mm thick (square /rectangular) coloured polished tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over 15 mm thick screeding CM 1:6 (Note : Screed bed will not be measured and paid separately)

M & L coloured / designed as approved wall tiles (exterior grade) 8 to 10 mm thick area of each tile exc 0.09 sqm but n.exc 0.25 sq m in vertical /horizontal surface set and jointed in neat cement slurry and pointed in white/colured cement and pigment to match over 15 mm complete all as specified & directed.

M & L for glazed ceramic tiles in vertical surfaces 300 x 200 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick screed in CM 1:3 (Note : Screed bed will not be measured and paid separately)

M/s J C Oberoi

M K Engineers and Contractors

M/S UJJAL ASSOCIATES

Ajay Traders

M/S Reliance Construction

M/S AMARJIT SINGH