RENOVATION OF MATERIAL TECHNOLOGY DIRECTORATE IN OLD BUILDING AT ADA CAMPUS II BANGALORE

Dismantling of existing 75mm/100mm thick aluminum partition and door including all necessary hardware, complete all as per sample available at ADA.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials away from the site.

Servicing of existing window & Ventilator Scope includes removal of existing fixed glasses and cleaning the frames with proper procedure and removal of existing window openable frames by gas cutting and grinding the sharp surfaces (if available). And refixing with black tinted glasses with proper procedure using metal paste and etc at ventilator places.

Dismantling of flushing cistern of all types (C.I./PVC/ Vitreous China) including disposal of unserviceable materials away from the site. Complete as per ADA instructions.

Dismantling tile work in floors and roofs laid in cement mortar and including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead: 75 to 80 mm dia pipe. complete as per ADA instructions.

Removal of MS sliding collapsible gate and shifting to ADA campus I. Scope includes dismantling/removal of sliding MS gate of apprx size 2.5 x 3 mt properly without damaging the adjacent structures

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by manual or mechanical means, including loading, transporting, unloading away from the site or as approved by Engineer-in-charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure in all shapes and sizes in with Cement mortar 1:4 (1 cement : 4 coarse sand). The rate is inclusive of cost of transportation, labour for shifting, necessary tools & machineries etc., with all leads and lifts and as directed by Engineer in charge.

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. (External plastering )

Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal.

Providing and fixing of White Vitreous China Wash basin size 550x400 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require etc complete as per ADA instructions.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern &C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern WC Pan of size 580x440 mm

Supplying toilet cubicles of standard dimension which includes 600mm door size width made of heat, bacteria, water chemical, scratch and impact resistant 12mm thick solid compact laminate panels including doors, pilasters and intermediate panels finished with approved texture / shade as per the detail. This includes all providing and fixing in necessary hardware made out of aluminum& SS 304 grade with aluminum supporting systems 1. Door knob (2) Gravity hinges (3) Latch lock indicators (4) Top rail (5) Coat Hook, (6) U-channel (7) Door Stopper channel (8) SS adjustable foot (10) Screws & wall plugs etc. The adjustable foot supports the pilaster and its based is anchored to the floor with stainless steel & nylon plug fixed in to ground there U-channel are used to attached the divider panels to the wall. Toilet cubicle with standard dimension Front 12mm thick with 2145mm ht x 1000mm Width (Door Size 600mmx1830mm), Partition 12 mm thick 1550mm depth x 1980mm Ht (including gap of 150mm) which includes 600mm door size width.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls * 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. * 50mm nominal dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. * 100 mm nominal dia pipes

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement of Ordinary cement finish using ordinary cement.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 of 15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 of 15mm nominal bore.

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.

Providing and fixing 100 mm sand cast Iron grating for gully trap.

P/F PVC Multi trap (floor trap ) of approved quality and make and confirming to ISI specifications including construction of CC : 1:2:4 as directed by Engineer-in - charge

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing mirror of superior glass (of approved quality) andof required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing of rectangular shape 1500x450 mm.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour of 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete of Size of Tile 600x600 mm (dadoing same as rough plastering ).

Providing and fixing of 850mm (W) x 2100mm(H) - single leaf Flush Door shutter (32mm thick waterproof Block Board) with frame, solid panel PVC door shutter of single piece extruded profile decorative finished (wood grain finished). The rate should be inclusive of all hardware complete including locks, handle door closer, transportation, labour etc. complete all as per ADA instructions. Make: Deccan Structure / Madhu industries

Providing and laying linoleum/vinyl/PVC plain flooring or colored 3.2mm thick sheet/tiles laid with an approved adhesive on sub floor sketching, cutting and fixing. Complete. Including cost of materials, labour, complete as per specifications.

Providing and fixing carpet tiles conference room 450x450x5 mm thick with 800+ gsm with stain proof property, flexible and super absorbent fibre of good quality as per the direction of Eng I/C. Including cost of materials, labour, complete as per specifications. Scope also includes removal of existing layer and cleaning the surface (Stair case)

Providing & rendering OBD of lighter shade on wall /ceiling over a coat of wall primer of approved make, two are more coat to get even and neat finish, incl touch up putty, roller finish etc. complete all as per sample available at ADA and OEMs specification.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing, fabrication and installation of Vista or Finesta or Hunter Douglus make Manual Roller Blinds Translucent lighter shade fabric with incl accessories, all as per OEM specification, etc complete, including supplying & fixing of frames or any supporting member to fix the blinds wherever required. including surface preparation, cleaning the glass, transport and labour cost etc to get neat and attractive finish.

LACQUERED GLASS WORK Providing and fixing in position 12mm toughened lacquered glass (color-White) for columns. The work to include making necessary template for all the glasses and then cutting the glass to correct size, making all the necessary holes, cuts etc., and then toughening the same. The cost to include all hardware required viz., single corner patch, bracket etc., The approximate size of each glass will be 2'x7'subject to site conditions. The rate is for a finished item of work etc., complete as directed.

Providing, fabricating & Installation of Full height Aluminum Partition including doors. All the Vertical & Horizontal members shall be powder coated AL Sections of size 65 x 40 x 1.2 mm heavy gauge forming a grid as per drawing enclosed. The partition shall be rigidly fixed to wall / Ceiling / floor, etc for stability, the filler material shall be 05 mm thick clear glass or pin head glass fixed using AL snap fit clips, rubber gaskets. etc complete as per samples available at ADA.

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in Charge. With 15 mm thick tegular/butt edged without perforation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21

Providing and fixing factory-made Aluminum Sliding windows with all accessories like handles, hinges, sliding track etc complete. Three track three panels sliding windows with two galzed & one wire mesh panels with aluminum channel for roller track, wool pile, nylon rollers with SS304 body. Using R3 series with frame (98mm & above) x (40mm&above) & both glazed and fly screen sash (30mm & above) x (55 mm & above) with zinc alloy (Zamak) powder coated handle on very glazed panel along with multi-point locking system. (Height upto 1.8 mt)

Providing and fixing Full Solid Height Partition. Partition in 2"x2" Aluminium frame work at 2'-0" center to center upto the Existing Ceiling height. The frame work both sides to be covered with 12mm thk BWR plywood upto the false ceiling, finished with 4mm thk veneer and/or 1mm thk laminate with necessary inlays and grooves as per drawing. Partition at floor level to be fixed with 4" high skirting, made of 12mm thk BWR plywood finished with 1mm thk laminate and edges covered with approved wood beading. All veneer and beading surface to be finished with melamine polish as instructed by architects. All as per drawings and/or instructions of the architect. All materials to be approved by the architects. • both side Laminate

Providing and applying fiber reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 liter/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

Supply, Installation & Commissioning of 2x2 feet LED Fittings for False Ceiling 36watt, Cool White light (6500k) & up to 4kv surge protection including 3 core PVC insulating Copper flexible wire connection on existing light point etc., with all respects Make Wipro/Philips/Crompton

Supply, Installation & Commissioning of 1x1 feet LED Fittings for True Ceiling 20watt, Cool White light (6500k) & up to 4kv surge protection including 3 core PVC insulating Copper flexible wire connection on existing light point etc., with all respects Make Wipro/Philips/Crompton

Supply, Installation & Commissioning of 9watt LED spot light False Ceiling, Cool White light (6500k) cut-out 3 inch & up to 4kv surge protection including 3 core PVC insulating Copper flexible wire connection on existing light point etc., with all respects Make Wipro/Philips/Crompton

Supply, Installation & Testing of Cassette Air- Conditioning Units with 3-star rating & 2 ton of refrigeration with accessories like indoor, outdoor unit along with installation kit, top-up of refrigerant gas R410/407C, WATER drain pipe & lay of copper pipe between indoor and outdoor unit with all respects (for 1st Floor) Make-LG, Carrier, Blue Star, Voltas Detailed specification of 2 TR Cassette type • Nominal Cooling Capacity: 6000 Watts=20000 BTU/Hr • Energy Efficiency: 3 or above energy rating • Technology: Invertor technology • Air Flow: 360° air distribution/Auto air swing • Filters: HD, Anti-bacterial & Washable filter • Noise level: 35-40 db • Compressor type: Rotary or Scroll • Convenience feature: Remote control/Auto start • Dimension & design: 840x840x270mm • Warranty: 1 year Comprehensive warranty 5 year Compressor warranty

Supply of Suction & Discharge pipe size 1/2 ’’ Copper for Sunction & ¼ ‘’ for discharge to inter connect indoor & outdoor with necessary Vidoflex insulation.

Supply, Installation & Testing of Split Air- Conditioning Units with 3 star rating & 1.5 ton of refrigeration with accessories like indoor, outdoor unit along with installation kit, top-up of refrigerant gas R410/407C, WATER drain pipe & lay of copper pipe between indoor and outdoor unit with all respects (for 1st Floor) Make-LG, Carrier, Blue Star, Voltas Detailed specification of 1.5 TR Cassette type Nominal Cooling Capacity: 5350 Watts=18500 BTU/Hr Energy Efficiency: 3 or above energy rating Technology: Invertor technology Air Flow: Multi directional air flow Filters: HD & Washable filter Noise level: 35-40 db Compressor type: Rotary or Scroll Convenience feature: Remote control/Auto start Dimension & design: 850-950mm length Warranty: 1 year Comprehensive warranty 5 year Compressor warranty

Supply and fixing of 1’’dia PVC rigid Pipe including necessary fixing accessories

Supply & laying of Sub main wiring with PVC insulated FR stranded copper conductor of size 2.5 Sq mm x 2 runs + 1 run of 2.5 sq mm for earth wire in 25mm dia PVC casing N capping / conduit pipe complete with all fixing accessories like elbow, bent, tee etc complete. (UPS POWER CIRCUIT)

Supply & drawing of Sub – Circuit 2 runs of 2.5 Sq.mm + 1 run of 2.5 Sq.mm FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. (For RAW Power Circuit)

Lighting point wiring, the point wiring includes 20 mm thick PVC conduit pipe in ceiling/ wall concealed type, for main circuit 2.5 sq mm multi stand copper wire, for control wire 1.5 sq mm including switch, hylem plate, modular boxes etc., complete in all respect.

Supply and fixing on existing metal box halym switch plate with require no. of MCBs/cuttings with modular switches to be fixed interconnection etc. Complete in all respect 10’’x13’’- 2 nos switches

Supply & installation of 5/15A Power socket outlet controlled by 20A single pole switch with indicator housed in PVC boxes, Fitted at sitting desk as required by client (3 modular box brown colour for RAW Power Points) Make-Legrand, Cona, Roma, G.M.

Supply & installation of 5/15A Power socket outlet controlled by 20A single pole switch with indicator housed in PVC boxes, Fitted at sitting desk as required by client (8 modular box white colour for UPS Power Points) Make-Legrand, Cona, Roma, G.M.

Supply & Fixing of 3’’ PVC Casing & Caping for routing of wiring wherever required

Supply & Fixing of 1’’ PVC Casing & Caping for routing of wiring wherever required

Supply and Laying of 2.5 sq mm 4 Core PVC Flexible copper cable through PVC pipe to individual A/c indoor unit to outdoor unit including necessary fixing accessories.

Supply & Wiring 2 x 4Sq mm wire in conduits or wire race ways. Supply & Wiring 1 x 2.5 Sq mm wire in conduits or wire race ways. (RAW Power DB to industrial plug top)

Supply and fixing of MCB 2 Pole: 20 Amps along with industrial socket plug & box charges including necessary termination of wires, testing and commissioning of circuit.

Supply and fixing of MCB 4 Pole: 32 Amps along with industrial socket plug & box charges including necessary termination of wires, testing and commissioning of circuit.

Installation of exhaust fan Upto 450 mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supply of Decorative Wall light of 2' LED with 10W system wattage. Rated life shall be L70 @ 50000Hrs. which shall has inbuilt electrical protection like over/under voltage, short circuit, over load, open circuit & miswiring. Driver is on constant current driver output driver @ 0.6A with PF >0.9 with line voltage @ 220-240V @ 50/60Hz, driver efficency> 85% & THD < 15%. LED Efficeiency> 130 lm/W at 1W & fixture efficiency > 100Lm/W with CRI >75 with injection moulded polycarbonate lens. Similar to Havells LUMILINE+BS10WLED865SPCSS

Supply , Installation, commissioning & testing of 6 Module box to be accommodated with 01No of 10Amps MCB & 02Nos of 5/15A power socket outlet fixed on wall (with boxes) 5A indicator switch type, housed in table as required by client.(For RAW power ) Make: Anchor, Legrand, Roma, Havells

The premium executive table (Main Table+ Ped+ Return table) size shall be : 2400 Width mm x 1104 Depth mm x 735 Height mm. The top panel shall be 40 mm thick(18 mm MDF + 18 mm MDF batons + 4 mm Natural Veneer) Veneered portion of work surface is finished with high gloss polyster. The under structure shall be having legs made from 1.6 mm thick MS clad with the strips of MFC (Medium Density fiber). Hollow construction of legs facilitates wire management. The modesty & side panel should be 18 mm thick MDF plus pigmented black and coated with melamine. The storage shall be having drawer unit unit body shall be constructed from 18 mm thick MDF boards has combination of 2 box drawers + 1 filling drawer. Drawers should be mounted on double extension ball slides + drawer fronts should be of natural veneer coated with High gloss Polyster and made of 23 mm (18 mm MDF + 4 mm Natural Veneer + 1 mm DL) and drawer body made of 14 mm MDF (12 mm MDF + 1 mm DL + 1 mm DL). The Premium executive table ERU size shall be : 1400 Width mm x 580 Depth mm x 690 Height mm. The top panel shall be 40 mm thick (18 mm MDF + 18 mm MDF batons + 4 mm Natural Veneer) Veneered portion of work surface is finished with high gloss polyster. The under structure shall be having the modesty panel of 18 mm thick MDF plus pigmented black and coated with melamine. The storage shall be having drawer unit unit body shall be constructed from 18 mm thick MDF boards has combination of 2 box drawers + 1 filling drawer . Drawers should be mounted on double extension ball slides + drawer fronts should be of natural veneer coated with High gloss Polyster and made of 23 mm (18 mm MDF + 4 mm Natural Veneer + 1 mm DL) and drawer body made of 14 mm MDF (12 mm MDF + 1 mm DL + 1 mm DL). Preferable model: Featherlite Elite EBJ-01D24 Brands: Godrej/Featherlite/Durian/Damro/Wipro

Back unit-Premium suite model of size 165cm (Back unit) The Back unit size shall be of : 1860 Width mm x 560 Depth mm x 670 Height mm. The door shall be 23 mm thick ( 18 mm thick Batons + 4 mm Veneer + 1 mm Backing Decorated ( BDL) ) . The Shelves and Partitions should be of 18 mm thick MDF (Medium density fiber) + Pigmented Black and coated with Melamine. Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom, back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security. Display/Storage Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, back and shelves. Doors are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to op. Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Preferable model: Featherlite Senate HT 501A

Supply & Installation of High Back revolving chair. Overall Dimensions of Chair-Seat Height - min 49.9 to max 58.9 cm. Total Height - min 134.9 to 143.9 cm. Width & Depth of Chair as measured from pedestal - Width 77 cm and Depth 77 cm • Seat/back assembly: The seat should be made up of 1.2 ± 0.1cm. Thick hot-pressed plywood and upholstered with leather and moulded polyurethane foam. The back foam should be designed with contoured lumber support for extra comfort. back size: 53.0cm.(w) x 95.4cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) the hr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thkhr steel and should be black powder-coated (dft 40-60 microns ) Armrest assay: the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. The p.u. armrest should be made of black integral skin polyurethane with 50-70 shore hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather The mechanism should be designed with the following features: * 360° revolving type, * seat back tilting ratio of 1 : 1.5 * Front pivot for tilt with feet resting on ground ensuring more comfort, * tilt tension adjustment, * 5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock should be released * Static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. it has an adjustment stroke of 9.0 ± 0.3cm the bellow should be 1 piece and blow moulded in black polypropylene the pedestal should be made of die-cast aluminum with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-centre dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon. Preferable model: Nilkamal Boss HB revolving chair Brands: Godrej/Featherlite/Durian/Damro/Wipro

• Supply& installation Mid Back revolving chair without Tilting Mechanism. • The seat should be made up of 1.2 ± 0.1cm. Thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. The back foam should be designed with contoured lumber support for extra comfort. • Back size:53.0cm.(w) x 73.0cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) thehr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thkhr steel and should be black powder-coated ( dft 40-60 microns ) the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. The p.u. armrest should be made of black integral skin polyurethane with 50-70 shore hardness and reinforced with m.s. insert. The armrest top should be made of abs & upholstered with foam & leather the seat base assy. should be designed with following features: 360° revolving type without back tilt. It has an adjustment stroke of 12.0 ± 0.3cm the bellow should be 3 piece telescopic types and injection moulded in black polypropylene the pedestal should be made of die-cast aluminum with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-centre dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon. • Overall Dimensions of Chair Seat Height - min 43.4 to max 55.4 cm. Back Height - min 99.4 to 111.4 cm. Preferable model: Nilakamal Boss Mid back revolving chair Brands: Godrej/Featherlite/Durian/Damro/Wipro

• SEAT/BACK ASSEMBLY: The seat is made up of 1.2 +0 1cm thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam The back is made up 1.2 TO 1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam The back ply and foam is designed with contoured lumber support for comfortable seating posture * MID BACK SIZE 48.5 cm (W) X 64.5 cm (H) * SEAT SIZE 51.0 cm (W) X 48.0 cm (D) • HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back is moulded with density = 45 +/-2 kg/m* and Hardness load 16 2 kgf as per IS 7888 for 25% compression • ARMRESTS (ADJUSTABLE):The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of B3 81z0 03 cm x 0 2-LO 01 cm thk M S E R W tube having chrome plated finish The armrest height adjustable up to 6 5z0 Scm in 5 steps • KNEE TILT SYNCHRO MECHANISM WITH SEAT DEPTH ADJUSTMENT * 360° revolving type Single point control * Single point control * Front pivot for tilt with feet resting on ground ensuring more comfort Tilt tension adjustment * 4-position locking with anti-shock feature Seat back tilting ratio of 1.2 * Seat depth adjustment of 6.0 +0 Scm can be locked in 6 positions • FRONT PIVOT SYNCHRO MECHANISM: The mechanism is designed with the following features * 360° revolving type Single point control * Front pivot for tilt with feet resting on ground ensuring more comfort Tilt tension adjustment * 4-position locking with anti-shock feature * knockdown condition vacations within +1 0 cm • ADJUSTABLE BACKREST: The back rest is connected to the mechanism with a drop-iift mechanism which can be adjusted in the range of 7.0 IO.5cm. And locked in 5 positions for the better lumbar support. • FIXED SPINE (COFERENCE/ VISITOR): The seat and back are arrested together with fixed type spine i.e no back up/down adjustment; made of 0.8 TO.05 cm thk HR Steel and is black powder-coated ( DFT 40-60 microns ) • HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.010.3 cm. • PEDESTAL ASSEMBLY: The pedestal is fabricated from 0.2 0.02 cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 66.010.Scm. Pitch-centre dia. (76.011.0 cm with castors). • TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. Mid Back (W)76.*(D)76*(H)93.4-110.4 (SH)47.5-57.5 cm Preferable model: Nilakamal Command mid back chair Brands: Godrej/Featherlite/Durian/Damro/Wipro

Supply & INSTALLATION OF Discussion table of 4 seater circular in shape of 110 cm 1150(Dia) x 740(Ht) Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing access flap provided for access to power supply and audio cables. Work top is available in two shapes Square and Pebble (Round) Side Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990 matching to the Worktop, Edge banded with matching 2 mm thick PVC lipping. Cutout with Gromet provided for routing cables in case any Audio-Visual equipment is to be fixed later. Understructure-The Under-structure consists of an Inner Tube Assembly with Top for Worktop Mounting and Base plate with levellers. The Top Plate is made of 5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of 8mm thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 25.4mmx 25.4mm x 1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138) welded together using Tungsten inert gas welding. The whole structure is epoxy polyester powder coated (DFT 40-60 microns). The product has a knock-down construction. Cutout for standard Preferable model: Godrej Mingle 4 seater standalone table Brands: Godrej/Featherlite/Durian/Damro/Wipro

Supply & Installation of 03-SEATER SOFA • SEAT FOAM: The seat is made up of PU foam in Density 28 ±2 kg/cum with an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. • BACK FOAM: The back is made up of PU foam in Density 28 ± 2 kg/cum with two additional top layer of super soft foam of density 32±2 kg/cum, upholstered with fabric or leatherette. • UNDERSTRUCTURE: Under structure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS: 303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over under structure for cushioning purpose. LEG ASSEMBLY: It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic end cap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45CM. Preferable model: Damro Sabeena 3+1+1 cushioned sofa set Brands: Godrej/Featherlite/Durian/Damro/Wipro

THREE-SEATER TUBULAR STEEL SOFA SET made of MS ERW Tube of Diameter 31.8 Mm x 2 Mm Thick powder coated • GENERIC Side Frame: G shaped Seating Capacity: THREE SEATER Backrest belt: N.A Armrest type: Fixed Armrest have pocket on ourter side: No Tie member connect the side frames at three places: YES • MATERIAL Material of backrest cover: fabric Material of frame for seat and Backrest: Moulded plywood of 12±1mm thickness Material of Seat cover: fabric Material of Seat: foam with 25 percent compression Seat Belt: N.A Material of Side Frame: MS ERW Tube Of Diameter 31.8 Mm x 2 Mm Thick Material used for connecting tie member and side frames: injected moulded black ABS and black oxidized socket head screws with nuts made of MS bright bars of diameter 15.8 mm with 8 mm BSW threads Density of foam for backrest ±5 (Kg/Cub M): 45 Density of foam for seat ±5 (Kg/Cub M): 45 Material of Backrest: foam with 25 percent compression Cover of Foam on armrest: leather cloth Compression of foam: 25 percent Thickness of Foam on armrest ±2 (mm): 45 millimeter GSM of seat, backrest and armrest cover (GSM) ±5%: 220 Shoes: plastic shoes Material of Tie member: MS ERW Tube Of Diameter 31.8 Mm x 2 Mm Thick • DIMENSION Seat Thickness ±2 (mm): 75 millimeter Seat Depth ±5(mm): 560 millimeter Seat Width ±5 (mm): 520 millimeter Backrest Thickness ±2 (mm): 45 millimeter Backrest Width ±5 (mm): 520 millimeter Backrest Height ±5 (mm): 420 millimeter Arm Depth ± 5(mm): 460 millimeter Arm width ±2 (mm): 100 millimeter Arm Height ±3 (mm): 280 millimeter Finish: Powder Coated Preferable model: Godrej Premium lounge tubular framed Brands: Godrej/Featherlite/Durian/Damro/Wipro

SINGLE SEATER TUBULAR STEEL SOFA SET made of MS ERW Tube of Diameter 31.8 Mm x 2 Mm Thick powder coated (1 seater sofa model of size 183 x 77.50 x 74.50 cm) • GENERIC Side Frame: G shaped Seating Capacity: Single SEATER Backrest belt: N.A Armrest type: Fixed Armrest have pocket on ourter side: No Tie member connect the side frames at three places: YES • MATERIAL Material of backrest cover: fabric Material of frame for seat and Backrest: Moulded plywood of 12±1mm thickness Material of Seat cover: fabric Material of Seat: foam with 25 percent compression Seat Belt: N.A Material of Side Frame: MS ERW Tube Of Diameter 31.8 Mm x 2 Mm Thick Material used for connecting tie member and side frames: injected moulded black ABS and black oxidized socket head screws with nuts made of MS bright bars of diameter 15.8 mm with 8 mm BSW threads Density of foam for backrest ±5 (Kg/Cub M): 45 Density of foam for seat ±5 (Kg/Cub M): 45 Material of Backrest: foam with 25 percent compression Cover of Foam on armrest: leather cloth Compression of foam: 25 percent Thickness of Foam on armrest ±2 (mm): 45 millimeter GSM of seat, backrest and armrest cover (GSM) ±5%: 220 Shoes: plastic shoes Material of Tie member: MS ERW Tube Of Diameter 31.8 Mm x 2 Mm Thick • DIMENSION Seat Thickness ±2 (mm): 75 millimeter Seat Depth ±5(mm): 560 millimeter Seat Width ±5 (mm): 520 millimeter Backrest Thickness ±2 (mm): 45 millimeter Backrest Width ±5 (mm): 520 millimeter Backrest Height ±5 (mm): 420 millimeter Arm Depth ± 5(mm): 460 millimeter Arm width ±2 (mm): 100 millimeter Arm Height ±3 (mm): 280 millimeter Finish: Powder Coated Preferable model: Godrej Premium lounge tubular framed Brands: Godrej/Featherlite/Durian/Damro/Wipro

Supply & installation of Centre Coffee table with glass top, wooden legs 100 x 65 x 45 mm. • Overall Size: Width: 100cm Depth: 65cm Height: 45cm LEGS MATERIALS: Colour: cherry • TABLE TOP MATERIALS & SIZE: (tempered Glass/ 10mm), L X W X T: 1000x650x10mm Colour: clear. Preferable model: Godrej Alice coffee table Brands: Godrej/Featherlite/Durian/Damro/Wipro

Desking -Premium suit model of size 210*210*75 cm (Main Table +ELU+PED). Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Preferable model: Featherlite Senate HT 501 Brands: Godrej/Featherlite/Durian/Damro/Wipro

Back unit-Premium suite model of size 165cm (Back unit) Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom, back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security. Display/Storage Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, back and shelves. Doors are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Preferable model: Featherlite Senate HT 501A Brands: Godrej/Featherlite/Durian/Damro/Wipro

Supply & installation of High Back Pure leather revolving chair of size approximately 76.10L x 76.10D x 114-131.50H CM. The chair made by Leather high back chair, Back profile can be adjustable, Active Bio-synchro Mechanism. The chair comes with 5 position tilt limiter. Preferable model: Nilakamal Boss HB revolving chair Brands: Godrej/Featherlite/Durian/Damro/Wipro

Supply & installation of Mid Back Pure leather revolving chairs for visitors size approximately 76.10L x 76.10D x 96.50-114H CM. The chair made by Leather high back chair, Back profile can be adjustable, Active Bio-synchro Mechanism. The chair comes with 5 position tilt limiter. Preferable model: Nilakamal Boss MB revolving chair Brands: Godrej/Featherlite/Durian/Damro/Wipro

Desking -Premium suit model of size 180*210*75 cm (Main Table +ELU+PED). Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Preferable model: Featherlite Senate HT 528 Brands: Godrej/Featherlite/Durian/Damro/Wipro

Chair: large seat Depth + cross headrest + Coat hanger SEAT/BACK ASSEMBLY: The seat is made up of 1.2 * 0 fern thk hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 The Back is made up of injection moulded glass filled nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area. * SEAT SIZE(Larger Seat Depth) : 47. cm. W x 51.5 cm D * SEAT SIZE(Standard Seat Depth) 47 0 cm. (W) x 49.5 cm. (D) ” BACK SIZE : 45.0 cm. ”(W) x 65.3 cm. (M) HIGH RESILIENCE (HR) POLYURETHANE FOAM The HR poly methane seat foam is moulded with density 45+/-2 kg/m"" and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features » Up-Down adjustment— 8 steps (8.0+0.Scm range) • Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad Lumbar pad has an adjustment of 8 0 + 0.5 cm in height. FRONT PIVOT SY!’JCHRO MECHANISM: The adjustable tilting mechanism is designed. Preferable model: Nilakamal Matrix HB revolving chair

Supply of MID BACK CHAIR of Overall Dimensions shall be Chair-Seat Height - min 43.3cm to max 54.3cm. Height - min 89.5cm to max 100.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3cm and Depth- 76.3cm.Seat assembly: The seat assembly shall be made up of 1.2 ±0.1cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded polyurethane foam. Seat size: 47.0 cm. (w) x 48.0 cm. (d) Back assembly: The back asembly. shall be made of powder coated (oft 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2±0.016cm thick. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using double layer spacer mesh fabric with high tenacity yarn. Back size : 46.5 cm (w) x 60.5 cm (h).High Resilience (HR) polyurethane foam: The HR polyurethane foam shall be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. Armrests: The one-piece armrests shall be injection moulded from black co-polymer polypropylene. Centre-Tilt mechanism: The mechanism shall be designed with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • upright position locking. tilt tension adjustment. Pneumatic height adjustment: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.Telescopic bellow assy: The bellow shall be 3 piece telescopic type and injection moulded in black polypropylene. Pedestal assembly: The pedestal shall be injection moulded in black 33% glass-filled nylon66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm. Pitch-center dia. (76.3 ±1.0cm with castors.)Twin wheel castors: The twin wheel castors shall be injection moulded in black nylon etc. Preferable model: Nilakamal Matrix HB revolving chair

Supply of ‘L’ shaped Manager Table of size shall be 1650mm(L) x 750mm(D) and Return Table 1200mm(L) x 450mm(D) with one side attached Frame of Fabric Magnetic and White board. Work top shall be made up of 25mm thick prelaminated particle board interior grade (As per IS: 12823). Bottom shall have a backing laminate of minimum 0.6mm thickness. All the edges of work surface shall be provided with machine pressed 2mm thick PVC Edge band with glue of standard quality. The single side legs shall be used for supporting panels & work surface on one side only. Single side legs shall be fabricated by CO2 welding in MS Tube of section 38 mm x 25 mm (IS: 7138 ERW Tube) with the base plate of the MS plate of 35x22x5mm (IS: 2062, 5 mm HR) over which an M8 Leveler shall be fitted, which shall allow for adjustment of the height by 50mm and this shall be coated with minimum 45 micron thickness of epoxy powder coating. Body Panel Structure: uprights and horizontals shall be made of aluminum extrusion having material AL96063-T6 or equivalent and shall have an average wall thickness of 1.2 mm and also powder coated with epoxy-polyester powder. Fabricated bottom frame for 52.4mm shall be comprises of L- Channels and it shall be made of 2mm thick CRCA steel (IS:513), formed plates of 3mm thick HR steel (IS:2062) & ERW steel tube of size 35x15x1.6mm in oval cross section (IS:7138) welded together. This shall be coated with average 50 to 60 micron thickness of epoxy powder coating. The 52.4 mm panel has more elaborate and flexible construction offering various functional and decorative finishes as well as cable management capacity. Preferable model: Featherlite Senate HT 531 Brands: Godrej/Featherlite/Durian/Damro/Wipro

Supply of Mid Back Chair of size shall be : SEAT SIZE (Larger Seat Depth) : 47.00cm (W) x 51.50cm (D), SEAT SIZE (Standard Seat Depth) 47.00cm. (W) x 49.50cm.(D), BACK SIZE : 45.00 cm(W) x 65.3cm(H).The seat shall be made up of 1.2 + 0.1cm thick hot pressed plywood. The Back shall be made up of injection moulded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam shall be moulded with density 45+/-2 kg/cum and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest shall be designed with the following features: Up-Down adjustment— 8 steps (8 0+0.Scm range).Height adjustable armrest structure which shall be powder coated & fitted with an armrest top. Fixed Armrest Top shall be PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side. Lumbar pad shall be an adjustment of 8.0 + 0.5 cm in height. Preferable model: Nilakamal Eithan MB revolving chair Brands: Godrej/Featherlite/Durian/Damro/Wipro

Supply of RECTANGULAR SHAPED OFFICE WORKSTATION having overall size shall be 1200mm x 600mm and consists of Tile Based System of Thickness - 52mm, Height - 1200mm and 120mm gap from floor. The Understructure shall be constructed with MS Powder Coated Legs and the Worksurface shall be made up of 25mm thick Prelaminated Particle Board with PVC Edge. The Tile based system shall have Top tile each White board and remaining Fabric magnetic tiles. The Intermediate Blocks shall be Fabric and the Bottom tile shall be Metal. Wire management :- switches to be mounted on intermediate tiles/bottom metal tiles and accessed through cutout. Accessories: Key board tray, CPU Trolley, Mouse pad etc of superior make shall be attached with the workstation etc. Preferable model: Nilakamal Non sharing work stations Brands: Godrej/Featherlite/Durian/Damro/Wipro

Providing & fixing of modular 'L' Type customized work station of size 1450mm (l) x 600mm (w) x 1450mm (h) each, The table top made out of 25mm thick Pre-laminated particle board with PVC edge, the under structure made out of 25mm thick Pre-laminated particle board, Cable manager to be provided on the work surface and accessed through grommet cut out on the worktop, incl vertical movements of wires. Partition should be 75 mm thick , made out of PLB either sides , soft board and glass, partition height 1.20 m height with cable race ways at two level for drawing power / data / voice cable, height adjustable fixtures as per existing arrangement / shade. Stability of the structure individually and totally will be the responsibility of the vendor. All as per OEMs specification, Preferable model: Nilakamal Curviliner 4-pax cluster work stations Brands: Godrej/Featherlite/Durian/Damro/Wipro

Providing and fixing of 03 Drawer Mobile pedestal of size 390mm (L) x 435mm (W) x 646mm (H) (Box + Box + File) all as per OEM Specification and sample available at ADA. Preferable model: Godrej Nova 3 drawer storage Brands: Godrej/Featherlite/Durian/Damro/Wipro

Sliding computer key board tray of minimum size 473mm (L) X 200mm (D) metal tray is made of minimum 0.8 mm thick CRCA D grade as per IS-513 with sliding channels and other fixing fittings. The front face of tray shall match work surface edge. It should also have a Single extension ball slide assembly/Telescopic slider assembly, retro fit mouse tray. Brands: Godrej/Featherlite/Durian/Damro/Wipro

230-345W X 226D X 180H CPU Trolley is made of 1.0 mm thick MS CRCA Sheet and Side support is made of 0.8 mm thick MS CRCA Sheet Lockable/Non-lockable twin wheel castors are injection moulded in Black Nylon. Brands: Godrej/Featherlite/Durian/Damro/Wipro

Providing & fixing 2'-6" wide Conference Table. Table top to be made of 19mm thk BWR Block Board with additional 19mm thk BWR BB at edges for increasing the thickness of the table top. Table main and intermediate supports to be made of 1.5" x1.5" thk Aluminium frame work at 1'-6" c/c on both sides covered with 6mm thk BWR plywood, table edges to be fixed with wood beading [teak wood or equi.] of size 2"x1.5" thk with a cornice design as shown in the drawing. Table to have foot rest of 4"x2" size, fixed to the table supports. All outer exposed surface of table to be covered with approved 4mm thk veneer with necessary SS inlays and grooves and finished with melamine polish. Frames with openable shutters to be provided to run wiring below the table top and in apron and wire-managers to be provided as shown in the drawing. Cost inclusive of fixing 12mm thk float glass (with etching) of 9" wide with edges machine polished in the edge of the table, fixed to the table with wood beading. All as per drawings and/or instructions of the Engr. All materials to be approved by the ADA. Preferable model: Customized

Charges towards supply of chair for office meeting room chair. The knee tilt multi lock mechanism makes you feel like you are sitting on a cushion of air as it creates a smooth and balanced feel as you move from one position to the next Push the left-side lever up/down to unlock/lock reclining at multiple positions Seat: Depth- 45 cm, Width- 51 cm Dimensions: Width- 59 cm, Depth- 53 cm Minimum Height- HB: 112 cm; MB: 100 cm Maximum Height- HB: 107 cm; MB: 91 cm Minimum Seat Height- 52 cm Maximum Seat Height- 59 cm Width (Arm to Arm)- 52 cm Arm Rest Height- 23 cm Preferable model: Featherlite Sleek leather chair with SS frame Brands: Godrej/Featherlite/Durian/Damro/Wipro

Providing and fixing Storage Cabinet using 19mm thk BWR Block Board for main framework, 12mm thk BWR plywood for shelves and 8mm thk BWR plywood for backing. All outer exposed surfaces to be finished with 4mm thk veneer / 1mm thk laminate with necessary SS inlays and grooves as per drawing, internal surfaces to be finished with 1mm thk laminate. Storage to have SS brush finished handles, box hinges and locks of approved makes. All exposed plywood edges shall be covered with wood beading. All as per drawings and/or instructions of the Engr. All materials to be approved by the ADA. 18" deep storage. (1mm thk laminate for outer exposed surface and 0.8mm laminate for inner exposed surface) Preferable model: Customized

48 Port 100/1000 Managed switch with 4 combo SFP slots ( 48 RJ-45 10/100/1G BaseT, 2xSFP(1G) and 4xSFP+ (1G/10G) uplink/ stacking ports) Make: HP/Cisco/Alcatel

24 Port 100/1000 Managed switch with 4 combo SFP slots ( 24 RJ-45 10/100/1G BaseT, 2xSFP(1G) and 4xSFP+ (1G/10G) uplink/ stacking ports) Make: HP/Cisco/Alcatel

CAT6 UTP 24AWG Patch cord 1 meters. Plug 30U Snagless Make: Legrand/3c3/Comps cope

CAT6 UTP 24AWG Patch cord 2meters. Plug 30U Snagless Make: Legrand/3c3/Comps cope

Ethernet cable CAT6 UTP 23AWG Make: Legrand/3c3/Comps cope

24Port Cat6 UTP Patch Panel Fully Loaded Make: Legrand/3c3/Comps cope

Face Plate – single Make: Legrand/3c3/Comps cope

Face Plate – dual Make: Legrand/3c3/Comps cope

Face Plate – quad Make: Legrand/3c3/Comps cope

IO/Kye stone Make: Legrand/3c3/Comps cope

I/O Surface mount box Metal Type

15U Wall Mount Network Rack with 2nos Fan and 15Amp Power PDU Make: Valrack/Legrand/Startrnix

Laying of cable with proper flexible pipes, Conduits bought from vendor side, hardware, crimping & dressing of cables, installation of box/key stones, fixing of technical issues, configuration with ADA existing network lines, and also includes labour, transportation etc. Complete

AAYS Technologies And management (BID ID -3448222)

PNR INTERIOR SOLUTIONS PVT LTD (BID ID -3450020)

MBTECH (BID ID -3450517)

TECKXPERT ENTERPRISES (BID ID -3448854)

G CONS (BID ID -3448354)