GE/TVL/8241

Amount

SCHEDULE 'A' PART-I [ B/R WORKS]

Taking down cement plaster on brick or stone wall and concrete surfaces etc including racking out joints, hacking for key, scrubing down with water etc.

M&L for rendering 15mm thick in two coats (10+5) on brick or concrete surfaces in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) mixed with liquid water proofing compound 0.2% by weight of cement used upto 8 m height including necessry scafolding complete all as specified and as directed. Note : Water proofing compound shall be measured and paid seperately.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for rendering 10mm thick on brick or concrete surfaces in CM 1:6 on fair faces of brick work or concrete surfaces on wall surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L white washing three coats including preparation of new plastered surfaces of walls complete all as specified and as directed.

M & L for preperation of new plastered surfaces and applying two coat of superior quality anti algae wether proof acrylic paint exterior grade (APEX) over a coat of exterior grade primer on external surface complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for 40mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floor complete all as specified

Material and labour for joint free Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete.

All as per above item No. 10 but in skirting/dado including backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.

Material and labour for joint free Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete.

Material and labour for glazed ceramic coloured tiles of size 300x450mmx7mm/350x250x7mm thick on vertical surfcaes such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L Cement concrete type D-2 1:4:8, (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Demolition of brick work or stone/boulder built in time mortar or cement mortar including all coins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight of curved on plan exc 6m mean radius built in in CM 1:6 complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level) including removel of debris/demolished materials to a distance exc 50m and n.exc 250 m as directed by Engr-in-Charge.

Material and labour for 100mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in floor complete all as specified

M&L for 75mm thick PCC type C-2 , 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and fair without using extra cement all as directed

M&L for 75mm thick PCC type B-1 , 1:2:4 (20mm graded stone aggregate) as in path and hardstanding finished even and fair without using extra cement all as directed

Material and labour for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in cills, steps; seismic , parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

Site clearance by Scraping of grass/wild growth/trees n.exc 0.30m girth etc in soft/loose soil by manually/mechanically including removing of rubbish from the site to a distance exc, 250m but n. exc 500m and deposited where directed at a level not exc. 1.5m above the starting point, complete all as specified and as directed

Taking up or down 20 mm bore GI water tubing with fittings including cleaning for re-fixing or removing from site of size complete all as specified and as directed.

Taking up or down 25 bmm bore GI water tubing with fittings including cleaning for re-fixing or removing from site of size complete all as specified and as directed.

Supplying and fixing or laying 20 mm dia CPVC pipe SDR 13.50 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge.

Supplying and fixing or laying 25 mm dia CPVC pipe SDR 13.50 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge.

Taking down unserviceable IWC & Supply & fix Vitreous china squatting pan 'Orissa' pattern of size 580mm ˣ 440mm white withintegral foot rest excluding flushing cistern & flush pipe including provision of lime concrete bedding fixed in repairs

S&F in repairs Vitreous china wash down water closet pan pedestal pattern (EWC) including plastic water closet seat, closet pattern with flat bottom, and cover and aluminised hinge device complete all as specified and directed by EIC.

Supply and fixing in repair PVC valve less syphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets 10 Ltrs capacity including flush pipe and PVC connections etc., complete

S&F in repair vitreous china wash basin size 550 x 400 mm white flat back excluding taps waste chain and plug and porcelain stopper but including brackets fixed in repairs complete all as specified and as directed.

Supply and fixing in repairs 32mm PVC waste pipe for wash hand basin., 900mm long complete all as specified and as directed.

Supply and fixing 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed..

S&F Hand shower health faucet Abs body with wall hook and 1 meter long easy flex tube in chrome finish hose pipe for EWC including hinges with complete fitting : Make Jaquar (ALD -CHR-579) or eqivalent as approved.

Supply only pillar taps, fancy type, chromium plated, screwed down high pressure screwed for iron pipe, fancy type 15 mm dia bore fixed in repairs complete all as specified and as directed.

Supply and fixing in repair bib taps fancy type with flanges chromium plates screwed down high pressure for 15 mm dia bore pipe complete all as specified and as directed.

Supply and fixing in repair two way bib taps fancy type with flanges chromium plates screwed down high pressure for 15 mm dia bore pipe (JAQUAR : CON-041KN)

S&F in repairs brass chromium plated shower rose Continental series with shower arm 105mm size joints fixing to steel pipe complete all as specified and directed.

S&F Tubular towel rail brass chromium plated (60 CM long) between flanges complete all as specified and as directed

Supply & fixing in repairs peg set suitable with 6 Nos of hook with powder coated fixed to wall complete all as specified as directed.

Supply and fixing for PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and as directed.

Supply and fixing of 32mm dia CPVC Pipe Supply and fixing fittings on walls/ ceiling or laying in floors complete all as specified.

Taking down PVC pipe of any dia fixed in any position complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing in 75 mm PVC (SWR) floor trap plain with grating including jonting with solvent cement complete, all as specified and as directed.

Supply and fixing of 125/110 mm PVC gully trap with PTMT gratings fixed in cement concrete(1:2:4) type B1 all as specified and directed.

S & F in repairs PVC (SWR) P trap 110mm bore complete all as specified and as directed.

Supplying and fixing in repair stop valves with flange fancy type chromium plated with long shank and cup (concealed type) for 15 mm dia bore pipe complete all as specified and as directed.

S & F in repair Angular cock with Flange, fancy type chromium plated with long shank and cup (concealed type) for 15 mm dia bore pipe complete all as specified and directed

Supply and fixing in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) and fixed in position all as specified in SSR Pt- I complete all as specified and as directed.

Supply and fixing of ball brass valve, high pressure with polythene float and fly nut,screwed for iron pipe or brass ferrule of size 20 mm complete.

Taking down Chowkhats or frames (without taking of shutter) not exc. 1.5 sq. m each all as specified and directed.

Taking down chowkats or frame exceeding 1.50 Sq.m but not exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each including repairing and refixing in the same opening complete

M&L Powder coated Aluminium anodised frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc complete all as specified.

M&L Powder coated Anodised aluminium door shutters, aluminium section weighing not less than 1 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc complete all as specified.

M&L Powder coated Anodised aluminium window shutters, side hung type or sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified.

M&L Powder coated Anodised aluminium ventilator shutters, side hung type or top hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified.

M&L sheet glass ordinary quality and glazing 5.5mm thick in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L Flush door shutters, 30mm thick, solid core construction, with both faces is covered with deco rative face veneer with lipping/frame to match complete all as specified and as directed.

S&F glazed or gauged shutter 35 mm thick, 2nd class hard wood, divided into squares with plain, chamfered or rounded, mitered and rebated with sash bars any numbers, provided with stiles and rails, sizes at members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) all as per specified and as directed.

Material and labour for preparation of new wooden surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F aluminium wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire stables complete all as specified and as directed.

S&F in repairs aluminium wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire stables complete all as specified and as directed.

S and F 100mm Butt hinges, heavy weight cold rolled mild steel hinge complete all as specified and as directed.

Supply and fixing aluminum alloy, anodized, sliding door bolt of length 300mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 200mm long complete all as specified and as directed.

Supplying and fixing Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and as directed.

Taking out unserviceable double action spring hinge from door shutter and supply and fixing of new MS double action spring hinge,125mm size with steel wire spring ,stove enamelled black fixed to metal door frame by welding complete as directed

S&F factory made solid pannel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside the solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the ms frame welded/sealed to the stiles and rail with suitable pvc sheet beading, and jointed together with solvent cement, supplied and fixed in repair in the frame at site on per specification and drawings complete all as specified and as directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specification and drawing complete as directed.

Supply and fixing stainless steel Butt hinges 100mm size fixed to PVC frames complete all as specified and as directed.

Supply and fixing 100mm size aluminum handles, cast type anodised complete all as specified and as directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

M&L for complete removal and existing treatment on surfaces of wall etc by washing rubbing down and scraping down surfaces and applying Two coat of oil bound distemper over a coat of primer including 2mm thick wall care putty complete all as specified and directed

M&L for preparation of plastered or unplastered old surfaces of walls and apply one coat of white wash complete all as specified.

M&L for preparation of plastered or unplastered old surfaces of ceiling and apply one coat of white wash complete all as specified.

M&L for preparing old distempered surfaces by washing down applying one coat of Oil bound distemper complete all as directed.

M&L for preparing old decorated wooden or wood based surfaces over 10cm width or girth and applying two coats of synthetic enamel paint complete all as directed.

M&L for prepararing old decorated steel surfaces by washing down over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Material and labour for preparation of old decorated surfaces of wall by washing rubbing down and stopping of painted surfaces and applying one coat of superior quality anti algae wether proof acrylic paint exterior grade on external surface complete all as specified and directed.

M&L for complete removal and existing treatment on surfaces of wall chajjas etc by washing rubbing down and scraping down surfaces and applying Two coat of superior quality anti algae weather proof acrylic paint exterior grade on external surface over a coat of primer complete all as specified and directed

M & L for Continuous brick edging with fly ash bricks; with width equal to the depth of the brick, laid dry, on required angle complete

M & L for Sand filling under floors or in foundations including watering and consolidation including removal of existing aggregates complete all as specified and as directed.

M & L for spraying of Roundup Carbgrass destroyer with glyphosate chemical at the rate of 5 litre per 50 Sqm at transformer areas complete all as specified and as directed

M & L for Loose filling with aggregates of gauge 40 to 80 mm spread and levelled in layers n.exc 15cm thick complete all as specified and as directed.

Dismantling posts or struts embedded in PCC (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismanting of Barbed wire fencing or any type and size complete all as specified and as directed.

Excavating post holes or similer holes. Each not exceeding 0.5Cu M. getting out in Soft/Loose soil,returning,fillng in and ramming earth or broken rubble mixing with earh around in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and as directed.

Plain Cement Concrete type C2 1:3:6 (using 40 mm graded granite stone aggregate) in foundations,filling and mass concrete complete all as specified and as directed

M & L for MS work like posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work complete all as specified and as directed

M & L for Mild steel screw bolts 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm and n.exc 10cm long complete

M & L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

M & L for preperation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide, primer exceeding 10cm in width or girth not otherwise described.

M & L for preperation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide, primer not exceeding 10cm in width or girth not otherwise described.

Supply only 50x50 mm mesh size and 4.00mm dia wire Chain link MS galvanisd fencing, any size or type complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

S&F galavanized. 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and galvanized coating of steel wire shall confirm to the requirement as laid down for medium coated wire in IS 4826 and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc complete all as specified and as directed.

M & L for Framed work such as grills, gratings & gates of ornamental and intricate design with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and similar work including MS sheets fixed to framework and con- forming to Fe.290.Gde-E-165 including for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete

Dismantling brick tiles or terracing tiles, single layer on roofs including cement screed in roof complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for upto existing RCC roof top surfaces complete all as specified and directed.

M and L for PCC 1:2:4 type B-0, (using 20mm graded aggregate) as padding concrete over roof complete all as specified and as directed.

Supply and laying the APP polymeric water proofing membarance of 3 kg/sqm of black finished reinforced with non-woven poleyster matt. With a thermofusible finish laid over 1.5 kg/sqm bitumen grade 85/25 over compatible bitumen primer at the rate of 1.20 Kg/Sqm torching overlaps with a propane or a butane gas torch with a overlap of 75 mm at the sides and 100 mm at the ends and sealing applying a coat of cold emulsion bituminous primer all as per manufacturers instructions, over and including 10 mm thick cement mortar 1:4 plastering to be finished even and smooth (without using extra lime or cement) using WPC @ 3% per cement bag or manufacturing instruction and applying two coat of aluminium paint over APP, complete all as specified and directed. Note : Water proofing compound shall meadsured and paid seperately

Supply only liquid water proofing compound complete all as specified and as directed.

Cleaning of semi under groung sump capacity 382000 Ltrs, by pumping out complete water, taking out and removing complete mud/dirt/silt/sand, sludge from inside and depositing at a distance n.exc 50m away from the sump. Cleaning the bottom floor and inside wall, using scrubbers/brush and washing of inner surface using lime and bleaching powder and removing the same until clean surface is obtained, applying one coat white wash on inner surface (once in six month), black synthetic enamel painting single coat on metal surface of ladder, man hole covers etc., including written tank capacity and cleaning date with white paint of the base is black paint complete all as specified and directed for following UG/HT Tank including cutting of bushes, plants etc., cleaning of surrounding area up to 5.0m complete all as specified and directed by Engr-in-charge. Note : The rates quoted item shall deemed to include minor repairs of surface wall plaster minor spares etc requisted during cleaning. Location : MES Pump house

All as per Item Sl No. 119, but of 225000 Ltrs capacity. Location : MES Pump house

All as per Item Sl No. 119, but of 45000 Ltrs capacity. Location : MES Pump house

All as per Item Sl No.119, but OVER HEAD tank 364000 Ltrs capacity. Location : MES Pump house

All as per Item Sl No. 119, but OVER HEAD tank 200000 Ltrs capacity. Location : Near 54 Leading Md Accn

All as per Item Sl No. 119, but OVER HEAD tank 10000 Ltrs capacity. Location : Power House, MT Pool and MT Pool

All as per Item Sl No. 119, but STATIC WATER tank Size 18x6x2.5m.